You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
xserver/hw/xfree86/drivers/modesetting/pageflip.c

469 lines
16 KiB
C

/*
* Copyright © 2014 Intel Corporation
*
* Permission to use, copy, modify, distribute, and sell this software and its
* documentation for any purpose is hereby granted without fee, provided that
* the above copyright notice appear in all copies and that both that copyright
* notice and this permission notice appear in supporting documentation, and
* that the name of the copyright holders not be used in advertising or
* publicity pertaining to distribution of the software without specific,
* written prior permission. The copyright holders make no representations
* about the suitability of this software for any purpose. It is provided "as
* is" without express or implied warranty.
*
* THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
* EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
* DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
* OF THIS SOFTWARE.
*/
#ifdef HAVE_DIX_CONFIG_H
#include "dix-config.h"
#endif
#include <xserver_poll.h>
#include <xf86drm.h>
#include "driver.h"
/*
* Flush the DRM event queue when full; makes space for new events.
*
* Returns a negative value on error, 0 if there was nothing to process,
* or 1 if we handled any events.
*/
int
ms_flush_drm_events(ScreenPtr screen)
{
ScrnInfoPtr scrn = xf86ScreenToScrn(screen);
modesettingPtr ms = modesettingPTR(scrn);
struct pollfd p = { .fd = ms->fd, .events = POLLIN };
int r;
do {
r = xserver_poll(&p, 1, 0);
} while (r == -1 && (errno == EINTR || errno == EAGAIN));
/* If there was an error, r will be < 0. Return that. If there was
* nothing to process, r == 0. Return that.
*/
if (r <= 0)
return r;
/* Try to handle the event. If there was an error, return it. */
r = drmHandleEvent(ms->fd, &ms->event_context);
if (r < 0)
return r;
/* Otherwise return 1 to indicate that we handled an event. */
return 1;
}
#ifdef GLAMOR_HAS_GBM
/*
* Event data for an in progress flip.
* This contains a pointer to the vblank event,
* and information about the flip in progress.
* a reference to this is stored in the per-crtc
* flips.
*/
struct ms_flipdata {
ScreenPtr screen;
void *event;
ms_pageflip_handler_proc event_handler;
ms_pageflip_abort_proc abort_handler;
/* number of CRTC events referencing this */
int flip_count;
uint64_t fe_msc;
uint64_t fe_usec;
uint32_t old_fb_id;
};
/*
* Per crtc pageflipping information,
* These are submitted to the queuing code
* one of them per crtc per flip.
*/
struct ms_crtc_pageflip {
Bool on_reference_crtc;
/* reference to the ms_flipdata */
struct ms_flipdata *flipdata;
};
/**
* Free an ms_crtc_pageflip.
*
* Drops the reference count on the flipdata.
*/
static void
ms_pageflip_free(struct ms_crtc_pageflip *flip)
{
struct ms_flipdata *flipdata = flip->flipdata;
free(flip);
if (--flipdata->flip_count > 0)
return;
free(flipdata);
}
/**
* Callback for the DRM event queue when a single flip has completed
*
* Once the flip has been completed on all pipes, notify the
* extension code telling it when that happened
*/
static void
ms_pageflip_handler(uint64_t msc, uint64_t ust, void *data)
{
struct ms_crtc_pageflip *flip = data;
struct ms_flipdata *flipdata = flip->flipdata;
ScreenPtr screen = flipdata->screen;
ScrnInfoPtr scrn = xf86ScreenToScrn(screen);
modesettingPtr ms = modesettingPTR(scrn);
if (flip->on_reference_crtc) {
flipdata->fe_msc = msc;
flipdata->fe_usec = ust;
}
if (flipdata->flip_count == 1) {
flipdata->event_handler(ms, flipdata->fe_msc,
flipdata->fe_usec,
flipdata->event);
drmModeRmFB(ms->fd, flipdata->old_fb_id);
}
ms_pageflip_free(flip);
}
/*
* Callback for the DRM queue abort code. A flip has been aborted.
*/
static void
ms_pageflip_abort(void *data)
{
struct ms_crtc_pageflip *flip = data;
struct ms_flipdata *flipdata = flip->flipdata;
ScreenPtr screen = flipdata->screen;
ScrnInfoPtr scrn = xf86ScreenToScrn(screen);
modesettingPtr ms = modesettingPTR(scrn);
if (flipdata->flip_count == 1)
flipdata->abort_handler(ms, flipdata->event);
ms_pageflip_free(flip);
}
static Bool
do_queue_flip_on_crtc(modesettingPtr ms, xf86CrtcPtr crtc,
uint32_t flags, uint32_t seq)
{
return drmmode_crtc_flip(crtc, ms->drmmode.fb_id, flags,
(void *) (uintptr_t) seq);
}
enum queue_flip_status {
QUEUE_FLIP_SUCCESS,
QUEUE_FLIP_ALLOC_FAILED,
QUEUE_FLIP_QUEUE_ALLOC_FAILED,
QUEUE_FLIP_DRM_FLUSH_FAILED,
};
static int
queue_flip_on_crtc(ScreenPtr screen, xf86CrtcPtr crtc,
struct ms_flipdata *flipdata,
int ref_crtc_vblank_pipe, uint32_t flags)
{
ScrnInfoPtr scrn = xf86ScreenToScrn(screen);
modesettingPtr ms = modesettingPTR(scrn);
drmmode_crtc_private_ptr drmmode_crtc = crtc->driver_private;
struct ms_crtc_pageflip *flip;
uint32_t seq;
flip = calloc(1, sizeof(struct ms_crtc_pageflip));
if (flip == NULL) {
return QUEUE_FLIP_ALLOC_FAILED;
}
/* Only the reference crtc will finally deliver its page flip
* completion event. All other crtc's events will be discarded.
*/
flip->on_reference_crtc = (drmmode_crtc->vblank_pipe == ref_crtc_vblank_pipe);
flip->flipdata = flipdata;
seq = ms_drm_queue_alloc(crtc, flip, ms_pageflip_handler, ms_pageflip_abort);
if (!seq) {
free(flip);
return QUEUE_FLIP_QUEUE_ALLOC_FAILED;
}
/* take a reference on flipdata for use in flip */
flipdata->flip_count++;
while (do_queue_flip_on_crtc(ms, crtc, flags, seq)) {
/* We may have failed because the event queue was full. Flush it
* and retry. If there was nothing to flush, then we failed for
* some other reason and should just return an error.
*/
if (ms_flush_drm_events(screen) <= 0) {
/* Aborting will also decrement flip_count and free(flip). */
ms_drm_abort_seq(scrn, seq);
return QUEUE_FLIP_DRM_FLUSH_FAILED;
}
/* We flushed some events, so try again. */
xf86DrvMsg(scrn->scrnIndex, X_WARNING, "flip queue retry\n");
}
/* The page flip succeeded. */
return QUEUE_FLIP_SUCCESS;
}
#define MS_ASYNC_FLIP_LOG_ENABLE_LOGS_INTERVAL_MS 10000
#define MS_ASYNC_FLIP_LOG_FREQUENT_LOGS_INTERVAL_MS 1000
#define MS_ASYNC_FLIP_FREQUENT_LOG_COUNT 10
static void
ms_print_pageflip_error(int screen_index, const char *log_prefix,
int crtc_index, int flags, int err)
{
/* In certain circumstances we will have a lot of flip errors without a
* reasonable way to prevent them. In such case we reduce the number of
* logged messages to at least not fill the error logs.
*
* The details are as follows:
*
* At least on i915 hardware support for async page flip support depends
* on the used modifiers which themselves can change dynamically for a
* screen. This results in the following problems:
*
* - We can't know about whether a particular CRTC will be able to do an
* async flip without hardcoding the same logic as the kernel as there's
* no interface to query this information.
*
* - There is no way to give this information to an application, because
* the protocol of the present extension does not specify anything about
* changing of the capabilities on runtime or the need to re-query them.
*
* Even if the above was solved, the only benefit would be avoiding a
* roundtrip to the kernel and reduced amount of error logs. The former
* does not seem to be a good enough benefit compared to the amount of work
* that would need to be done. The latter is solved below. */
static CARD32 error_last_time_ms;
static int frequent_logs;
static Bool logs_disabled;
if (flags & DRM_MODE_PAGE_FLIP_ASYNC) {
CARD32 curr_time_ms = GetTimeInMillis();
int clocks_since_last_log = curr_time_ms - error_last_time_ms;
if (clocks_since_last_log >
MS_ASYNC_FLIP_LOG_ENABLE_LOGS_INTERVAL_MS) {
frequent_logs = 0;
logs_disabled = FALSE;
}
if (!logs_disabled) {
if (clocks_since_last_log <
MS_ASYNC_FLIP_LOG_FREQUENT_LOGS_INTERVAL_MS) {
frequent_logs++;
}
if (frequent_logs > MS_ASYNC_FLIP_FREQUENT_LOG_COUNT) {
xf86DrvMsg(screen_index, X_WARNING,
"%s: detected too frequent flip errors, disabling "
"logs until frequency is reduced\n", log_prefix);
logs_disabled = TRUE;
} else {
xf86DrvMsg(screen_index, X_WARNING,
"%s: queue async flip during flip on CRTC %d failed: %s\n",
log_prefix, crtc_index, strerror(err));
}
}
error_last_time_ms = curr_time_ms;
} else {
xf86DrvMsg(screen_index, X_WARNING,
"%s: queue flip during flip on CRTC %d failed: %s\n",
log_prefix, crtc_index, strerror(err));
}
}
Bool
ms_do_pageflip(ScreenPtr screen,
PixmapPtr new_front,
void *event,
int ref_crtc_vblank_pipe,
Bool async,
ms_pageflip_handler_proc pageflip_handler,
ms_pageflip_abort_proc pageflip_abort,
const char *log_prefix)
{
#ifndef GLAMOR_HAS_GBM
return FALSE;
#else
ScrnInfoPtr scrn = xf86ScreenToScrn(screen);
modesettingPtr ms = modesettingPTR(scrn);
xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn);
drmmode_bo new_front_bo;
uint32_t flags;
int i;
struct ms_flipdata *flipdata;
ms->glamor.block_handler(screen);
new_front_bo.gbm = ms->glamor.gbm_bo_from_pixmap(screen, new_front);
new_front_bo.dumb = NULL;
if (!new_front_bo.gbm) {
xf86DrvMsg(scrn->scrnIndex, X_ERROR,
"%s: Failed to get GBM BO for flip to new front.\n",
log_prefix);
return FALSE;
}
flipdata = calloc(1, sizeof(struct ms_flipdata));
if (!flipdata) {
drmmode_bo_destroy(&ms->drmmode, &new_front_bo);
xf86DrvMsg(scrn->scrnIndex, X_ERROR,
"%s: Failed to allocate flipdata.\n", log_prefix);
return FALSE;
}
flipdata->event = event;
flipdata->screen = screen;
flipdata->event_handler = pageflip_handler;
flipdata->abort_handler = pageflip_abort;
/*
* Take a local reference on flipdata.
* if the first flip fails, the sequence abort
* code will free the crtc flip data, and drop
* its reference which would cause this to be
* freed when we still required it.
*/
flipdata->flip_count++;
/* Create a new handle for the back buffer */
flipdata->old_fb_id = ms->drmmode.fb_id;
new_front_bo.width = new_front->drawable.width;
new_front_bo.height = new_front->drawable.height;
if (drmmode_bo_import(&ms->drmmode, &new_front_bo,
&ms->drmmode.fb_id)) {
if (!ms->drmmode.flip_bo_import_failed) {
xf86DrvMsg(scrn->scrnIndex, X_WARNING, "%s: Import BO failed: %s\n",
log_prefix, strerror(errno));
ms->drmmode.flip_bo_import_failed = TRUE;
}
goto error_out;
} else {
if (ms->drmmode.flip_bo_import_failed &&
new_front != screen->GetScreenPixmap(screen))
ms->drmmode.flip_bo_import_failed = FALSE;
}
/* Queue flips on all enabled CRTCs.
*
* Note that if/when we get per-CRTC buffers, we'll have to update this.
* Right now it assumes a single shared fb across all CRTCs, with the
* kernel fixing up the offset of each CRTC as necessary.
*
* Also, flips queued on disabled or incorrectly configured displays
* may never complete; this is a configuration error.
*/
for (i = 0; i < config->num_crtc; i++) {
enum queue_flip_status flip_status;
xf86CrtcPtr crtc = config->crtc[i];
drmmode_crtc_private_ptr drmmode_crtc = crtc->driver_private;
if (!xf86_crtc_on(crtc))
continue;
flags = DRM_MODE_PAGE_FLIP_EVENT;
if (ms->drmmode.can_async_flip && async)
flags |= DRM_MODE_PAGE_FLIP_ASYNC;
/*
* If this is not the reference crtc used for flip timing and flip event
* delivery and timestamping, ie. not the one whose presentation timing
* we do really care about, and async flips are possible, and requested
* by an xorg.conf option, then we flip this "secondary" crtc without
* sync to vblank. This may cause tearing on such "secondary" outputs,
* but it will prevent throttling of multi-display flips to the refresh
* cycle of any of the secondary crtcs, avoiding periodic slowdowns and
* judder caused by unsynchronized outputs. This is especially useful for
* outputs in a "clone-mode" or "mirror-mode" configuration.
*/
if (ms->drmmode.can_async_flip && ms->drmmode.async_flip_secondaries &&
(drmmode_crtc->vblank_pipe != ref_crtc_vblank_pipe) &&
(ref_crtc_vblank_pipe >= 0))
flags |= DRM_MODE_PAGE_FLIP_ASYNC;
flip_status = queue_flip_on_crtc(screen, crtc, flipdata,
ref_crtc_vblank_pipe,
flags);
switch (flip_status) {
case QUEUE_FLIP_ALLOC_FAILED:
xf86DrvMsg(scrn->scrnIndex, X_WARNING,
"%s: carrier alloc for queue flip on CRTC %d failed.\n",
log_prefix, i);
goto error_undo;
case QUEUE_FLIP_QUEUE_ALLOC_FAILED:
xf86DrvMsg(scrn->scrnIndex, X_WARNING,
"%s: entry alloc for queue flip on CRTC %d failed.\n",
log_prefix, i);
goto error_undo;
case QUEUE_FLIP_DRM_FLUSH_FAILED:
ms_print_pageflip_error(scrn->scrnIndex, log_prefix, i, flags, errno);
goto error_undo;
case QUEUE_FLIP_SUCCESS:
break;
}
}
drmmode_bo_destroy(&ms->drmmode, &new_front_bo);
/*
* Do we have more than our local reference,
* if so and no errors, then drop our local
* reference and return now.
*/
if (flipdata->flip_count > 1) {
flipdata->flip_count--;
return TRUE;
}
error_undo:
/*
* Have we just got the local reference?
* free the framebuffer if so since nobody successfully
* submitted anything
*/
if (flipdata->flip_count == 1) {
drmModeRmFB(ms->fd, ms->drmmode.fb_id);
ms->drmmode.fb_id = flipdata->old_fb_id;
}
error_out:
drmmode_bo_destroy(&ms->drmmode, &new_front_bo);
/* if only the local reference - free the structure,
* else drop the local reference and return */
if (flipdata->flip_count == 1)
free(flipdata);
else
flipdata->flip_count--;
return FALSE;
#endif /* GLAMOR_HAS_GBM */
}
#endif