sdl

libtool.m4 (287073B)

---

 ##############################################################################
 # Based on libtool-2.4.2
 # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
 #
 #   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
 #                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
 #                 Foundation, Inc.
 #   Written by Gordon Matzigkeit, 1996
 #
 # This file is free software; the Free Software Foundation gives
 # unlimited permission to copy and/or distribute it, with or without
 # modifications, as long as this notice is preserved.
 
 m4_define([_LT_COPYING], [dnl
 #   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
 #                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
 #                 Foundation, Inc.
 #   Written by Gordon Matzigkeit, 1996
 #
 #   This file is part of GNU Libtool.
 #
 # GNU Libtool is free software; you can redistribute it and/or
 # modify it under the terms of the GNU General Public License as
 # published by the Free Software Foundation; either version 2 of
 # the License, or (at your option) any later version.
 #
 # As a special exception to the GNU General Public License,
 # if you distribute this file as part of a program or library that
 # is built using GNU Libtool, you may include this file under the
 # same distribution terms that you use for the rest of that program.
 #
 # GNU Libtool is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
 # along with GNU Libtool; see the file COPYING.  If not, a copy
 # can be downloaded from http://www.gnu.org/licenses/gpl.html, or
 # obtained by writing to the Free Software Foundation, Inc.,
 # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 ])
 
 # serial 57 LT_INIT
 
 
 # LT_PREREQ(VERSION)
 # ------------------
 # Complain and exit if this libtool version is less that VERSION.
 m4_defun([LT_PREREQ],
 [m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
        [m4_default([$3],
 		   [m4_fatal([Libtool version $1 or higher is required],
 		             63)])],
        [$2])])
 
 
 # _LT_CHECK_BUILDDIR
 # ------------------
 # Complain if the absolute build directory name contains unusual characters
 m4_defun([_LT_CHECK_BUILDDIR],
 [case `pwd` in
   *\ * | *\	*)
     AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
 esac
 ])
 
 
 # LT_INIT([OPTIONS])
 # ------------------
 AC_DEFUN([LT_INIT],
 [AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
 AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
 AC_BEFORE([$0], [LT_LANG])dnl
 AC_BEFORE([$0], [LT_OUTPUT])dnl
 AC_BEFORE([$0], [LTDL_INIT])dnl
 m4_require([_LT_CHECK_BUILDDIR])dnl
 
 dnl Autoconf doesn't catch unexpanded LT_ macros by default:
 m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
 m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
 dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
 dnl unless we require an AC_DEFUNed macro:
 AC_REQUIRE([LTOPTIONS_VERSION])dnl
 AC_REQUIRE([LTSUGAR_VERSION])dnl
 AC_REQUIRE([LTVERSION_VERSION])dnl
 AC_REQUIRE([LTOBSOLETE_VERSION])dnl
 m4_require([_LT_PROG_LTMAIN])dnl
 
 _LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
 
 dnl Parse OPTIONS
 _LT_SET_OPTIONS([$0], [$1])
 
 # This can be used to rebuild libtool when needed
 LIBTOOL_DEPS="$ltmain"
 
 # Always use our own libtool.
 LIBTOOL='$(SHELL) $(top_builddir)/libtool'
 AC_SUBST(LIBTOOL)dnl
 
 _LT_SETUP
 
 # Only expand once:
 m4_define([LT_INIT])
 ])# LT_INIT
 
 # Old names:
 AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
 AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
 dnl aclocal-1.4 backwards compatibility:
 dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
 dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
 
 
 # _LT_CC_BASENAME(CC)
 # -------------------
 # Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
 m4_defun([_LT_CC_BASENAME],
 [for cc_temp in $1""; do
   case $cc_temp in
     compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
     distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
     \-*) ;;
     *) break;;
   esac
 done
 cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
 ])
 
 
 # _LT_FILEUTILS_DEFAULTS
 # ----------------------
 # It is okay to use these file commands and assume they have been set
 # sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
 m4_defun([_LT_FILEUTILS_DEFAULTS],
 [: ${CP="cp -f"}
 : ${MV="mv -f"}
 : ${RM="rm -f"}
 ])# _LT_FILEUTILS_DEFAULTS
 
 
 # _LT_SETUP
 # ---------
 m4_defun([_LT_SETUP],
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
 AC_REQUIRE([AC_CANONICAL_BUILD])dnl
 AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
 AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
 
 _LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl
 dnl
 _LT_DECL([], [host_alias], [0], [The host system])dnl
 _LT_DECL([], [host], [0])dnl
 _LT_DECL([], [host_os], [0])dnl
 dnl
 _LT_DECL([], [build_alias], [0], [The build system])dnl
 _LT_DECL([], [build], [0])dnl
 _LT_DECL([], [build_os], [0])dnl
 dnl
 AC_REQUIRE([AC_PROG_CC])dnl
 AC_REQUIRE([LT_PATH_LD])dnl
 AC_REQUIRE([LT_PATH_NM])dnl
 dnl
 AC_REQUIRE([AC_PROG_LN_S])dnl
 test -z "$LN_S" && LN_S="ln -s"
 _LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
 dnl
 AC_REQUIRE([LT_CMD_MAX_LEN])dnl
 _LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
 _LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
 dnl
 m4_require([_LT_FILEUTILS_DEFAULTS])dnl
 m4_require([_LT_CHECK_SHELL_FEATURES])dnl
 m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
 m4_require([_LT_CMD_RELOAD])dnl
 m4_require([_LT_CHECK_MAGIC_METHOD])dnl
 m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
 m4_require([_LT_CMD_OLD_ARCHIVE])dnl
 m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
 m4_require([_LT_WITH_SYSROOT])dnl
 
 _LT_CONFIG_LIBTOOL_INIT([
 # See if we are running on zsh, and set the options which allow our
 # commands through without removal of \ escapes INIT.
 if test -n "\${ZSH_VERSION+set}" ; then
    setopt NO_GLOB_SUBST
 fi
 ])
 if test -n "${ZSH_VERSION+set}" ; then
    setopt NO_GLOB_SUBST
 fi
 
 _LT_CHECK_OBJDIR
 
 m4_require([_LT_TAG_COMPILER])dnl
 
 case $host_os in
 aix3*)
   # AIX sometimes has problems with the GCC collect2 program.  For some
   # reason, if we set the COLLECT_NAMES environment variable, the problems
   # vanish in a puff of smoke.
   if test "X${COLLECT_NAMES+set}" != Xset; then
     COLLECT_NAMES=
     export COLLECT_NAMES
   fi
   ;;
 esac
 
 # Global variables:
 ofile=libtool
 can_build_shared=yes
 
 # All known linkers require a `.a' archive for static linking (except MSVC,
 # which needs '.lib').
 libext=a
 
 with_gnu_ld="$lt_cv_prog_gnu_ld"
 
 old_CC="$CC"
 old_CFLAGS="$CFLAGS"
 
 # Set sane defaults for various variables
 test -z "$CC" && CC=cc
 test -z "$LTCC" && LTCC=$CC
 test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
 test -z "$LD" && LD=ld
 test -z "$ac_objext" && ac_objext=o
 
 _LT_CC_BASENAME([$compiler])
 
 # Only perform the check for file, if the check method requires it
 test -z "$MAGIC_CMD" && MAGIC_CMD=file
 case $deplibs_check_method in
 file_magic*)
   if test "$file_magic_cmd" = '$MAGIC_CMD'; then
     _LT_PATH_MAGIC
   fi
   ;;
 esac
 
 # Use C for the default configuration in the libtool script
 LT_SUPPORTED_TAG([CC])
 _LT_LANG_C_CONFIG
 _LT_LANG_DEFAULT_CONFIG
 _LT_CONFIG_COMMANDS
 ])# _LT_SETUP
 
 
 # _LT_PREPARE_SED_QUOTE_VARS
 # --------------------------
 # Define a few sed substitution that help us do robust quoting.
 m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
 [# Backslashify metacharacters that are still active within
 # double-quoted strings.
 sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
 
 # Same as above, but do not quote variable references.
 double_quote_subst='s/\([["`\\]]\)/\\\1/g'
 
 # Sed substitution to delay expansion of an escaped shell variable in a
 # double_quote_subst'ed string.
 delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
 
 # Sed substitution to delay expansion of an escaped single quote.
 delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
 
 # Sed substitution to avoid accidental globbing in evaled expressions
 no_glob_subst='s/\*/\\\*/g'
 ])
 
 # _LT_PROG_LTMAIN
 # ---------------
 # Note that this code is called both from `configure', and `config.status'
 # now that we use AC_CONFIG_COMMANDS to generate libtool.  Notably,
 # `config.status' has no value for ac_aux_dir unless we are using Automake,
 # so we pass a copy along to make sure it has a sensible value anyway.
 m4_defun([_LT_PROG_LTMAIN],
 [m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
 _LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
 ltmain="$ac_aux_dir/ltmain.sh"
 ])# _LT_PROG_LTMAIN
 
 
 ## ------------------------------------- ##
 ## Accumulate code for creating libtool. ##
 ## ------------------------------------- ##
 
 # So that we can recreate a full libtool script including additional
 # tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
 # in macros and then make a single call at the end using the `libtool'
 # label.
 
 
 # _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
 # ----------------------------------------
 # Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
 m4_define([_LT_CONFIG_LIBTOOL_INIT],
 [m4_ifval([$1],
           [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
                      [$1
 ])])])
 
 # Initialize.
 m4_define([_LT_OUTPUT_LIBTOOL_INIT])
 
 
 # _LT_CONFIG_LIBTOOL([COMMANDS])
 # ------------------------------
 # Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
 m4_define([_LT_CONFIG_LIBTOOL],
 [m4_ifval([$1],
           [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
                      [$1
 ])])])
 
 # Initialize.
 m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
 
 
 # _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
 # -----------------------------------------------------
 m4_defun([_LT_CONFIG_SAVE_COMMANDS],
 [_LT_CONFIG_LIBTOOL([$1])
 _LT_CONFIG_LIBTOOL_INIT([$2])
 ])
 
 
 # _LT_FORMAT_COMMENT([COMMENT])
 # -----------------------------
 # Add leading comment marks to the start of each line, and a trailing
 # full-stop to the whole comment if one is not present already.
 m4_define([_LT_FORMAT_COMMENT],
 [m4_ifval([$1], [
 m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
               [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
 )])
 
 
 
 ## ------------------------ ##
 ## FIXME: Eliminate VARNAME ##
 ## ------------------------ ##
 
 
 # _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
 # -------------------------------------------------------------------
 # CONFIGNAME is the name given to the value in the libtool script.
 # VARNAME is the (base) name used in the configure script.
 # VALUE may be 0, 1 or 2 for a computed quote escaped value based on
 # VARNAME.  Any other value will be used directly.
 m4_define([_LT_DECL],
 [lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
     [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
 	[m4_ifval([$1], [$1], [$2])])
     lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
     m4_ifval([$4],
 	[lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
     lt_dict_add_subkey([lt_decl_dict], [$2],
 	[tagged?], [m4_ifval([$5], [yes], [no])])])
 ])
 
 
 # _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
 # --------------------------------------------------------
 m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
 
 
 # lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
 # ------------------------------------------------
 m4_define([lt_decl_tag_varnames],
 [_lt_decl_filter([tagged?], [yes], $@)])
 
 
 # _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
 # ---------------------------------------------------------
 m4_define([_lt_decl_filter],
 [m4_case([$#],
   [0], [m4_fatal([$0: too few arguments: $#])],
   [1], [m4_fatal([$0: too few arguments: $#: $1])],
   [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
   [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
   [lt_dict_filter([lt_decl_dict], $@)])[]dnl
 ])
 
 
 # lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
 # --------------------------------------------------
 m4_define([lt_decl_quote_varnames],
 [_lt_decl_filter([value], [1], $@)])
 
 
 # lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
 # ---------------------------------------------------
 m4_define([lt_decl_dquote_varnames],
 [_lt_decl_filter([value], [2], $@)])
 
 
 # lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
 # ---------------------------------------------------
 m4_define([lt_decl_varnames_tagged],
 [m4_assert([$# <= 2])dnl
 _$0(m4_quote(m4_default([$1], [[, ]])),
     m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
     m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
 m4_define([_lt_decl_varnames_tagged],
 [m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
 
 
 # lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
 # ------------------------------------------------
 m4_define([lt_decl_all_varnames],
 [_$0(m4_quote(m4_default([$1], [[, ]])),
      m4_if([$2], [],
 	   m4_quote(lt_decl_varnames),
 	m4_quote(m4_shift($@))))[]dnl
 ])
 m4_define([_lt_decl_all_varnames],
 [lt_join($@, lt_decl_varnames_tagged([$1],
 			lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
 ])
 
 
 # _LT_CONFIG_STATUS_DECLARE([VARNAME])
 # ------------------------------------
 # Quote a variable value, and forward it to `config.status' so that its
 # declaration there will have the same value as in `configure'.  VARNAME
 # must have a single quote delimited value for this to work.
 m4_define([_LT_CONFIG_STATUS_DECLARE],
 [$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
 
 
 # _LT_CONFIG_STATUS_DECLARATIONS
 # ------------------------------
 # We delimit libtool config variables with single quotes, so when
 # we write them to config.status, we have to be sure to quote all
 # embedded single quotes properly.  In configure, this macro expands
 # each variable declared with _LT_DECL (and _LT_TAGDECL) into:
 #
 #    <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
 m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
 [m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
     [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
 
 
 # _LT_LIBTOOL_TAGS
 # ----------------
 # Output comment and list of tags supported by the script
 m4_defun([_LT_LIBTOOL_TAGS],
 [_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
 available_tags="_LT_TAGS"dnl
 ])
 
 
 # _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
 # -----------------------------------
 # Extract the dictionary values for VARNAME (optionally with TAG) and
 # expand to a commented shell variable setting:
 #
 #    # Some comment about what VAR is for.
 #    visible_name=$lt_internal_name
 m4_define([_LT_LIBTOOL_DECLARE],
 [_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
 					   [description])))[]dnl
 m4_pushdef([_libtool_name],
     m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
 m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
     [0], [_libtool_name=[$]$1],
     [1], [_libtool_name=$lt_[]$1],
     [2], [_libtool_name=$lt_[]$1],
     [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
 m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
 ])
 
 
 # _LT_LIBTOOL_CONFIG_VARS
 # -----------------------
 # Produce commented declarations of non-tagged libtool config variables
 # suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
 # script.  Tagged libtool config variables (even for the LIBTOOL CONFIG
 # section) are produced by _LT_LIBTOOL_TAG_VARS.
 m4_defun([_LT_LIBTOOL_CONFIG_VARS],
 [m4_foreach([_lt_var],
     m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
     [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
 
 
 # _LT_LIBTOOL_TAG_VARS(TAG)
 # -------------------------
 m4_define([_LT_LIBTOOL_TAG_VARS],
 [m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
     [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
 
 
 # _LT_TAGVAR(VARNAME, [TAGNAME])
 # ------------------------------
 m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
 
 
 # _LT_CONFIG_COMMANDS
 # -------------------
 # Send accumulated output to $CONFIG_STATUS.  Thanks to the lists of
 # variables for single and double quote escaping we saved from calls
 # to _LT_DECL, we can put quote escaped variables declarations
 # into `config.status', and then the shell code to quote escape them in
 # for loops in `config.status'.  Finally, any additional code accumulated
 # from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
 m4_defun([_LT_CONFIG_COMMANDS],
 [AC_PROVIDE_IFELSE([LT_OUTPUT],
 	dnl If the libtool generation code has been placed in $CONFIG_LT,
 	dnl instead of duplicating it all over again into config.status,
 	dnl then we will have config.status run $CONFIG_LT later, so it
 	dnl needs to know what name is stored there:
         [AC_CONFIG_COMMANDS([libtool],
             [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
     dnl If the libtool generation code is destined for config.status,
     dnl expand the accumulated commands and init code now:
     [AC_CONFIG_COMMANDS([libtool],
         [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
 ])#_LT_CONFIG_COMMANDS
 
 
 # Initialize.
 m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
 [
 
 # The HP-UX ksh and POSIX shell print the target directory to stdout
 # if CDPATH is set.
 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
 sed_quote_subst='$sed_quote_subst'
 double_quote_subst='$double_quote_subst'
 delay_variable_subst='$delay_variable_subst'
 _LT_CONFIG_STATUS_DECLARATIONS
 LTCC='$LTCC'
 LTCFLAGS='$LTCFLAGS'
 compiler='$compiler_DEFAULT'
 
 # A function that is used when there is no print builtin or printf.
 func_fallback_echo ()
 {
   eval 'cat <<_LTECHO_EOF
 \$[]1
 _LTECHO_EOF'
 }
 
 # Quote evaled strings.
 for var in lt_decl_all_varnames([[ \
 ]], lt_decl_quote_varnames); do
     case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
     *[[\\\\\\\`\\"\\\$]]*)
       eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
       ;;
     *)
       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
       ;;
     esac
 done
 
 # Double-quote double-evaled strings.
 for var in lt_decl_all_varnames([[ \
 ]], lt_decl_dquote_varnames); do
     case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
     *[[\\\\\\\`\\"\\\$]]*)
       eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
       ;;
     *)
       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
       ;;
     esac
 done
 
 _LT_OUTPUT_LIBTOOL_INIT
 ])
 
 # _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
 # ------------------------------------
 # Generate a child script FILE with all initialization necessary to
 # reuse the environment learned by the parent script, and make the
 # file executable.  If COMMENT is supplied, it is inserted after the
 # `#!' sequence but before initialization text begins.  After this
 # macro, additional text can be appended to FILE to form the body of
 # the child script.  The macro ends with non-zero status if the
 # file could not be fully written (such as if the disk is full).
 m4_ifdef([AS_INIT_GENERATED],
 [m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
 [m4_defun([_LT_GENERATED_FILE_INIT],
 [m4_require([AS_PREPARE])]dnl
 [m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
 [lt_write_fail=0
 cat >$1 <<_ASEOF || lt_write_fail=1
 #! $SHELL
 # Generated by $as_me.
 $2
 SHELL=\${CONFIG_SHELL-$SHELL}
 export SHELL
 _ASEOF
 cat >>$1 <<\_ASEOF || lt_write_fail=1
 AS_SHELL_SANITIZE
 _AS_PREPARE
 exec AS_MESSAGE_FD>&1
 _ASEOF
 test $lt_write_fail = 0 && chmod +x $1[]dnl
 m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
 
 # LT_OUTPUT
 # ---------
 # This macro allows early generation of the libtool script (before
 # AC_OUTPUT is called), incase it is used in configure for compilation
 # tests.
 AC_DEFUN([LT_OUTPUT],
 [: ${CONFIG_LT=./config.lt}
 AC_MSG_NOTICE([creating $CONFIG_LT])
 _LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
 [# Run this file to recreate a libtool stub with the current configuration.])
 
 cat >>"$CONFIG_LT" <<\_LTEOF
 lt_cl_silent=false
 exec AS_MESSAGE_LOG_FD>>config.log
 {
   echo
   AS_BOX([Running $as_me.])
 } >&AS_MESSAGE_LOG_FD
 
 lt_cl_help="\
 \`$as_me' creates a local libtool stub from the current configuration,
 for use in further configure time tests before the real libtool is
 generated.
 
 Usage: $[0] [[OPTIONS]]
 
   -h, --help      print this help, then exit
   -V, --version   print version number, then exit
   -q, --quiet     do not print progress messages
   -d, --debug     don't remove temporary files
 
 Report bugs to <bug-libtool@gnu.org>."
 
 lt_cl_version="\
 m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
 m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
 configured by $[0], generated by m4_PACKAGE_STRING.
 
 Copyright (C) 2011 Free Software Foundation, Inc.
 This config.lt script is free software; the Free Software Foundation
 gives unlimited permision to copy, distribute and modify it."
 
 while test $[#] != 0
 do
   case $[1] in
     --version | --v* | -V )
       echo "$lt_cl_version"; exit 0 ;;
     --help | --h* | -h )
       echo "$lt_cl_help"; exit 0 ;;
     --debug | --d* | -d )
       debug=: ;;
     --quiet | --q* | --silent | --s* | -q )
       lt_cl_silent=: ;;
 
     -*) AC_MSG_ERROR([unrecognized option: $[1]
 Try \`$[0] --help' for more information.]) ;;
 
     *) AC_MSG_ERROR([unrecognized argument: $[1]
 Try \`$[0] --help' for more information.]) ;;
   esac
   shift
 done
 
 if $lt_cl_silent; then
   exec AS_MESSAGE_FD>/dev/null
 fi
 _LTEOF
 
 cat >>"$CONFIG_LT" <<_LTEOF
 _LT_OUTPUT_LIBTOOL_COMMANDS_INIT
 _LTEOF
 
 cat >>"$CONFIG_LT" <<\_LTEOF
 AC_MSG_NOTICE([creating $ofile])
 _LT_OUTPUT_LIBTOOL_COMMANDS
 AS_EXIT(0)
 _LTEOF
 chmod +x "$CONFIG_LT"
 
 # configure is writing to config.log, but config.lt does its own redirection,
 # appending to config.log, which fails on DOS, as config.log is still kept
 # open by configure.  Here we exec the FD to /dev/null, effectively closing
 # config.log, so it can be properly (re)opened and appended to by config.lt.
 lt_cl_success=:
 test "$silent" = yes &&
   lt_config_lt_args="$lt_config_lt_args --quiet"
 exec AS_MESSAGE_LOG_FD>/dev/null
 $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
 exec AS_MESSAGE_LOG_FD>>config.log
 $lt_cl_success || AS_EXIT(1)
 ])# LT_OUTPUT
 
 
 # _LT_CONFIG(TAG)
 # ---------------
 # If TAG is the built-in tag, create an initial libtool script with a
 # default configuration from the untagged config vars.  Otherwise add code
 # to config.status for appending the configuration named by TAG from the
 # matching tagged config vars.
 m4_defun([_LT_CONFIG],
 [m4_require([_LT_FILEUTILS_DEFAULTS])dnl
 _LT_CONFIG_SAVE_COMMANDS([
   m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
   m4_if(_LT_TAG, [C], [
     # See if we are running on zsh, and set the options which allow our
     # commands through without removal of \ escapes.
     if test -n "${ZSH_VERSION+set}" ; then
       setopt NO_GLOB_SUBST
     fi
 
     cfgfile="${ofile}T"
     trap "$RM \"$cfgfile\"; exit 1" 1 2 15
     $RM "$cfgfile"
 
     cat <<_LT_EOF >> "$cfgfile"
 #! $SHELL
 
 # `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
 # Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
 # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
 # NOTE: Changes made to this file will be lost: look at ltmain.sh.
 #
 _LT_COPYING
 _LT_LIBTOOL_TAGS
 
 # ### BEGIN LIBTOOL CONFIG
 _LT_LIBTOOL_CONFIG_VARS
 _LT_LIBTOOL_TAG_VARS
 # ### END LIBTOOL CONFIG
 
 _LT_EOF
 
   case $host_os in
   aix3*)
     cat <<\_LT_EOF >> "$cfgfile"
 # AIX sometimes has problems with the GCC collect2 program.  For some
 # reason, if we set the COLLECT_NAMES environment variable, the problems
 # vanish in a puff of smoke.
 if test "X${COLLECT_NAMES+set}" != Xset; then
   COLLECT_NAMES=
   export COLLECT_NAMES
 fi
 _LT_EOF
     ;;
   esac
 
   _LT_PROG_LTMAIN
 
   # We use sed instead of cat because bash on DJGPP gets confused if
   # if finds mixed CR/LF and LF-only lines.  Since sed operates in
   # text mode, it properly converts lines to CR/LF.  This bash problem
   # is reportedly fixed, but why not run on old versions too?
   sed '$q' "$ltmain" >> "$cfgfile" \
      || (rm -f "$cfgfile"; exit 1)
 
   _LT_PROG_REPLACE_SHELLFNS
 
    mv -f "$cfgfile" "$ofile" ||
     (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
   chmod +x "$ofile"
 ],
 [cat <<_LT_EOF >> "$ofile"
 
 dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
 dnl in a comment (ie after a #).
 # ### BEGIN LIBTOOL TAG CONFIG: $1
 _LT_LIBTOOL_TAG_VARS(_LT_TAG)
 # ### END LIBTOOL TAG CONFIG: $1
 _LT_EOF
 ])dnl /m4_if
 ],
 [m4_if([$1], [], [
     PACKAGE='$PACKAGE'
     VERSION='$VERSION'
     TIMESTAMP='$TIMESTAMP'
     RM='$RM'
     ofile='$ofile'], [])
 ])dnl /_LT_CONFIG_SAVE_COMMANDS
 ])# _LT_CONFIG
 
 
 # LT_SUPPORTED_TAG(TAG)
 # ---------------------
 # Trace this macro to discover what tags are supported by the libtool
 # --tag option, using:
 #    autoconf --trace 'LT_SUPPORTED_TAG:$1'
 AC_DEFUN([LT_SUPPORTED_TAG], [])
 
 
 # C support is built-in for now
 m4_define([_LT_LANG_C_enabled], [])
 m4_define([_LT_TAGS], [])
 
 
 # LT_LANG(LANG)
 # -------------
 # Enable libtool support for the given language if not already enabled.
 AC_DEFUN([LT_LANG],
 [AC_BEFORE([$0], [LT_OUTPUT])dnl
 m4_case([$1],
   [C],			[_LT_LANG(C)],
   [C++],		[_LT_LANG(CXX)],
   [Go],			[_LT_LANG(GO)],
   [Java],		[_LT_LANG(GCJ)],
   [Fortran 77],		[_LT_LANG(F77)],
   [Fortran],		[_LT_LANG(FC)],
   [Windows Resource],	[_LT_LANG(RC)],
   [m4_ifdef([_LT_LANG_]$1[_CONFIG],
     [_LT_LANG($1)],
     [m4_fatal([$0: unsupported language: "$1"])])])dnl
 ])# LT_LANG
 
 
 # _LT_LANG(LANGNAME)
 # ------------------
 m4_defun([_LT_LANG],
 [m4_ifdef([_LT_LANG_]$1[_enabled], [],
   [LT_SUPPORTED_TAG([$1])dnl
   m4_append([_LT_TAGS], [$1 ])dnl
   m4_define([_LT_LANG_]$1[_enabled], [])dnl
   _LT_LANG_$1_CONFIG($1)])dnl
 ])# _LT_LANG
 
 
 m4_ifndef([AC_PROG_GO], [
 ############################################################
 # NOTE: This macro has been submitted for inclusion into   #
 #  GNU Autoconf as AC_PROG_GO.  When it is available in    #
 #  a released version of Autoconf we should remove this    #
 #  macro and use it instead.                               #
 ############################################################
 m4_defun([AC_PROG_GO],
 [AC_LANG_PUSH(Go)dnl
 AC_ARG_VAR([GOC],     [Go compiler command])dnl
 AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl
 _AC_ARG_VAR_LDFLAGS()dnl
 AC_CHECK_TOOL(GOC, gccgo)
 if test -z "$GOC"; then
   if test -n "$ac_tool_prefix"; then
     AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo])
   fi
 fi
 if test -z "$GOC"; then
   AC_CHECK_PROG(GOC, gccgo, gccgo, false)
 fi
 ])#m4_defun
 ])#m4_ifndef
 
 
 # _LT_LANG_DEFAULT_CONFIG
 # -----------------------
 m4_defun([_LT_LANG_DEFAULT_CONFIG],
 [AC_PROVIDE_IFELSE([AC_PROG_CXX],
   [LT_LANG(CXX)],
   [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
 
 AC_PROVIDE_IFELSE([AC_PROG_F77],
   [LT_LANG(F77)],
   [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
 
 AC_PROVIDE_IFELSE([AC_PROG_FC],
   [LT_LANG(FC)],
   [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
 
 dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
 dnl pulling things in needlessly.
 AC_PROVIDE_IFELSE([AC_PROG_GCJ],
   [LT_LANG(GCJ)],
   [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
     [LT_LANG(GCJ)],
     [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
       [LT_LANG(GCJ)],
       [m4_ifdef([AC_PROG_GCJ],
 	[m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
        m4_ifdef([A][M_PROG_GCJ],
 	[m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
        m4_ifdef([LT_PROG_GCJ],
 	[m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
 
 AC_PROVIDE_IFELSE([AC_PROG_GO],
   [LT_LANG(GO)],
   [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])])
 
 AC_PROVIDE_IFELSE([LT_PROG_RC],
   [LT_LANG(RC)],
   [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
 ])# _LT_LANG_DEFAULT_CONFIG
 
 # Obsolete macros:
 AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
 AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
 AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
 AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
 AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
 dnl aclocal-1.4 backwards compatibility:
 dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
 dnl AC_DEFUN([AC_LIBTOOL_F77], [])
 dnl AC_DEFUN([AC_LIBTOOL_FC], [])
 dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
 dnl AC_DEFUN([AC_LIBTOOL_RC], [])
 
 
 # _LT_TAG_COMPILER
 # ----------------
 m4_defun([_LT_TAG_COMPILER],
 [AC_REQUIRE([AC_PROG_CC])dnl
 
 _LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
 _LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
 _LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
 _LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
 
 # If no C compiler was specified, use CC.
 LTCC=${LTCC-"$CC"}
 
 # If no C compiler flags were specified, use CFLAGS.
 LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
 
 # Allow CC to be a program name with arguments.
 compiler=$CC
 ])# _LT_TAG_COMPILER
 
 
 # _LT_COMPILER_BOILERPLATE
 # ------------------------
 # Check for compiler boilerplate output or warnings with
 # the simple compiler test code.
 m4_defun([_LT_COMPILER_BOILERPLATE],
 [m4_require([_LT_DECL_SED])dnl
 ac_outfile=conftest.$ac_objext
 echo "$lt_simple_compile_test_code" >conftest.$ac_ext
 eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 _lt_compiler_boilerplate=`cat conftest.err`
 $RM conftest*
 ])# _LT_COMPILER_BOILERPLATE
 
 
 # _LT_LINKER_BOILERPLATE
 # ----------------------
 # Check for linker boilerplate output or warnings with
 # the simple link test code.
 m4_defun([_LT_LINKER_BOILERPLATE],
 [m4_require([_LT_DECL_SED])dnl
 ac_outfile=conftest.$ac_objext
 echo "$lt_simple_link_test_code" >conftest.$ac_ext
 eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 _lt_linker_boilerplate=`cat conftest.err`
 $RM -r conftest*
 ])# _LT_LINKER_BOILERPLATE
 
 # _LT_REQUIRED_DARWIN_CHECKS
 # -------------------------
 m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
   case $host_os in
     rhapsody* | darwin*)
     AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
     AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
     AC_CHECK_TOOL([LIPO], [lipo], [:])
     AC_CHECK_TOOL([OTOOL], [otool], [:])
     AC_CHECK_TOOL([OTOOL64], [otool64], [:])
     _LT_DECL([], [DSYMUTIL], [1],
       [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
     _LT_DECL([], [NMEDIT], [1],
       [Tool to change global to local symbols on Mac OS X])
     _LT_DECL([], [LIPO], [1],
       [Tool to manipulate fat objects and archives on Mac OS X])
     _LT_DECL([], [OTOOL], [1],
       [ldd/readelf like tool for Mach-O binaries on Mac OS X])
     _LT_DECL([], [OTOOL64], [1],
       [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
 
     AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
       [lt_cv_apple_cc_single_mod=no
       if test -z "${LT_MULTI_MODULE}"; then
 	# By default we will add the -single_module flag. You can override
 	# by either setting the environment variable LT_MULTI_MODULE
 	# non-empty at configure time, or by adding -multi_module to the
 	# link flags.
 	rm -rf libconftest.dylib*
 	echo "int foo(void){return 1;}" > conftest.c
 	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
 -dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
 	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
 	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
         _lt_result=$?
 	# If there is a non-empty error log, and "single_module"
 	# appears in it, assume the flag caused a linker warning
         if test -s conftest.err && $GREP single_module conftest.err; then
 	  cat conftest.err >&AS_MESSAGE_LOG_FD
 	# Otherwise, if the output was created with a 0 exit code from
 	# the compiler, it worked.
 	elif test -f libconftest.dylib && test $_lt_result -eq 0; then
 	  lt_cv_apple_cc_single_mod=yes
 	else
 	  cat conftest.err >&AS_MESSAGE_LOG_FD
 	fi
 	rm -rf libconftest.dylib*
 	rm -f conftest.*
       fi])
 
     AC_CACHE_CHECK([for -exported_symbols_list linker flag],
       [lt_cv_ld_exported_symbols_list],
       [lt_cv_ld_exported_symbols_list=no
       save_LDFLAGS=$LDFLAGS
       echo "_main" > conftest.sym
       LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
       AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
 	[lt_cv_ld_exported_symbols_list=yes],
 	[lt_cv_ld_exported_symbols_list=no])
 	LDFLAGS="$save_LDFLAGS"
     ])
 
     AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
       [lt_cv_ld_force_load=no
       cat > conftest.c << _LT_EOF
 int forced_loaded() { return 2;}
 _LT_EOF
       echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
       $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
       echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
       $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
       echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
       $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
       cat > conftest.c << _LT_EOF
 int main() { return 0;}
 _LT_EOF
       echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
       $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
       _lt_result=$?
       if test -s conftest.err && $GREP force_load conftest.err; then
 	cat conftest.err >&AS_MESSAGE_LOG_FD
       elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
 	lt_cv_ld_force_load=yes
       else
 	cat conftest.err >&AS_MESSAGE_LOG_FD
       fi
         rm -f conftest.err libconftest.a conftest conftest.c
         rm -rf conftest.dSYM
     ])
     case $host_os in
     rhapsody* | darwin1.[[012]])
       _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
     darwin1.*)
       _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
     darwin*) # darwin 5.x on
       # if running on 10.5 or later, the deployment target defaults
       # to the OS version, if on x86, and 10.4, the deployment
       # target defaults to 10.4. Don't you love it?
       case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
 	10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
 	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
 	10.[[012]]*)
 	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
 	10.*)
 	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
       esac
     ;;
   esac
     if test "$lt_cv_apple_cc_single_mod" = "yes"; then
       _lt_dar_single_mod='$single_module'
     fi
     if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
       _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
     else
       _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
     fi
     if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
       _lt_dsymutil='~$DSYMUTIL $lib || :'
     else
       _lt_dsymutil=
     fi
     ;;
   esac
 ])
 
 
 # _LT_DARWIN_LINKER_FEATURES([TAG])
 # ---------------------------------
 # Checks for linker and compiler features on darwin
 m4_defun([_LT_DARWIN_LINKER_FEATURES],
 [
   m4_require([_LT_REQUIRED_DARWIN_CHECKS])
   _LT_TAGVAR(archive_cmds_need_lc, $1)=no
   _LT_TAGVAR(hardcode_direct, $1)=no
   _LT_TAGVAR(hardcode_automatic, $1)=yes
   _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
   if test "$lt_cv_ld_force_load" = "yes"; then
     _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
     m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
                   [FC],  [_LT_TAGVAR(compiler_needs_object, $1)=yes])
   else
     _LT_TAGVAR(whole_archive_flag_spec, $1)=''
   fi
   _LT_TAGVAR(link_all_deplibs, $1)=yes
   _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
   case $cc_basename in
      ifort*) _lt_dar_can_shared=yes ;;
      *) _lt_dar_can_shared=$GCC ;;
   esac
   if test "$_lt_dar_can_shared" = "yes"; then
     output_verbose_link_cmd=func_echo_all
     _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
     _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
     _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
     _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
     m4_if([$1], [CXX],
 [   if test "$lt_cv_apple_cc_single_mod" != "yes"; then
       _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
       _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
     fi
 ],[])
   else
   _LT_TAGVAR(ld_shlibs, $1)=no
   fi
 ])
 
 # _LT_SYS_MODULE_PATH_AIX([TAGNAME])
 # ----------------------------------
 # Links a minimal program and checks the executable
 # for the system default hardcoded library path. In most cases,
 # this is /usr/lib:/lib, but when the MPI compilers are used
 # the location of the communication and MPI libs are included too.
 # If we don't find anything, use the default library path according
 # to the aix ld manual.
 # Store the results from the different compilers for each TAGNAME.
 # Allow to override them for all tags through lt_cv_aix_libpath.
 m4_defun([_LT_SYS_MODULE_PATH_AIX],
 [m4_require([_LT_DECL_SED])dnl
 if test "${lt_cv_aix_libpath+set}" = set; then
   aix_libpath=$lt_cv_aix_libpath
 else
   AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
   [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
   lt_aix_libpath_sed='[
       /Import File Strings/,/^$/ {
 	  /^0/ {
 	      s/^0  *\([^ ]*\) *$/\1/
 	      p
 	  }
       }]'
   _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
   # Check for a 64-bit object if we didn't find anything.
   if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
     _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
   fi],[])
   if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
     _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
   fi
   ])
   aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
 fi
 ])# _LT_SYS_MODULE_PATH_AIX
 
 
 # _LT_SHELL_INIT(ARG)
 # -------------------
 m4_define([_LT_SHELL_INIT],
 [m4_divert_text([M4SH-INIT], [$1
 ])])# _LT_SHELL_INIT
 
 
 
 # _LT_PROG_ECHO_BACKSLASH
 # -----------------------
 # Find how we can fake an echo command that does not interpret backslash.
 # In particular, with Autoconf 2.60 or later we add some code to the start
 # of the generated configure script which will find a shell with a builtin
 # printf (which we can use as an echo command).
 m4_defun([_LT_PROG_ECHO_BACKSLASH],
 [ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
 ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
 ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
 
 AC_MSG_CHECKING([how to print strings])
 # Test print first, because it will be a builtin if present.
 if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
    test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
   ECHO='print -r --'
 elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
   ECHO='printf %s\n'
 else
   # Use this function as a fallback that always works.
   func_fallback_echo ()
   {
     eval 'cat <<_LTECHO_EOF
 $[]1
 _LTECHO_EOF'
   }
   ECHO='func_fallback_echo'
 fi
 
 # func_echo_all arg...
 # Invoke $ECHO with all args, space-separated.
 func_echo_all ()
 {
     $ECHO "$*" 
 }
 
 case "$ECHO" in
   printf*) AC_MSG_RESULT([printf]) ;;
   print*) AC_MSG_RESULT([print -r]) ;;
   *) AC_MSG_RESULT([cat]) ;;
 esac
 
 m4_ifdef([_AS_DETECT_SUGGESTED],
 [_AS_DETECT_SUGGESTED([
   test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
     ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
     ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
     ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
     PATH=/empty FPATH=/empty; export PATH FPATH
     test "X`printf %s $ECHO`" = "X$ECHO" \
       || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
 
 _LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
 _LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
 ])# _LT_PROG_ECHO_BACKSLASH
 
 
 # _LT_WITH_SYSROOT
 # ----------------
 AC_DEFUN([_LT_WITH_SYSROOT],
 [AC_MSG_CHECKING([for sysroot])
 AC_ARG_WITH([sysroot],
 [  --with-sysroot[=DIR] Search for dependent libraries within DIR
                         (or the compiler's sysroot if not specified).],
 [], [with_sysroot=no])
 
 dnl lt_sysroot will always be passed unquoted.  We quote it here
 dnl in case the user passed a directory name.
 lt_sysroot=
 case ${with_sysroot} in #(
  yes)
    if test "$GCC" = yes; then
      lt_sysroot=`$CC --print-sysroot 2>/dev/null`
    fi
    ;; #(
  /*)
    lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
    ;; #(
  no|'')
    ;; #(
  *)
    AC_MSG_RESULT([${with_sysroot}])
    AC_MSG_ERROR([The sysroot must be an absolute path.])
    ;;
 esac
 
  AC_MSG_RESULT([${lt_sysroot:-no}])
 _LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
 [dependent libraries, and in which our libraries should be installed.])])
 
 # _LT_ENABLE_LOCK
 # ---------------
 m4_defun([_LT_ENABLE_LOCK],
 [AC_ARG_ENABLE([libtool-lock],
   [AS_HELP_STRING([--disable-libtool-lock],
     [avoid locking (might break parallel builds)])])
 test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
 
 # Some flags need to be propagated to the compiler or linker for good
 # libtool support.
 case $host in
 ia64-*-hpux*)
   # Find out which ABI we are using.
   echo 'int i;' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
     case `/usr/bin/file conftest.$ac_objext` in
       *ELF-32*)
 	HPUX_IA64_MODE="32"
 	;;
       *ELF-64*)
 	HPUX_IA64_MODE="64"
 	;;
     esac
   fi
   rm -rf conftest*
   ;;
 *-*-irix6*)
   # Find out which ABI we are using.
   echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
     if test "$lt_cv_prog_gnu_ld" = yes; then
       case `/usr/bin/file conftest.$ac_objext` in
 	*32-bit*)
 	  LD="${LD-ld} -melf32bsmip"
 	  ;;
 	*N32*)
 	  LD="${LD-ld} -melf32bmipn32"
 	  ;;
 	*64-bit*)
 	  LD="${LD-ld} -melf64bmip"
 	;;
       esac
     else
       case `/usr/bin/file conftest.$ac_objext` in
 	*32-bit*)
 	  LD="${LD-ld} -32"
 	  ;;
 	*N32*)
 	  LD="${LD-ld} -n32"
 	  ;;
 	*64-bit*)
 	  LD="${LD-ld} -64"
 	  ;;
       esac
     fi
   fi
   rm -rf conftest*
   ;;
 
 x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
 s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
   # Find out which ABI we are using.
   echo 'int i;' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
     case `/usr/bin/file conftest.o` in
       *32-bit*)
 	case $host in
 	  x86_64-*kfreebsd*-gnu)
 	    LD="${LD-ld} -m elf_i386_fbsd"
 	    ;;
 	  x86_64-*linux*)
 	    LD="${LD-ld} -m elf_i386"
 	    ;;
 	  ppc64-*linux*|powerpc64-*linux*)
 	    LD="${LD-ld} -m elf32ppclinux"
 	    ;;
 	  s390x-*linux*)
 	    LD="${LD-ld} -m elf_s390"
 	    ;;
 	  sparc64-*linux*)
 	    LD="${LD-ld} -m elf32_sparc"
 	    ;;
 	esac
 	;;
       *64-bit*)
 	case $host in
 	  x86_64-*kfreebsd*-gnu)
 	    LD="${LD-ld} -m elf_x86_64_fbsd"
 	    ;;
 	  x86_64-*linux*)
 	    LD="${LD-ld} -m elf_x86_64"
 	    ;;
 	  powerpc64le-*linux*)
 	    LD="${LD-ld} -m elf64lppc"
 	    ;;
 	  powerpc64-*linux*)
 	    LD="${LD-ld} -m elf64ppc"
 	    ;;
 	  s390*-*linux*|s390*-*tpf*)
 	    LD="${LD-ld} -m elf64_s390"
 	    ;;
 	  sparc*-*linux*)
 	    LD="${LD-ld} -m elf64_sparc"
 	    ;;
 	esac
 	;;
     esac
   fi
   rm -rf conftest*
   ;;
 
 *-*-sco3.2v5*)
   # On SCO OpenServer 5, we need -belf to get full-featured binaries.
   SAVE_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -belf"
   AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
     [AC_LANG_PUSH(C)
      AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
      AC_LANG_POP])
   if test x"$lt_cv_cc_needs_belf" != x"yes"; then
     # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
     CFLAGS="$SAVE_CFLAGS"
   fi
   ;;
 *-*solaris*)
   # Find out which ABI we are using.
   echo 'int i;' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
     case `/usr/bin/file conftest.o` in
     *64-bit*)
       case $lt_cv_prog_gnu_ld in
       yes*)
         case $host in
         i?86-*-solaris*)
           LD="${LD-ld} -m elf_x86_64"
           ;;
         sparc*-*-solaris*)
           LD="${LD-ld} -m elf64_sparc"
           ;;
         esac
         # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
         if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
           LD="${LD-ld}_sol2"
         fi
         ;;
       *)
 	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
 	  LD="${LD-ld} -64"
 	fi
 	;;
       esac
       ;;
     esac
   fi
   rm -rf conftest*
   ;;
 esac
 
 need_locks="$enable_libtool_lock"
 ])# _LT_ENABLE_LOCK
 
 
 # _LT_PROG_AR
 # -----------
 m4_defun([_LT_PROG_AR],
 [AC_CHECK_TOOLS(AR, [ar], false)
 : ${AR=ar}
 : ${AR_FLAGS=cru}
 _LT_DECL([], [AR], [1], [The archiver])
 _LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
 
 AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
   [lt_cv_ar_at_file=no
    AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
      [echo conftest.$ac_objext > conftest.lst
       lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
       AC_TRY_EVAL([lt_ar_try])
       if test "$ac_status" -eq 0; then
 	# Ensure the archiver fails upon bogus file names.
 	rm -f conftest.$ac_objext libconftest.a
 	AC_TRY_EVAL([lt_ar_try])
 	if test "$ac_status" -ne 0; then
           lt_cv_ar_at_file=@
         fi
       fi
       rm -f conftest.* libconftest.a
      ])
   ])
 
 if test "x$lt_cv_ar_at_file" = xno; then
   archiver_list_spec=
 else
   archiver_list_spec=$lt_cv_ar_at_file
 fi
 _LT_DECL([], [archiver_list_spec], [1],
   [How to feed a file listing to the archiver])
 ])# _LT_PROG_AR
 
 
 # _LT_CMD_OLD_ARCHIVE
 # -------------------
 m4_defun([_LT_CMD_OLD_ARCHIVE],
 [_LT_PROG_AR
 
 AC_CHECK_TOOL(STRIP, strip, :)
 test -z "$STRIP" && STRIP=:
 _LT_DECL([], [STRIP], [1], [A symbol stripping program])
 
 AC_CHECK_TOOL(RANLIB, ranlib, :)
 test -z "$RANLIB" && RANLIB=:
 _LT_DECL([], [RANLIB], [1],
     [Commands used to install an old-style archive])
 
 # Determine commands to create old-style static archives.
 old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
 old_postinstall_cmds='chmod 644 $oldlib'
 old_postuninstall_cmds=
 
 if test -n "$RANLIB"; then
   case $host_os in
   openbsd*)
     old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
     ;;
   *)
     old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
     ;;
   esac
   old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
 fi
 
 case $host_os in
   darwin*)
     lock_old_archive_extraction=yes ;;
   *)
     lock_old_archive_extraction=no ;;
 esac
 _LT_DECL([], [old_postinstall_cmds], [2])
 _LT_DECL([], [old_postuninstall_cmds], [2])
 _LT_TAGDECL([], [old_archive_cmds], [2],
     [Commands used to build an old-style archive])
 _LT_DECL([], [lock_old_archive_extraction], [0],
     [Whether to use a lock for old archive extraction])
 ])# _LT_CMD_OLD_ARCHIVE
 
 
 # _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
 #		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
 # ----------------------------------------------------------------
 # Check whether the given compiler option works
 AC_DEFUN([_LT_COMPILER_OPTION],
 [m4_require([_LT_FILEUTILS_DEFAULTS])dnl
 m4_require([_LT_DECL_SED])dnl
 AC_CACHE_CHECK([$1], [$2],
   [$2=no
    m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
    echo "$lt_simple_compile_test_code" > conftest.$ac_ext
    lt_compiler_flag="$3"
    # Insert the option either (1) after the last *FLAGS variable, or
    # (2) before a word containing "conftest.", or (3) at the end.
    # Note that $ac_compile itself does not contain backslashes and begins
    # with a dollar sign (not a hyphen), so the echo should work correctly.
    # The option is referenced via a variable to avoid confusing sed.
    lt_compile=`echo "$ac_compile" | $SED \
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
    (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&AS_MESSAGE_LOG_FD
    echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
      $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
      $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
      if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        $2=yes
      fi
    fi
    $RM conftest*
 ])
 
 if test x"[$]$2" = xyes; then
     m4_if([$5], , :, [$5])
 else
     m4_if([$6], , :, [$6])
 fi
 ])# _LT_COMPILER_OPTION
 
 # Old name:
 AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
 dnl aclocal-1.4 backwards compatibility:
 dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
 
 
 # _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
 #                  [ACTION-SUCCESS], [ACTION-FAILURE])
 # ----------------------------------------------------
 # Check whether the given linker option works
 AC_DEFUN([_LT_LINKER_OPTION],
 [m4_require([_LT_FILEUTILS_DEFAULTS])dnl
 m4_require([_LT_DECL_SED])dnl
 AC_CACHE_CHECK([$1], [$2],
   [$2=no
    save_LDFLAGS="$LDFLAGS"
    LDFLAGS="$LDFLAGS $3"
    echo "$lt_simple_link_test_code" > conftest.$ac_ext
    if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
      # The linker can only warn and ignore the option if not recognized
      # So say no if there are warnings
      if test -s conftest.err; then
        # Append any errors to the config.log.
        cat conftest.err 1>&AS_MESSAGE_LOG_FD
        $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
        $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
        if diff conftest.exp conftest.er2 >/dev/null; then
          $2=yes
        fi
      else
        $2=yes
      fi
    fi
    $RM -r conftest*
    LDFLAGS="$save_LDFLAGS"
 ])
 
 if test x"[$]$2" = xyes; then
     m4_if([$4], , :, [$4])
 else
     m4_if([$5], , :, [$5])
 fi
 ])# _LT_LINKER_OPTION
 
 # Old name:
 AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
 dnl aclocal-1.4 backwards compatibility:
 dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
 
 
 # LT_CMD_MAX_LEN
 #---------------
 AC_DEFUN([LT_CMD_MAX_LEN],
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
 # find the maximum length of command line arguments
 AC_MSG_CHECKING([the maximum length of command line arguments])
 AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
   i=0
   teststring="ABCD"
 
   case $build_os in
   msdosdjgpp*)
     # On DJGPP, this test can blow up pretty badly due to problems in libc
     # (any single argument exceeding 2000 bytes causes a buffer overrun
     # during glob expansion).  Even if it were fixed, the result of this
     # check would be larger than it should be.
     lt_cv_sys_max_cmd_len=12288;    # 12K is about right
     ;;
 
   gnu*)
     # Under GNU Hurd, this test is not required because there is
     # no limit to the length of command line arguments.
     # Libtool will interpret -1 as no limit whatsoever
     lt_cv_sys_max_cmd_len=-1;
     ;;
 
   cygwin* | mingw* | cegcc*)
     # On Win9x/ME, this test blows up -- it succeeds, but takes
     # about 5 minutes as the teststring grows exponentially.
     # Worse, since 9x/ME are not pre-emptively multitasking,
     # you end up with a "frozen" computer, even though with patience
     # the test eventually succeeds (with a max line length of 256k).
     # Instead, let's just punt: use the minimum linelength reported by
     # all of the supported platforms: 8192 (on NT/2K/XP).
     lt_cv_sys_max_cmd_len=8192;
     ;;
 
   mint*)
     # On MiNT this can take a long time and run out of memory.
     lt_cv_sys_max_cmd_len=8192;
     ;;
 
   amigaos*)
     # On AmigaOS with pdksh, this test takes hours, literally.
     # So we just punt and use a minimum line length of 8192.
     lt_cv_sys_max_cmd_len=8192;
     ;;
 
   netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
     # This has been around since 386BSD, at least.  Likely further.
     if test -x /sbin/sysctl; then
       lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
     elif test -x /usr/sbin/sysctl; then
       lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
     else
       lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
     fi
     # And add a safety zone
     lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
     lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
     ;;
 
   interix*)
     # We know the value 262144 and hardcode it with a safety zone (like BSD)
     lt_cv_sys_max_cmd_len=196608
     ;;
 
   os2*)
     # The test takes a long time on OS/2.
     lt_cv_sys_max_cmd_len=8192
     ;;
 
   osf*)
     # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
     # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
     # nice to cause kernel panics so lets avoid the loop below.
     # First set a reasonable default.
     lt_cv_sys_max_cmd_len=16384
     #
     if test -x /sbin/sysconfig; then
       case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
         *1*) lt_cv_sys_max_cmd_len=-1 ;;
       esac
     fi
     ;;
   sco3.2v5*)
     lt_cv_sys_max_cmd_len=102400
     ;;
   sysv5* | sco5v6* | sysv4.2uw2*)
     kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
     if test -n "$kargmax"; then
       lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[	 ]]//'`
     else
       lt_cv_sys_max_cmd_len=32768
     fi
     ;;
   *)
     lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
     if test -n "$lt_cv_sys_max_cmd_len"; then
       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
     else
       # Make teststring a little bigger before we do anything with it.
       # a 1K string should be a reasonable start.
       for i in 1 2 3 4 5 6 7 8 ; do
         teststring=$teststring$teststring
       done
       SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
       # If test is not a shell built-in, we'll probably end up computing a
       # maximum length that is only half of the actual maximum length, but
       # we can't tell.
       while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
 	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
 	      test $i != 17 # 1/2 MB should be enough
       do
         i=`expr $i + 1`
         teststring=$teststring$teststring
       done
       # Only check the string length outside the loop.
       lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
       teststring=
       # Add a significant safety factor because C++ compilers can tack on
       # massive amounts of additional arguments before passing them to the
       # linker.  It appears as though 1/2 is a usable value.
       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
     fi
     ;;
   esac
 ])
 if test -n $lt_cv_sys_max_cmd_len ; then
   AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
 else
   AC_MSG_RESULT(none)
 fi
 max_cmd_len=$lt_cv_sys_max_cmd_len
 _LT_DECL([], [max_cmd_len], [0],
     [What is the maximum length of a command?])
 ])# LT_CMD_MAX_LEN
 
 # Old name:
 AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
 dnl aclocal-1.4 backwards compatibility:
 dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
 
 
 # _LT_HEADER_DLFCN
 # ----------------
 m4_defun([_LT_HEADER_DLFCN],
 [AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
 ])# _LT_HEADER_DLFCN
 
 
 # _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
 #                      ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
 # ----------------------------------------------------------------
 m4_defun([_LT_TRY_DLOPEN_SELF],
 [m4_require([_LT_HEADER_DLFCN])dnl
 if test "$cross_compiling" = yes; then :
   [$4]
 else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
 [#line $LINENO "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
 #include <dlfcn.h>
 #endif
 
 #include <stdio.h>
 
 #ifdef RTLD_GLOBAL
 #  define LT_DLGLOBAL		RTLD_GLOBAL
 #else
 #  ifdef DL_GLOBAL
 #    define LT_DLGLOBAL		DL_GLOBAL
 #  else
 #    define LT_DLGLOBAL		0
 #  endif
 #endif
 
 /* We may have to define LT_DLLAZY_OR_NOW in the command line if we
    find out it does not work in some platform. */
 #ifndef LT_DLLAZY_OR_NOW
 #  ifdef RTLD_LAZY
 #    define LT_DLLAZY_OR_NOW		RTLD_LAZY
 #  else
 #    ifdef DL_LAZY
 #      define LT_DLLAZY_OR_NOW		DL_LAZY
 #    else
 #      ifdef RTLD_NOW
 #        define LT_DLLAZY_OR_NOW	RTLD_NOW
 #      else
 #        ifdef DL_NOW
 #          define LT_DLLAZY_OR_NOW	DL_NOW
 #        else
 #          define LT_DLLAZY_OR_NOW	0
 #        endif
 #      endif
 #    endif
 #  endif
 #endif
 
 /* When -fvisbility=hidden is used, assume the code has been annotated
    correspondingly for the symbols needed.  */
 #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
 int fnord () __attribute__((visibility("default")));
 #endif
 
 int fnord () { return 42; }
 int main ()
 {
   void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
   int status = $lt_dlunknown;
 
   if (self)
     {
       if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
       else
         {
 	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
           else puts (dlerror ());
 	}
       /* dlclose (self); */
     }
   else
     puts (dlerror ());
 
   return status;
 }]
 _LT_EOF
   if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
     (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
     lt_status=$?
     case x$lt_status in
       x$lt_dlno_uscore) $1 ;;
       x$lt_dlneed_uscore) $2 ;;
       x$lt_dlunknown|x*) $3 ;;
     esac
   else :
     # compilation failed
     $3
   fi
 fi
 rm -fr conftest*
 ])# _LT_TRY_DLOPEN_SELF
 
 
 # LT_SYS_DLOPEN_SELF
 # ------------------
 AC_DEFUN([LT_SYS_DLOPEN_SELF],
 [m4_require([_LT_HEADER_DLFCN])dnl
 if test "x$enable_dlopen" != xyes; then
   enable_dlopen=unknown
   enable_dlopen_self=unknown
   enable_dlopen_self_static=unknown
 else
   lt_cv_dlopen=no
   lt_cv_dlopen_libs=
 
   case $host_os in
   beos*)
     lt_cv_dlopen="load_add_on"
     lt_cv_dlopen_libs=
     lt_cv_dlopen_self=yes
     ;;
 
   mingw* | pw32* | cegcc*)
     lt_cv_dlopen="LoadLibrary"
     lt_cv_dlopen_libs=
     ;;
 
   cygwin*)
     lt_cv_dlopen="dlopen"
     lt_cv_dlopen_libs=
     ;;
 
   darwin*)
   # if libdl is installed we need to link against it
     AC_CHECK_LIB([dl], [dlopen],
 		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
     lt_cv_dlopen="dyld"
     lt_cv_dlopen_libs=
     lt_cv_dlopen_self=yes
     ])
     ;;
 
   *)
     AC_CHECK_FUNC([shl_load],
 	  [lt_cv_dlopen="shl_load"],
       [AC_CHECK_LIB([dld], [shl_load],
 	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
 	[AC_CHECK_FUNC([dlopen],
 	      [lt_cv_dlopen="dlopen"],
 	  [AC_CHECK_LIB([dl], [dlopen],
 		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
 	    [AC_CHECK_LIB([svld], [dlopen],
 		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
 	      [AC_CHECK_LIB([dld], [dld_link],
 		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
 	      ])
 	    ])
 	  ])
 	])
       ])
     ;;
   esac
 
   if test "x$lt_cv_dlopen" != xno; then
     enable_dlopen=yes
   else
     enable_dlopen=no
   fi
 
   case $lt_cv_dlopen in
   dlopen)
     save_CPPFLAGS="$CPPFLAGS"
     test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
 
     save_LDFLAGS="$LDFLAGS"
     wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
 
     save_LIBS="$LIBS"
     LIBS="$lt_cv_dlopen_libs $LIBS"
 
     AC_CACHE_CHECK([whether a program can dlopen itself],
 	  lt_cv_dlopen_self, [dnl
 	  _LT_TRY_DLOPEN_SELF(
 	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
 	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
     ])
 
     if test "x$lt_cv_dlopen_self" = xyes; then
       wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
       AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
 	  lt_cv_dlopen_self_static, [dnl
 	  _LT_TRY_DLOPEN_SELF(
 	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
 	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
       ])
     fi
 
     CPPFLAGS="$save_CPPFLAGS"
     LDFLAGS="$save_LDFLAGS"
     LIBS="$save_LIBS"
     ;;
   esac
 
   case $lt_cv_dlopen_self in
   yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
   *) enable_dlopen_self=unknown ;;
   esac
 
   case $lt_cv_dlopen_self_static in
   yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
   *) enable_dlopen_self_static=unknown ;;
   esac
 fi
 _LT_DECL([dlopen_support], [enable_dlopen], [0],
 	 [Whether dlopen is supported])
 _LT_DECL([dlopen_self], [enable_dlopen_self], [0],
 	 [Whether dlopen of programs is supported])
 _LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
 	 [Whether dlopen of statically linked programs is supported])
 ])# LT_SYS_DLOPEN_SELF
 
 # Old name:
 AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
 dnl aclocal-1.4 backwards compatibility:
 dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
 
 
 # _LT_COMPILER_C_O([TAGNAME])
 # ---------------------------
 # Check to see if options -c and -o are simultaneously supported by compiler.
 # This macro does not hard code the compiler like AC_PROG_CC_C_O.
 m4_defun([_LT_COMPILER_C_O],
 [m4_require([_LT_DECL_SED])dnl
 m4_require([_LT_FILEUTILS_DEFAULTS])dnl
 m4_require([_LT_TAG_COMPILER])dnl
 AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
   [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
   [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
    $RM -r conftest 2>/dev/null
    mkdir conftest
    cd conftest
    mkdir out
    echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
    lt_compiler_flag="-o out/conftest2.$ac_objext"
    # Insert the option either (1) after the last *FLAGS variable, or
    # (2) before a word containing "conftest.", or (3) at the end.
    # Note that $ac_compile itself does not contain backslashes and begins
    # with a dollar sign (not a hyphen), so the echo should work correctly.
    lt_compile=`echo "$ac_compile" | $SED \
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
    (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&AS_MESSAGE_LOG_FD
    echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
      $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
      $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
      if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
        _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
      fi
    fi
    chmod u+w . 2>&AS_MESSAGE_LOG_FD
    $RM conftest*
    # SGI C++ compiler will create directory out/ii_files/ for
    # template instantiation
    test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
    $RM out/* && rmdir out
    cd ..
    $RM -r conftest
    $RM conftest*
 ])
 _LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
 	[Does compiler simultaneously support -c and -o options?])
 ])# _LT_COMPILER_C_O
 
 
 # _LT_COMPILER_FILE_LOCKS([TAGNAME])
 # ----------------------------------
 # Check to see if we can do hard links to lock some files if needed
 m4_defun([_LT_COMPILER_FILE_LOCKS],
 [m4_require([_LT_ENABLE_LOCK])dnl
 m4_require([_LT_FILEUTILS_DEFAULTS])dnl
 _LT_COMPILER_C_O([$1])
 
 hard_links="nottested"
 if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
   # do not overwrite the value of need_locks provided by the user
   AC_MSG_CHECKING([if we can lock with hard links])
   hard_links=yes
   $RM conftest*
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
   touch conftest.a
   ln conftest.a conftest.b 2>&5 || hard_links=no
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
   AC_MSG_RESULT([$hard_links])
   if test "$hard_links" = no; then
     AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
     need_locks=warn
   fi
 else
   need_locks=no
 fi
 _LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
 ])# _LT_COMPILER_FILE_LOCKS
 
 
 # _LT_CHECK_OBJDIR
 # ----------------
 m4_defun([_LT_CHECK_OBJDIR],
 [AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
 [rm -f .libs 2>/dev/null
 mkdir .libs 2>/dev/null
 if test -d .libs; then
   lt_cv_objdir=.libs
 else
   # MS-DOS does not allow filenames that begin with a dot.
   lt_cv_objdir=_libs
 fi
 rmdir .libs 2>/dev/null])
 objdir=$lt_cv_objdir
 _LT_DECL([], [objdir], [0],
          [The name of the directory that contains temporary libtool files])dnl
 m4_pattern_allow([LT_OBJDIR])dnl
 AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
   [Define to the sub-directory in which libtool stores uninstalled libraries.])
 ])# _LT_CHECK_OBJDIR
 
 
 # _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
 # --------------------------------------
 # Check hardcoding attributes.
 m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
 [AC_MSG_CHECKING([how to hardcode library paths into programs])
 _LT_TAGVAR(hardcode_action, $1)=
 if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
    test -n "$_LT_TAGVAR(runpath_var, $1)" ||
    test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
 
   # We can hardcode non-existent directories.
   if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
      # If the only mechanism to avoid hardcoding is shlibpath_var, we
      # have to relink, otherwise we might link with an installed library
      # when we should be linking with a yet-to-be-installed one
      ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
      test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
     # Linking always hardcodes the temporary library directory.
     _LT_TAGVAR(hardcode_action, $1)=relink
   else
     # We can link without hardcoding, and we can hardcode nonexisting dirs.
     _LT_TAGVAR(hardcode_action, $1)=immediate
   fi
 else
   # We cannot hardcode anything, or else we can only hardcode existing
   # directories.
   _LT_TAGVAR(hardcode_action, $1)=unsupported
 fi
 AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
 
 if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
    test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
   # Fast installation is not supported
   enable_fast_install=no
 elif test "$shlibpath_overrides_runpath" = yes ||
      test "$enable_shared" = no; then
   # Fast installation is not necessary
   enable_fast_install=needless
 fi
 _LT_TAGDECL([], [hardcode_action], [0],
     [How to hardcode a shared library path into an executable])
 ])# _LT_LINKER_HARDCODE_LIBPATH
 
 
 # _LT_CMD_STRIPLIB
 # ----------------
 m4_defun([_LT_CMD_STRIPLIB],
 [m4_require([_LT_DECL_EGREP])
 striplib=
 old_striplib=
 AC_MSG_CHECKING([whether stripping libraries is possible])
 if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
   test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
   test -z "$striplib" && striplib="$STRIP --strip-unneeded"
   AC_MSG_RESULT([yes])
 else
 # FIXME - insert some real tests, host_os isn't really good enough
   case $host_os in
   darwin*)
     if test -n "$STRIP" ; then
       striplib="$STRIP -x"
       old_striplib="$STRIP -S"
       AC_MSG_RESULT([yes])
     else
       AC_MSG_RESULT([no])
     fi
     ;;
   *)
     AC_MSG_RESULT([no])
     ;;
   esac
 fi
 _LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
 _LT_DECL([], [striplib], [1])
 ])# _LT_CMD_STRIPLIB
 
 
 # _LT_SYS_DYNAMIC_LINKER([TAG])
 # -----------------------------
 # PORTME Fill in your ld.so characteristics
 m4_defun([_LT_SYS_DYNAMIC_LINKER],
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
 m4_require([_LT_DECL_EGREP])dnl
 m4_require([_LT_FILEUTILS_DEFAULTS])dnl
 m4_require([_LT_DECL_OBJDUMP])dnl
 m4_require([_LT_DECL_SED])dnl
 m4_require([_LT_CHECK_SHELL_FEATURES])dnl
 AC_MSG_CHECKING([dynamic linker characteristics])
 m4_if([$1],
 	[], [
 if test "$GCC" = yes; then
   case $host_os in
     darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
     *) lt_awk_arg="/^libraries:/" ;;
   esac
   case $host_os in
     mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
     *) lt_sed_strip_eq="s,=/,/,g" ;;
   esac
   lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
   case $lt_search_path_spec in
   *\;*)
     # if the path contains ";" then we assume it to be the separator
     # otherwise default to the standard path separator (i.e. ":") - it is
     # assumed that no part of a normal pathname contains ";" but that should
     # okay in the real world where ";" in dirpaths is itself problematic.
     lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
     ;;
   *)
     lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
     ;;
   esac
   # Ok, now we have the path, separated by spaces, we can step through it
   # and add multilib dir if necessary...
   lt_tmp_lt_search_path_spec=
   lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
   # ...but if some path already ends with the multilib dir we assume
   # that all is fine and trust -print-search-dirs as is (GCC 4.2 or newer).
   case "$lt_multi_os_dir; $lt_search_path_spec " in
   "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*)
     lt_multi_os_dir=
     ;;
   esac
   for lt_sys_path in $lt_search_path_spec; do
     if test -d "$lt_sys_path$lt_multi_os_dir"; then
       lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir"
     elif test -n "$lt_multi_os_dir"; then
       test -d "$lt_sys_path" && \
 	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
     fi
   done
   lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
 BEGIN {RS=" "; FS="/|\n";} {
   lt_foo="";
   lt_count=0;
   for (lt_i = NF; lt_i > 0; lt_i--) {
     if ($lt_i != "" && $lt_i != ".") {
       if ($lt_i == "..") {
         lt_count++;
       } else {
         if (lt_count == 0) {
           lt_foo="/" $lt_i lt_foo;
         } else {
           lt_count--;
         }
       }
     }
   }
   if (lt_foo != "") { lt_freq[[lt_foo]]++; }
   if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
 }'`
   # AWK program above erroneously prepends '/' to C:/dos/paths
   # for these hosts.
   case $host_os in
     mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
       $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
   esac
   sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
 else
   sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
 fi])
 library_names_spec=
 libname_spec='lib$name'
 soname_spec=
 shrext_cmds=".so"
 postinstall_cmds=
 postuninstall_cmds=
 finish_cmds=
 finish_eval=
 shlibpath_var=
 shlibpath_overrides_runpath=unknown
 version_type=none
 dynamic_linker="$host_os ld.so"
 sys_lib_dlsearch_path_spec="/lib /usr/lib"
 need_lib_prefix=unknown
 hardcode_into_libs=no
 
 # when you set need_version to no, make sure it does not cause -set_version
 # flags to be left without arguments
 need_version=unknown
 
 case $host_os in
 aix3*)
   version_type=linux # correct to gnu/linux during the next big refactor
   library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
   shlibpath_var=LIBPATH
 
   # AIX 3 has no versioning support, so we append a major version to the name.
   soname_spec='${libname}${release}${shared_ext}$major'
   ;;
 
 aix[[4-9]]*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   hardcode_into_libs=yes
   if test "$host_cpu" = ia64; then
     # AIX 5 supports IA64
     library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
     shlibpath_var=LD_LIBRARY_PATH
   else
     # With GCC up to 2.95.x, collect2 would create an import file
     # for dependence libraries.  The import file would start with
     # the line `#! .'.  This would cause the generated library to
     # depend on `.', always an invalid library.  This was fixed in
     # development snapshots of GCC prior to 3.0.
     case $host_os in
       aix4 | aix4.[[01]] | aix4.[[01]].*)
       if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
 	   echo ' yes '
 	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
 	:
       else
 	can_build_shared=no
       fi
       ;;
     esac
     # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
     # soname into executable. Probably we can add versioning support to
     # collect2, so additional links can be useful in future.
     if test "$aix_use_runtimelinking" = yes; then
       # If using run time linking (on AIX 4.2 or later) use lib<name>.so
       # instead of lib<name>.a to let people know that these are not
       # typical AIX shared libraries.
       library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
     else
       # We preserve .a as extension for shared libraries through AIX4.2
       # and later when we are not doing run time linking.
       library_names_spec='${libname}${release}.a $libname.a'
       soname_spec='${libname}${release}${shared_ext}$major'
     fi
     shlibpath_var=LIBPATH
   fi
   ;;
 
 amigaos*)
   case $host_cpu in
   powerpc)
     # Since July 2007 AmigaOS4 officially supports .so libraries.
     # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
     ;;
   m68k)
     library_names_spec='$libname.ixlibrary $libname.a'
     # Create ${libname}_ixlibrary.a entries in /sys/libs.
     finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
     ;;
   esac
   ;;
 
 beos*)
   library_names_spec='${libname}${shared_ext}'
   dynamic_linker="$host_os ld.so"
   shlibpath_var=LIBRARY_PATH
   ;;
 
 bsdi[[45]]*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
   sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
   # the default ld.so.conf also contains /usr/contrib/lib and
   # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
   # libtool to hard-code these into programs
   ;;
 
 cygwin* | mingw* | pw32* | cegcc*)
   version_type=windows
   shrext_cmds=".dll"
   need_version=no
   need_lib_prefix=no
 
   case $GCC,$cc_basename in
   yes,*)
     # gcc
     library_names_spec='$libname.dll.a'
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
     postinstall_cmds='base_file=`basename \${file}`~
       dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
       $install_prog $dir/$dlname \$dldir/$dlname~
       chmod a+x \$dldir/$dlname~
       if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
         eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
       fi'
     postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
       dlpath=$dir/\$dldll~
        $RM \$dlpath'
     shlibpath_overrides_runpath=yes
 
     case $host_os in
     cygwin*)
       # Cygwin DLLs use 'cyg' prefix rather than 'lib'
       #soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
       soname_spec='`echo ${libname} | sed -e 's/^lib//'`${shared_ext}'
 m4_if([$1], [],[
       sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
       ;;
     mingw* | cegcc*)
       # MinGW DLLs use traditional 'lib' prefix
       #soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
       soname_spec='`echo ${libname} | $SED -e 's/^lib//'`${shared_ext}'
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
       library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
       ;;
     esac
     dynamic_linker='Win32 ld.exe'
     ;;
 
   *,cl*)
     # Native MSVC
     libname_spec='$name'
     soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
     library_names_spec='${libname}.dll.lib'
 
     case $build_os in
     mingw*)
       sys_lib_search_path_spec=
       lt_save_ifs=$IFS
       IFS=';'
       for lt_path in $LIB
       do
         IFS=$lt_save_ifs
         # Let DOS variable expansion print the short 8.3 style file name.
         lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
         sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
       done
       IFS=$lt_save_ifs
       # Convert to MSYS style.
       sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
       ;;
     cygwin*)
       # Convert to unix form, then to dos form, then back to unix form
       # but this time dos style (no spaces!) so that the unix form looks
       # like /cygdrive/c/PROGRA~1:/cygdr...
       sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
       sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
       sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
       ;;
     *)
       sys_lib_search_path_spec="$LIB"
       if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
         # It is most probably a Windows format PATH.
         sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
       else
         sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
       fi
       # FIXME: find the short name or the path components, as spaces are
       # common. (e.g. "Program Files" -> "PROGRA~1")
       ;;
     esac
 
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
     postinstall_cmds='base_file=`basename \${file}`~
       dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
       $install_prog $dir/$dlname \$dldir/$dlname'
     postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
       dlpath=$dir/\$dldll~
        $RM \$dlpath'
     shlibpath_overrides_runpath=yes
     dynamic_linker='Win32 link.exe'
     ;;
 
   *)
     # Assume MSVC wrapper
     library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
     dynamic_linker='Win32 ld.exe'
     ;;
   esac
   # FIXME: first we should search . and the directory the executable is in
   shlibpath_var=PATH
   ;;
 
 darwin* | rhapsody*)
   dynamic_linker="$host_os dyld"
   version_type=darwin
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
   soname_spec='${libname}${release}${major}$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
   shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
 m4_if([$1], [],[
   sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
   sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
   ;;
 
 dgux*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
 freebsd* | dragonfly*)
   # DragonFly does not have aout.  When/if they implement a new
   # versioning mechanism, adjust this.
   if test -x /usr/bin/objformat; then
     objformat=`/usr/bin/objformat`
   else
     case $host_os in
     freebsd[[23]].*) objformat=aout ;;
     *) objformat=elf ;;
     esac
   fi
   version_type=freebsd-$objformat
   case $version_type in
     freebsd-elf*)
       library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
       need_version=no
       need_lib_prefix=no
       ;;
     freebsd-*)
       library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
       need_version=yes
       ;;
   esac
   shlibpath_var=LD_LIBRARY_PATH
   case $host_os in
   freebsd2.*)
     shlibpath_overrides_runpath=yes
     ;;
   freebsd3.[[01]]* | freebsdelf3.[[01]]*)
     shlibpath_overrides_runpath=yes
     hardcode_into_libs=yes
     ;;
   freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
   freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
     shlibpath_overrides_runpath=no
     hardcode_into_libs=yes
     ;;
   *) # from 4.6 on, and DragonFly
     shlibpath_overrides_runpath=yes
     hardcode_into_libs=yes
     ;;
   esac
   ;;
 
 gnu*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
   ;;
 
 haiku*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   dynamic_linker="$host_os runtime_loader"
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
   hardcode_into_libs=yes
   ;;
 
 hpux9* | hpux10* | hpux11*)
   # Give a soname corresponding to the major version so that dld.sl refuses to
   # link against other versions.
   version_type=sunos
   need_lib_prefix=no
   need_version=no
   case $host_cpu in
   ia64*)
     shrext_cmds='.so'
     hardcode_into_libs=yes
     dynamic_linker="$host_os dld.so"
     shlibpath_var=LD_LIBRARY_PATH
     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
     soname_spec='${libname}${release}${shared_ext}$major'
     if test "X$HPUX_IA64_MODE" = X32; then
       sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
     else
       sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
     fi
     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
   hppa*64*)
     shrext_cmds='.sl'
     hardcode_into_libs=yes
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
     soname_spec='${libname}${release}${shared_ext}$major'
     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
   *)
     shrext_cmds='.sl'
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=SHLIB_PATH
     shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
     soname_spec='${libname}${release}${shared_ext}$major'
     ;;
   esac
   # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
   postinstall_cmds='chmod 555 $lib'
   # or fails outright, so override atomically:
   install_override_mode=555
   ;;
 
 interix[[3-9]]*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
   ;;
 
 irix5* | irix6* | nonstopux*)
   case $host_os in
     nonstopux*) version_type=nonstopux ;;
     *)
 	if test "$lt_cv_prog_gnu_ld" = yes; then
 		version_type=linux # correct to gnu/linux during the next big refactor
 	else
 		version_type=irix
 	fi ;;
   esac
   need_lib_prefix=no
   need_version=no
   soname_spec='${libname}${release}${shared_ext}$major'
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
   case $host_os in
   irix5* | nonstopux*)
     libsuff= shlibsuff=
     ;;
   *)
     case $LD in # libtool.m4 will add one of these switches to LD
     *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
       libsuff= shlibsuff= libmagic=32-bit;;
     *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
       libsuff=32 shlibsuff=N32 libmagic=N32;;
     *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
       libsuff=64 shlibsuff=64 libmagic=64-bit;;
     *) libsuff= shlibsuff= libmagic=never-match;;
     esac
     ;;
   esac
   shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
   shlibpath_overrides_runpath=no
   sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
   sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
   hardcode_into_libs=yes
   ;;
 
 # No shared lib support for Linux oldld, aout, or coff.
 linux*oldld* | linux*aout* | linux*coff*)
   dynamic_linker=no
   ;;
 
 # This must be glibc/ELF.
 linux* | k*bsd*-gnu | kopensolaris*-gnu)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
 
   # Some binutils ld are patched to set DT_RUNPATH
   AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
     [lt_cv_shlibpath_overrides_runpath=no
     save_LDFLAGS=$LDFLAGS
     save_libdir=$libdir
     eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
 	 LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
     AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
       [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
 	 [lt_cv_shlibpath_overrides_runpath=yes])])
     LDFLAGS=$save_LDFLAGS
     libdir=$save_libdir
     ])
   shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
 
   # This implies no fast_install, which is unacceptable.
   # Some rework will be needed to allow for fast_install
   # before this can be enabled.
   hardcode_into_libs=yes
 
   # Append ld.so.conf contents to the search path
   if test -f /etc/ld.so.conf; then
     lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
     sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
   fi
 
   # We used to test for /lib/ld.so.1 and disable shared libraries on
   # powerpc, because MkLinux only supported shared libraries with the
   # GNU dynamic linker.  Since this was broken with cross compilers,
   # most powerpc-linux boxes support dynamic linking these days and
   # people can always --disable-shared, the test was removed, and we
   # assume the GNU/Linux dynamic linker is in use.
   dynamic_linker='GNU/Linux ld.so'
   ;;
 
 netbsd*)
   version_type=sunos
   need_lib_prefix=no
   need_version=no
   if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
     finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
     dynamic_linker='NetBSD (a.out) ld.so'
   else
     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
     soname_spec='${libname}${release}${shared_ext}$major'
     dynamic_linker='NetBSD ld.elf_so'
   fi
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   hardcode_into_libs=yes
   ;;
 
 newsos6)
   version_type=linux # correct to gnu/linux during the next big refactor
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   ;;
 
 *nto* | *qnx*)
   version_type=qnx
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
   dynamic_linker='ldqnx.so'
   ;;
 
 openbsd*)
   version_type=sunos
   sys_lib_dlsearch_path_spec="/usr/lib"
   need_lib_prefix=no
   # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
   case $host_os in
     openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
     *)				need_version=no  ;;
   esac
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
     case $host_os in
       openbsd2.[[89]] | openbsd2.[[89]].*)
 	shlibpath_overrides_runpath=no
 	;;
       *)
 	shlibpath_overrides_runpath=yes
 	;;
       esac
   else
     shlibpath_overrides_runpath=yes
   fi
   ;;
 
 os2*)
   libname_spec='$name'
   shrext_cmds=".dll"
   need_lib_prefix=no
   library_names_spec='$libname${shared_ext} $libname.a'
   dynamic_linker='OS/2 ld.exe'
   shlibpath_var=LIBPATH
   ;;
 
 osf3* | osf4* | osf5*)
   version_type=osf
   need_lib_prefix=no
   need_version=no
   soname_spec='${libname}${release}${shared_ext}$major'
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   shlibpath_var=LD_LIBRARY_PATH
   sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
   sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
   ;;
 
 rdos*)
   dynamic_linker=no
   ;;
 
 solaris*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   hardcode_into_libs=yes
   # ldd complains unless libraries are executable
   postinstall_cmds='chmod +x $lib'
   ;;
 
 sunos4*)
   version_type=sunos
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
   finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   if test "$with_gnu_ld" = yes; then
     need_lib_prefix=no
   fi
   need_version=yes
   ;;
 
 sysv4 | sysv4.3*)
   version_type=linux # correct to gnu/linux during the next big refactor
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
   case $host_vendor in
     sni)
       shlibpath_overrides_runpath=no
       need_lib_prefix=no
       runpath_var=LD_RUN_PATH
       ;;
     siemens)
       need_lib_prefix=no
       ;;
     motorola)
       need_lib_prefix=no
       need_version=no
       shlibpath_overrides_runpath=no
       sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
       ;;
   esac
   ;;
 
 sysv4*MP*)
   if test -d /usr/nec ;then
     version_type=linux # correct to gnu/linux during the next big refactor
     library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
     soname_spec='$libname${shared_ext}.$major'
     shlibpath_var=LD_LIBRARY_PATH
   fi
   ;;
 
 sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
   version_type=freebsd-elf
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   hardcode_into_libs=yes
   if test "$with_gnu_ld" = yes; then
     sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
   else
     sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
     case $host_os in
       sco3.2v5*)
         sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
 	;;
     esac
   fi
   sys_lib_dlsearch_path_spec='/usr/lib'
   ;;
 
 tpf*)
   # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
   ;;
 
 uts4*)
   version_type=linux # correct to gnu/linux during the next big refactor
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
 *)
   dynamic_linker=no
   ;;
 esac
 AC_MSG_RESULT([$dynamic_linker])
 test "$dynamic_linker" = no && can_build_shared=no
 
 variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
 if test "$GCC" = yes; then
   variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
 fi
 
 if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
   sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
 fi
 if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
   sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
 fi
 
 _LT_DECL([], [variables_saved_for_relink], [1],
     [Variables whose values should be saved in libtool wrapper scripts and
     restored at link time])
 _LT_DECL([], [need_lib_prefix], [0],
     [Do we need the "lib" prefix for modules?])
 _LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
 _LT_DECL([], [version_type], [0], [Library versioning type])
 _LT_DECL([], [runpath_var], [0],  [Shared library runtime path variable])
 _LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
 _LT_DECL([], [shlibpath_overrides_runpath], [0],
     [Is shlibpath searched before the hard-coded library search path?])
 _LT_DECL([], [libname_spec], [1], [Format of library name prefix])
 _LT_DECL([], [library_names_spec], [1],
     [[List of archive names.  First name is the real one, the rest are links.
     The last name is the one that the linker finds with -lNAME]])
 _LT_DECL([], [soname_spec], [1],
     [[The coded name of the library, if different from the real name]])
 _LT_DECL([], [install_override_mode], [1],
     [Permission mode override for installation of shared libraries])
 _LT_DECL([], [postinstall_cmds], [2],
     [Command to use after installation of a shared archive])
 _LT_DECL([], [postuninstall_cmds], [2],
     [Command to use after uninstallation of a shared archive])
 _LT_DECL([], [finish_cmds], [2],
     [Commands used to finish a libtool library installation in a directory])
 _LT_DECL([], [finish_eval], [1],
     [[As "finish_cmds", except a single script fragment to be evaled but
     not shown]])
 _LT_DECL([], [hardcode_into_libs], [0],
     [Whether we should hardcode library paths into libraries])
 _LT_DECL([], [sys_lib_search_path_spec], [2],
     [Compile-time system search path for libraries])
 _LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
     [Run-time system search path for libraries])
 ])# _LT_SYS_DYNAMIC_LINKER
 
 
 # _LT_PATH_TOOL_PREFIX(TOOL)
 # --------------------------
 # find a file program which can recognize shared library
 AC_DEFUN([_LT_PATH_TOOL_PREFIX],
 [m4_require([_LT_DECL_EGREP])dnl
 AC_MSG_CHECKING([for $1])
 AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
 [case $MAGIC_CMD in
 [[\\/*] |  ?:[\\/]*])
   lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
   ;;
 *)
   lt_save_MAGIC_CMD="$MAGIC_CMD"
   lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
 dnl $ac_dummy forces splitting on constant user-supplied paths.
 dnl POSIX.2 word splitting is done only on the output of word expansions,
 dnl not every word.  This closes a longstanding sh security hole.
   ac_dummy="m4_if([$2], , $PATH, [$2])"
   for ac_dir in $ac_dummy; do
     IFS="$lt_save_ifs"
     test -z "$ac_dir" && ac_dir=.
     if test -f $ac_dir/$1; then
       lt_cv_path_MAGIC_CMD="$ac_dir/$1"
       if test -n "$file_magic_test_file"; then
 	case $deplibs_check_method in
 	"file_magic "*)
 	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
 	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
 	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
 	    $EGREP "$file_magic_regex" > /dev/null; then
 	    :
 	  else
 	    cat <<_LT_EOF 1>&2
 
 *** Warning: the command libtool uses to detect shared libraries,
 *** $file_magic_cmd, produces output that libtool cannot recognize.
 *** The result is that libtool may fail to recognize shared libraries
 *** as such.  This will affect the creation of libtool libraries that
 *** depend on shared libraries, but programs linked with such libtool
 *** libraries will work regardless of this problem.  Nevertheless, you
 *** may want to report the problem to your system manager and/or to
 *** bug-libtool@gnu.org
 
 _LT_EOF
 	  fi ;;
 	esac
       fi
       break
     fi
   done
   IFS="$lt_save_ifs"
   MAGIC_CMD="$lt_save_MAGIC_CMD"
   ;;
 esac])
 MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
 if test -n "$MAGIC_CMD"; then
   AC_MSG_RESULT($MAGIC_CMD)
 else
   AC_MSG_RESULT(no)
 fi
 _LT_DECL([], [MAGIC_CMD], [0],
 	 [Used to examine libraries when file_magic_cmd begins with "file"])dnl
 ])# _LT_PATH_TOOL_PREFIX
 
 # Old name:
 AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
 dnl aclocal-1.4 backwards compatibility:
 dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
 
 
 # _LT_PATH_MAGIC
 # --------------
 # find a file program which can recognize a shared library
 m4_defun([_LT_PATH_MAGIC],
 [_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
 if test -z "$lt_cv_path_MAGIC_CMD"; then
   if test -n "$ac_tool_prefix"; then
     _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
   else
     MAGIC_CMD=:
   fi
 fi
 ])# _LT_PATH_MAGIC
 
 
 # LT_PATH_LD
 # ----------
 # find the pathname to the GNU or non-GNU linker
 AC_DEFUN([LT_PATH_LD],
 [AC_REQUIRE([AC_PROG_CC])dnl
 AC_REQUIRE([AC_CANONICAL_HOST])dnl
 AC_REQUIRE([AC_CANONICAL_BUILD])dnl
 m4_require([_LT_DECL_SED])dnl
 m4_require([_LT_DECL_EGREP])dnl
 m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
 
 AC_ARG_WITH([gnu-ld],
     [AS_HELP_STRING([--with-gnu-ld],
 	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
     [test "$withval" = no || with_gnu_ld=yes],
     [with_gnu_ld=no])dnl
 
 ac_prog=ld
 if test "$GCC" = yes; then
   # Check if gcc -print-prog-name=ld gives a path.
   AC_MSG_CHECKING([for ld used by $CC])
   case $host in
   *-*-mingw*)
     # gcc leaves a trailing carriage return which upsets mingw
     ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
   *)
     ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
   esac
   case $ac_prog in
     # Accept absolute paths.
     [[\\/]]* | ?:[[\\/]]*)
       re_direlt='/[[^/]][[^/]]*/\.\./'
       # Canonicalize the pathname of ld
       ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
       while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
 	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
       done
       test -z "$LD" && LD="$ac_prog"
       ;;
   "")
     # If it fails, then pretend we aren't using GCC.
     ac_prog=ld
     ;;
   *)
     # If it is relative, then search for the first ld in PATH.
     with_gnu_ld=unknown
     ;;
   esac
 elif test "$with_gnu_ld" = yes; then
   AC_MSG_CHECKING([for GNU ld])
 else
   AC_MSG_CHECKING([for non-GNU ld])
 fi
 AC_CACHE_VAL(lt_cv_path_LD,
 [if test -z "$LD"; then
   lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
   for ac_dir in $PATH; do
     IFS="$lt_save_ifs"
     test -z "$ac_dir" && ac_dir=.
     if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
       lt_cv_path_LD="$ac_dir/$ac_prog"
       # Check to see if the program is GNU ld.  I'd rather use --version,
       # but apparently some variants of GNU ld only accept -v.
       # Break only if it was the GNU/non-GNU ld that we prefer.
       case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
       *GNU* | *'with BFD'*)
 	test "$with_gnu_ld" != no && break
 	;;
       *)
 	test "$with_gnu_ld" != yes && break
 	;;
       esac
     fi
   done
   IFS="$lt_save_ifs"
 else
   lt_cv_path_LD="$LD" # Let the user override the test with a path.
 fi])
 LD="$lt_cv_path_LD"
 if test -n "$LD"; then
   AC_MSG_RESULT($LD)
 else
   AC_MSG_RESULT(no)
 fi
 test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
 _LT_PATH_LD_GNU
 AC_SUBST([LD])
 
 _LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
 ])# LT_PATH_LD
 
 # Old names:
 AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
 AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
 dnl aclocal-1.4 backwards compatibility:
 dnl AC_DEFUN([AM_PROG_LD], [])
 dnl AC_DEFUN([AC_PROG_LD], [])
 
 
 # _LT_PATH_LD_GNU
 #- --------------
 m4_defun([_LT_PATH_LD_GNU],
 [AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
 [# I'd rather use --version here, but apparently some GNU lds only accept -v.
 case `$LD -v 2>&1 </dev/null` in
 *GNU* | *'with BFD'*)
   lt_cv_prog_gnu_ld=yes
   ;;
 *)
   lt_cv_prog_gnu_ld=no
   ;;
 esac])
 with_gnu_ld=$lt_cv_prog_gnu_ld
 ])# _LT_PATH_LD_GNU
 
 
 # _LT_CMD_RELOAD
 # --------------
 # find reload flag for linker
 #   -- PORTME Some linkers may need a different reload flag.
 m4_defun([_LT_CMD_RELOAD],
 [AC_CACHE_CHECK([for $LD option to reload object files],
   lt_cv_ld_reload_flag,
   [lt_cv_ld_reload_flag='-r'])
 reload_flag=$lt_cv_ld_reload_flag
 case $reload_flag in
 "" | " "*) ;;
 *) reload_flag=" $reload_flag" ;;
 esac
 reload_cmds='$LD$reload_flag -o $output$reload_objs'
 case $host_os in
   cygwin* | mingw* | pw32* | cegcc*)
     if test "$GCC" != yes; then
       reload_cmds=false
     fi
     ;;
   darwin*)
     if test "$GCC" = yes; then
       reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
     else
       reload_cmds='$LD$reload_flag -o $output$reload_objs'
     fi
     ;;
 esac
 _LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
 _LT_TAGDECL([], [reload_cmds], [2])dnl
 ])# _LT_CMD_RELOAD
 
 
 # _LT_CHECK_MAGIC_METHOD
 # ----------------------
 # how to check for library dependencies
 #  -- PORTME fill in with the dynamic library characteristics
 m4_defun([_LT_CHECK_MAGIC_METHOD],
 [m4_require([_LT_DECL_EGREP])
 m4_require([_LT_DECL_OBJDUMP])
 AC_CACHE_CHECK([how to recognize dependent libraries],
 lt_cv_deplibs_check_method,
 [lt_cv_file_magic_cmd='$MAGIC_CMD'
 lt_cv_file_magic_test_file=
 lt_cv_deplibs_check_method='unknown'
 # Need to set the preceding variable on all platforms that support
 # interlibrary dependencies.
 # 'none' -- dependencies not supported.
 # `unknown' -- same as none, but documents that we really don't know.
 # 'pass_all' -- all dependencies passed with no checks.
 # 'test_compile' -- check by making test program.
 # 'file_magic [[regex]]' -- check by looking for files in library path
 # which responds to the $file_magic_cmd with a given extended regex.
 # If you have `file' or equivalent on your system and you're not sure
 # whether `pass_all' will *always* work, you probably want this one.
 
 case $host_os in
 aix[[4-9]]*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
 beos*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
 bsdi[[45]]*)
   lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
   lt_cv_file_magic_cmd='/usr/bin/file -L'
   lt_cv_file_magic_test_file=/shlib/libc.so
   ;;
 
 cygwin*)
   # func_win32_libid is a shell function defined in ltmain.sh
   lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
   lt_cv_file_magic_cmd='func_win32_libid'
   lt_cv_deplibs_check_method=pass_all
   ;;
 
 mingw* | pw32*)
   # Base MSYS/MinGW do not provide the 'file' command needed by
   # func_win32_libid shell function, so use a weaker test based on 'objdump',
   # unless we find 'file', for example because we are cross-compiling.
   # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
   if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
     lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
     lt_cv_file_magic_cmd='func_win32_libid'
   else
     # Keep this pattern in sync with the one in func_win32_libid.
     lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
     lt_cv_file_magic_cmd='$OBJDUMP -f'
   fi
   lt_cv_deplibs_check_method=pass_all
   ;;
 
 cegcc*)
   # use the weaker test based on 'objdump'. See mingw*.
   lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
   lt_cv_file_magic_cmd='$OBJDUMP -f'
   ;;
 
 darwin* | rhapsody*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
 freebsd* | dragonfly*)
   if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
     case $host_cpu in
     i*86 )
       # Not sure whether the presence of OpenBSD here was a mistake.
       # Let's accept both of them until this is cleared up.
       lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
       lt_cv_file_magic_cmd=/usr/bin/file
       lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
       ;;
     esac
   else
     lt_cv_deplibs_check_method=pass_all
   fi
   ;;
 
 gnu*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
 haiku*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
 hpux10.20* | hpux11*)
   lt_cv_file_magic_cmd=/usr/bin/file
   case $host_cpu in
   ia64*)
     lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
     lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
     ;;
   hppa*64*)
     [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
     lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
     ;;
   *)
     lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
     lt_cv_file_magic_test_file=/usr/lib/libc.sl
     ;;
   esac
   ;;
 
 interix[[3-9]]*)
   # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
   lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
   ;;
 
 irix5* | irix6* | nonstopux*)
   case $LD in
   *-32|*"-32 ") libmagic=32-bit;;
   *-n32|*"-n32 ") libmagic=N32;;
   *-64|*"-64 ") libmagic=64-bit;;
   *) libmagic=never-match;;
   esac
   lt_cv_deplibs_check_method=pass_all
   ;;
 
 # This must be glibc/ELF.
 linux* | k*bsd*-gnu | kopensolaris*-gnu)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
 netbsd*)
   if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
   else
     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
   fi
   ;;
 
 newos6*)
   lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
   lt_cv_file_magic_cmd=/usr/bin/file
   lt_cv_file_magic_test_file=/usr/lib/libnls.so
   ;;
 
 *nto* | *qnx*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
 openbsd*)
   if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
   else
     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
   fi
   ;;
 
 osf3* | osf4* | osf5*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
 rdos*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
 solaris*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
 sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
 sysv4 | sysv4.3*)
   case $host_vendor in
   motorola)
     lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
     lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
     ;;
   ncr)
     lt_cv_deplibs_check_method=pass_all
     ;;
   sequent)
     lt_cv_file_magic_cmd='/bin/file'
     lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
     ;;
   sni)
     lt_cv_file_magic_cmd='/bin/file'
     lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
     lt_cv_file_magic_test_file=/lib/libc.so
     ;;
   siemens)
     lt_cv_deplibs_check_method=pass_all
     ;;
   pc)
     lt_cv_deplibs_check_method=pass_all
     ;;
   esac
   ;;
 
 tpf*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 esac
 ])
 
 file_magic_glob=
 want_nocaseglob=no
 if test "$build" = "$host"; then
   case $host_os in
   mingw* | pw32*)
     if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
       want_nocaseglob=yes
     else
       file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
     fi
     ;;
   esac
 fi
 
 file_magic_cmd=$lt_cv_file_magic_cmd
 deplibs_check_method=$lt_cv_deplibs_check_method
 test -z "$deplibs_check_method" && deplibs_check_method=unknown
 
 _LT_DECL([], [deplibs_check_method], [1],
     [Method to check whether dependent libraries are shared objects])
 _LT_DECL([], [file_magic_cmd], [1],
     [Command to use when deplibs_check_method = "file_magic"])
 _LT_DECL([], [file_magic_glob], [1],
     [How to find potential files when deplibs_check_method = "file_magic"])
 _LT_DECL([], [want_nocaseglob], [1],
     [Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
 ])# _LT_CHECK_MAGIC_METHOD
 
 
 # LT_PATH_NM
 # ----------
 # find the pathname to a BSD- or MS-compatible name lister
 AC_DEFUN([LT_PATH_NM],
 [AC_REQUIRE([AC_PROG_CC])dnl
 AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
 [if test -n "$NM"; then
   # Let the user override the test.
   lt_cv_path_NM="$NM"
 else
   lt_nm_to_check="${ac_tool_prefix}nm"
   if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
     lt_nm_to_check="$lt_nm_to_check nm"
   fi
   for lt_tmp_nm in $lt_nm_to_check; do
     lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
     for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
       IFS="$lt_save_ifs"
       test -z "$ac_dir" && ac_dir=.
       tmp_nm="$ac_dir/$lt_tmp_nm"
       if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
 	# Check to see if the nm accepts a BSD-compat flag.
 	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
 	#   nm: unknown option "B" ignored
 	# Tru64's nm complains that /dev/null is an invalid object file
 	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
 	*/dev/null* | *'Invalid file or object type'*)
 	  lt_cv_path_NM="$tmp_nm -B"
 	  break
 	  ;;
 	*)
 	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
 	  */dev/null*)
 	    lt_cv_path_NM="$tmp_nm -p"
 	    break
 	    ;;
 	  *)
 	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
 	    continue # so that we can try to find one that supports BSD flags
 	    ;;
 	  esac
 	  ;;
 	esac
       fi
     done
     IFS="$lt_save_ifs"
   done
   : ${lt_cv_path_NM=no}
 fi])
 if test "$lt_cv_path_NM" != "no"; then
   NM="$lt_cv_path_NM"
 else
   # Didn't find any BSD compatible name lister, look for dumpbin.
   if test -n "$DUMPBIN"; then :
     # Let the user override the test.
   else
     AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
     case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
     *COFF*)
       DUMPBIN="$DUMPBIN -symbols"
       ;;
     *)
       DUMPBIN=:
       ;;
     esac
   fi
   AC_SUBST([DUMPBIN])
   if test "$DUMPBIN" != ":"; then
     NM="$DUMPBIN"
   fi
 fi
 test -z "$NM" && NM=nm
 AC_SUBST([NM])
 _LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
 
 AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
   [lt_cv_nm_interface="BSD nm"
   echo "int some_variable = 0;" > conftest.$ac_ext
   (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
   (eval "$ac_compile" 2>conftest.err)
   cat conftest.err >&AS_MESSAGE_LOG_FD
   (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
   (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
   cat conftest.err >&AS_MESSAGE_LOG_FD
   (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
   cat conftest.out >&AS_MESSAGE_LOG_FD
   if $GREP 'External.*some_variable' conftest.out > /dev/null; then
     lt_cv_nm_interface="MS dumpbin"
   fi
   rm -f conftest*])
 ])# LT_PATH_NM
 
 # Old names:
 AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
 AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
 dnl aclocal-1.4 backwards compatibility:
 dnl AC_DEFUN([AM_PROG_NM], [])
 dnl AC_DEFUN([AC_PROG_NM], [])
 
 # _LT_CHECK_SHAREDLIB_FROM_LINKLIB
 # --------------------------------
 # how to determine the name of the shared library
 # associated with a specific link library.
 #  -- PORTME fill in with the dynamic library characteristics
 m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
 [m4_require([_LT_DECL_EGREP])
 m4_require([_LT_DECL_OBJDUMP])
 m4_require([_LT_DECL_DLLTOOL])
 AC_CACHE_CHECK([how to associate runtime and link libraries],
 lt_cv_sharedlib_from_linklib_cmd,
 [lt_cv_sharedlib_from_linklib_cmd='unknown'
 
 case $host_os in
 cygwin* | mingw* | pw32* | cegcc*)
   # two different shell functions defined in ltmain.sh
   # decide which to use based on capabilities of $DLLTOOL
   case `$DLLTOOL --help 2>&1` in
   *--identify-strict*)
     lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
     ;;
   *)
     lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
     ;;
   esac
   ;;
 *)
   # fallback: assume linklib IS sharedlib
   lt_cv_sharedlib_from_linklib_cmd="$ECHO"
   ;;
 esac
 ])
 sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
 test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
 
 _LT_DECL([], [sharedlib_from_linklib_cmd], [1],
     [Command to associate shared and link libraries])
 ])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
 
 
 # _LT_PATH_MANIFEST_TOOL
 # ----------------------
 # locate the manifest tool
 m4_defun([_LT_PATH_MANIFEST_TOOL],
 [AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
 test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
 AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
   [lt_cv_path_mainfest_tool=no
   echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
   $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
   cat conftest.err >&AS_MESSAGE_LOG_FD
   if $GREP 'Manifest Tool' conftest.out > /dev/null; then
     lt_cv_path_mainfest_tool=yes
   fi
   rm -f conftest*])
 if test "x$lt_cv_path_mainfest_tool" != xyes; then
   MANIFEST_TOOL=:
 fi
 _LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
 ])# _LT_PATH_MANIFEST_TOOL
 
 
 # LT_LIB_M
 # --------
 # check for math library
 AC_DEFUN([LT_LIB_M],
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
 LIBM=
 case $host in
 *-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
   # These system don't have libm, or don't need it
   ;;
 *-ncr-sysv4.3*)
   AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
   AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
   ;;
 *)
   AC_CHECK_LIB(m, cos, LIBM="-lm")
   ;;
 esac
 AC_SUBST([LIBM])
 ])# LT_LIB_M
 
 # Old name:
 AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
 dnl aclocal-1.4 backwards compatibility:
 dnl AC_DEFUN([AC_CHECK_LIBM], [])
 
 
 # _LT_COMPILER_NO_RTTI([TAGNAME])
 # -------------------------------
 m4_defun([_LT_COMPILER_NO_RTTI],
 [m4_require([_LT_TAG_COMPILER])dnl
 
 _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
 
 if test "$GCC" = yes; then
   case $cc_basename in
   nvcc*)
     _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
   *)
     _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
   esac
 
   _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
     lt_cv_prog_compiler_rtti_exceptions,
     [-fno-rtti -fno-exceptions], [],
     [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
 fi
 _LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
 	[Compiler flag to turn off builtin functions])
 ])# _LT_COMPILER_NO_RTTI
 
 
 # _LT_CMD_GLOBAL_SYMBOLS
 # ----------------------
 m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
 AC_REQUIRE([AC_PROG_CC])dnl
 AC_REQUIRE([AC_PROG_AWK])dnl
 AC_REQUIRE([LT_PATH_NM])dnl
 AC_REQUIRE([LT_PATH_LD])dnl
 m4_require([_LT_DECL_SED])dnl
 m4_require([_LT_DECL_EGREP])dnl
 m4_require([_LT_TAG_COMPILER])dnl
 
 # Check for command to grab the raw symbol name followed by C symbol from nm.
 AC_MSG_CHECKING([command to parse $NM output from $compiler object])
 AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
 [
 # These are sane defaults that work on at least a few old systems.
 # [They come from Ultrix.  What could be older than Ultrix?!! ;)]
 
 # Character class describing NM global symbol codes.
 symcode='[[BCDEGRST]]'
 
 # Regexp to match symbols that can be accessed directly from C.
 sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
 
 # Define system-specific variables.
 case $host_os in
 aix*)
   symcode='[[BCDT]]'
   ;;
 cygwin* | mingw* | pw32* | cegcc*)
   symcode='[[ABCDGISTW]]'
   ;;
 hpux*)
   if test "$host_cpu" = ia64; then
     symcode='[[ABCDEGRST]]'
   fi
   ;;
 irix* | nonstopux*)
   symcode='[[BCDEGRST]]'
   ;;
 osf*)
   symcode='[[BCDEGQRST]]'
   ;;
 solaris*)
   symcode='[[BDRT]]'
   ;;
 sco3.2v5*)
   symcode='[[DT]]'
   ;;
 sysv4.2uw2*)
   symcode='[[DT]]'
   ;;
 sysv5* | sco5v6* | unixware* | OpenUNIX*)
   symcode='[[ABDT]]'
   ;;
 sysv4)
   symcode='[[DFNSTU]]'
   ;;
 esac
 
 # If we're using GNU nm, then use its standard symbol codes.
 case `$NM -V 2>&1` in
 *GNU* | *'with BFD'*)
   symcode='[[ABCDGIRSTW]]' ;;
 esac
 
 # Transform an extracted symbol line into a proper C declaration.
 # Some systems (esp. on ia64) link data and code symbols differently,
 # so use this general approach.
 lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
 
 # Transform an extracted symbol line into symbol name and symbol address
 lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p'"
 lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
 
 # Handle CRLF in mingw tool chain
 opt_cr=
 case $build_os in
 mingw*)
   opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
   ;;
 esac
 
 # Try without a prefix underscore, then with it.
 for ac_symprfx in "" "_"; do
 
   # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
   symxfrm="\\1 $ac_symprfx\\2 \\2"
 
   # Write the raw and C identifiers.
   if test "$lt_cv_nm_interface" = "MS dumpbin"; then
     # Fake it for dumpbin and say T for any non-static function
     # and D for any global variable.
     # Also find C++ and __fastcall symbols from MSVC++,
     # which start with @ or ?.
     lt_cv_sys_global_symbol_pipe="$AWK ['"\
 "     {last_section=section; section=\$ 3};"\
 "     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
 "     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
 "     \$ 0!~/External *\|/{next};"\
 "     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
 "     {if(hide[section]) next};"\
 "     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
 "     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
 "     s[1]~/^[@?]/{print s[1], s[1]; next};"\
 "     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
 "     ' prfx=^$ac_symprfx]"
   else
     lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[	 ]]\($symcode$symcode*\)[[	 ]][[	 ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
   fi
   lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
 
   # Check to see that the pipe works correctly.
   pipe_works=no
 
   rm -f conftest*
   cat > conftest.$ac_ext <<_LT_EOF
 #ifdef __cplusplus
 extern "C" {
 #endif
 char nm_test_var;
 void nm_test_func(void);
 void nm_test_func(void){}
 #ifdef __cplusplus
 }
 #endif
 int main(){nm_test_var='a';nm_test_func();return(0);}
 _LT_EOF
 
   if AC_TRY_EVAL(ac_compile); then
     # Now try to grab the symbols.
     nlist=conftest.nm
     if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
       # Try sorting and uniquifying the output.
       if sort "$nlist" | uniq > "$nlist"T; then
 	mv -f "$nlist"T "$nlist"
       else
 	rm -f "$nlist"T
       fi
 
       # Make sure that we snagged all the symbols we need.
       if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
 	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
 	  cat <<_LT_EOF > conftest.$ac_ext
 /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
 #if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
 /* DATA imports from DLLs on WIN32 con't be const, because runtime
    relocations are performed -- see ld's documentation on pseudo-relocs.  */
 # define LT@&t@_DLSYM_CONST
 #elif defined(__osf__)
 /* This system does not cope well with relocations in const data.  */
 # define LT@&t@_DLSYM_CONST
 #else
 # define LT@&t@_DLSYM_CONST const
 #endif
 
 #ifdef __cplusplus
 extern "C" {
 #endif
 
 _LT_EOF
 	  # Now generate the symbol file.
 	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
 
 	  cat <<_LT_EOF >> conftest.$ac_ext
 
 /* The mapping between symbol names and symbols.  */
 LT@&t@_DLSYM_CONST struct {
   const char *name;
   void       *address;
 }
 lt__PROGRAM__LTX_preloaded_symbols[[]] =
 {
   { "@PROGRAM@", (void *) 0 },
 _LT_EOF
 	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
 	  cat <<\_LT_EOF >> conftest.$ac_ext
   {0, (void *) 0}
 };
 
 /* This works around a problem in FreeBSD linker */
 #ifdef FREEBSD_WORKAROUND
 static const void *lt_preloaded_setup() {
   return lt__PROGRAM__LTX_preloaded_symbols;
 }
 #endif
 
 #ifdef __cplusplus
 }
 #endif
 _LT_EOF
 	  # Now try linking the two files.
 	  mv conftest.$ac_objext conftstm.$ac_objext
 	  lt_globsym_save_LIBS=$LIBS
 	  lt_globsym_save_CFLAGS=$CFLAGS
 	  LIBS="conftstm.$ac_objext"
 	  CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
 	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
 	    pipe_works=yes
 	  fi
 	  LIBS=$lt_globsym_save_LIBS
 	  CFLAGS=$lt_globsym_save_CFLAGS
 	else
 	  echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
 	fi
       else
 	echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
       fi
     else
       echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
     fi
   else
     echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
     cat conftest.$ac_ext >&5
   fi
   rm -rf conftest* conftst*
 
   # Do not use the global_symbol_pipe unless it works.
   if test "$pipe_works" = yes; then
     break
   else
     lt_cv_sys_global_symbol_pipe=
   fi
 done
 ])
 if test -z "$lt_cv_sys_global_symbol_pipe"; then
   lt_cv_sys_global_symbol_to_cdecl=
 fi
 if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
   AC_MSG_RESULT(failed)
 else
   AC_MSG_RESULT(ok)
 fi
 
 # Response file support.
 if test "$lt_cv_nm_interface" = "MS dumpbin"; then
   nm_file_list_spec='@'
 elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
   nm_file_list_spec='@'
 fi
 
 _LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
     [Take the output of nm and produce a listing of raw symbols and C names])
 _LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
     [Transform the output of nm in a proper C declaration])
 _LT_DECL([global_symbol_to_c_name_address],
     [lt_cv_sys_global_symbol_to_c_name_address], [1],
     [Transform the output of nm in a C name address pair])
 _LT_DECL([global_symbol_to_c_name_address_lib_prefix],
     [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
     [Transform the output of nm in a C name address pair when lib prefix is needed])
 _LT_DECL([], [nm_file_list_spec], [1],
     [Specify filename containing input files for $NM])
 ]) # _LT_CMD_GLOBAL_SYMBOLS
 
 
 # _LT_COMPILER_PIC([TAGNAME])
 # ---------------------------
 m4_defun([_LT_COMPILER_PIC],
 [m4_require([_LT_TAG_COMPILER])dnl
 _LT_TAGVAR(lt_prog_compiler_wl, $1)=
 _LT_TAGVAR(lt_prog_compiler_pic, $1)=
 _LT_TAGVAR(lt_prog_compiler_static, $1)=
 
 m4_if([$1], [CXX], [
   # C++ specific cases for pic, static, wl, etc.
   if test "$GXX" = yes; then
     _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
     _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
 
     case $host_os in
     aix*)
       # All AIX code is PIC.
       if test "$host_cpu" = ia64; then
 	# AIX 5 now supports IA64 processor
 	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       fi
       ;;
 
     amigaos*)
       case $host_cpu in
       powerpc)
             # see comment about AmigaOS4 .so support
             _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
         ;;
       m68k)
             # FIXME: we need at least 68020 code to build shared libraries, but
             # adding the `-m68020' flag to GCC prevents building anything better,
             # like `-m68040'.
             _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
         ;;
       esac
       ;;
 
     beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
       # PIC is the default for these OSes.
       ;;
     mingw* | cygwin* | os2* | pw32* | cegcc*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
       # Although the cygwin gcc ignores -fPIC, still need this for old-style
       # (--disable-auto-import) libraries
       m4_if([$1], [GCJ], [],
 	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
       ;;
     darwin* | rhapsody*)
       # PIC is the default on this platform
       # Common symbols not allowed in MH_DYLIB files
       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
       ;;
     *djgpp*)
       # DJGPP does not support shared libraries at all
       _LT_TAGVAR(lt_prog_compiler_pic, $1)=
       ;;
     haiku*)
       # PIC is the default for Haiku.
       # The "-static" flag exists, but is broken.
       _LT_TAGVAR(lt_prog_compiler_static, $1)=
       ;;
     interix[[3-9]]*)
       # Interix 3.x gcc -fpic/-fPIC options generate broken code.
       # Instead, we relocate shared libraries at runtime.
       ;;
     sysv4*MP*)
       if test -d /usr/nec; then
 	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
       fi
       ;;
     hpux*)
       # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
       # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
       # sets the default TLS model and affects inlining.
       case $host_cpu in
       hppa*64*)
 	;;
       *)
 	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
 	;;
       esac
       ;;
     *qnx* | *nto*)
       # QNX uses GNU C++, but need to define -shared option too, otherwise
       # it will coredump.
       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
       ;;
     *)
       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
       ;;
     esac
   else
     case $host_os in
       aix[[4-9]]*)
 	# All AIX code is PIC.
 	if test "$host_cpu" = ia64; then
 	  # AIX 5 now supports IA64 processor
 	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
 	else
 	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
 	fi
 	;;
       chorus*)
 	case $cc_basename in
 	cxch68*)
 	  # Green Hills C++ Compiler
 	  # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
 	  ;;
 	esac
 	;;
       mingw* | cygwin* | os2* | pw32* | cegcc*)
 	# This hack is so that the source file can tell whether it is being
 	# built for inclusion in a dll (and should export symbols for example).
 	m4_if([$1], [GCJ], [],
 	  [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
 	;;
       dgux*)
 	case $cc_basename in
 	  ec++*)
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	    ;;
 	  ghcx*)
 	    # Green Hills C++ Compiler
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
 	    ;;
 	  *)
 	    ;;
 	esac
 	;;
       freebsd* | dragonfly*)
 	# FreeBSD uses GNU C++
 	;;
       hpux9* | hpux10* | hpux11*)
 	case $cc_basename in
 	  CC*)
 	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
 	    if test "$host_cpu" != ia64; then
 	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
 	    fi
 	    ;;
 	  aCC*)
 	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
 	    case $host_cpu in
 	    hppa*64*|ia64*)
 	      # +Z the default
 	      ;;
 	    *)
 	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
 	      ;;
 	    esac
 	    ;;
 	  *)
 	    ;;
 	esac
 	;;
       interix*)
 	# This is c89, which is MS Visual C++ (no shared libs)
 	# Anyone wants to do a port?
 	;;
       irix5* | irix6* | nonstopux*)
 	case $cc_basename in
 	  CC*)
 	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
 	    # CC pic flag -KPIC is the default.
 	    ;;
 	  *)
 	    ;;
 	esac
 	;;
       linux* | k*bsd*-gnu | kopensolaris*-gnu)
 	case $cc_basename in
 	  KCC*)
 	    # KAI C++ Compiler
 	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
 	    ;;
 	  ecpc* )
 	    # old Intel C++ for x86_64 which still supported -KPIC.
 	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
 	    ;;
 	  icpc* )
 	    # Intel C++, used to be incompatible with GCC.
 	    # ICC 10 doesn't accept -KPIC any more.
 	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
 	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
 	    ;;
 	  pgCC* | pgcpp*)
 	    # Portland Group C++ compiler
 	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
 	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
 	    ;;
 	  cxx*)
 	    # Compaq C++
 	    # Make sure the PIC flag is empty.  It appears that all Alpha
 	    # Linux and Compaq Tru64 Unix objects are PIC.
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
 	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
 	    ;;
 	  xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
 	    # IBM XL 8.0, 9.0 on PPC and BlueGene
 	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
 	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
 	    ;;
 	  *)
 	    case `$CC -V 2>&1 | sed 5q` in
 	    *Sun\ C*)
 	      # Sun C++ 5.9
 	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
 	      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
 	      ;;
 	    esac
 	    ;;
 	esac
 	;;
       lynxos*)
 	;;
       m88k*)
 	;;
       mvs*)
 	case $cc_basename in
 	  cxx*)
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
 	    ;;
 	  *)
 	    ;;
 	esac
 	;;
       netbsd*)
 	;;
       *qnx* | *nto*)
         # QNX uses GNU C++, but need to define -shared option too, otherwise
         # it will coredump.
         _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
         ;;
       osf3* | osf4* | osf5*)
 	case $cc_basename in
 	  KCC*)
 	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
 	    ;;
 	  RCC*)
 	    # Rational C++ 2.4.1
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
 	    ;;
 	  cxx*)
 	    # Digital/Compaq C++
 	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	    # Make sure the PIC flag is empty.  It appears that all Alpha
 	    # Linux and Compaq Tru64 Unix objects are PIC.
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
 	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
 	    ;;
 	  *)
 	    ;;
 	esac
 	;;
       psos*)
 	;;
       solaris*)
 	case $cc_basename in
 	  CC* | sunCC*)
 	    # Sun C++ 4.2, 5.x and Centerline C++
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
 	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
 	    ;;
 	  gcx*)
 	    # Green Hills C++ Compiler
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
 	    ;;
 	  *)
 	    ;;
 	esac
 	;;
       sunos4*)
 	case $cc_basename in
 	  CC*)
 	    # Sun C++ 4.x
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
 	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
 	    ;;
 	  lcc*)
 	    # Lucid
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
 	    ;;
 	  *)
 	    ;;
 	esac
 	;;
       sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
 	case $cc_basename in
 	  CC*)
 	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
 	    ;;
 	esac
 	;;
       tandem*)
 	case $cc_basename in
 	  NCC*)
 	    # NonStop-UX NCC 3.20
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	    ;;
 	  *)
 	    ;;
 	esac
 	;;
       vxworks*)
 	;;
       *)
 	_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
 	;;
     esac
   fi
 ],
 [
   if test "$GCC" = yes; then
     _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
     _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
 
     case $host_os in
       aix*)
       # All AIX code is PIC.
       if test "$host_cpu" = ia64; then
 	# AIX 5 now supports IA64 processor
 	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       fi
       ;;
 
     amigaos*)
       case $host_cpu in
       powerpc)
             # see comment about AmigaOS4 .so support
             _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
         ;;
       m68k)
             # FIXME: we need at least 68020 code to build shared libraries, but
             # adding the `-m68020' flag to GCC prevents building anything better,
             # like `-m68040'.
             _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
         ;;
       esac
       ;;
 
     beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
       # PIC is the default for these OSes.
       ;;
 
     mingw* | cygwin* | pw32* | os2* | cegcc*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
       # Although the cygwin gcc ignores -fPIC, still need this for old-style
       # (--disable-auto-import) libraries
       m4_if([$1], [GCJ], [],
 	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
       ;;
 
     darwin* | rhapsody*)
       # PIC is the default on this platform
       # Common symbols not allowed in MH_DYLIB files
       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
       ;;
 
     haiku*)
       # PIC is the default for Haiku.
       # The "-static" flag exists, but is broken.
       _LT_TAGVAR(lt_prog_compiler_static, $1)=
       ;;
 
     hpux*)
       # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
       # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
       # sets the default TLS model and affects inlining.
       case $host_cpu in
       hppa*64*)
 	# +Z the default
 	;;
       *)
 	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
 	;;
       esac
       ;;
 
     interix[[3-9]]*)
       # Interix 3.x gcc -fpic/-fPIC options generate broken code.
       # Instead, we relocate shared libraries at runtime.
       ;;
 
     msdosdjgpp*)
       # Just because we use GCC doesn't mean we suddenly get shared libraries
       # on systems that don't support them.
       _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
       enable_shared=no
       ;;
 
     *nto* | *qnx*)
       # QNX uses GNU C++, but need to define -shared option too, otherwise
       # it will coredump.
       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
       ;;
 
     sysv4*MP*)
       if test -d /usr/nec; then
 	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
       fi
       ;;
 
     *)
       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
       ;;
     esac
 
     case $cc_basename in
     nvcc*) # Cuda Compiler Driver 2.2
       _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
       if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
         _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)"
       fi
       ;;
     esac
   else
     # PORTME Check for flag to pass linker flags through the system compiler.
     case $host_os in
     aix*)
       _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
       if test "$host_cpu" = ia64; then
 	# AIX 5 now supports IA64 processor
 	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       else
 	_LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
       fi
       ;;
 
     mingw* | cygwin* | pw32* | os2* | cegcc*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
       m4_if([$1], [GCJ], [],
 	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
       ;;
 
     hpux9* | hpux10* | hpux11*)
       _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
       # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
       # not for PA HP-UX.
       case $host_cpu in
       hppa*64*|ia64*)
 	# +Z the default
 	;;
       *)
 	_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
 	;;
       esac
       # Is there a better lt_prog_compiler_static that works with the bundled CC?
       _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
       ;;
 
     irix5* | irix6* | nonstopux*)
       _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
       # PIC (with -KPIC) is the default.
       _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
       ;;
 
     linux* | k*bsd*-gnu | kopensolaris*-gnu)
       case $cc_basename in
       # old Intel for x86_64 which still supported -KPIC.
       ecc*)
 	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
         ;;
       # icc used to be incompatible with GCC.
       # ICC 10 doesn't accept -KPIC any more.
       icc* | ifort*)
 	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
 	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
         ;;
       # Lahey Fortran 8.1.
       lf95*)
 	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	_LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
 	_LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
 	;;
       nagfor*)
 	# NAG Fortran compiler
 	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
 	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
 	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
 	;;
       pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
         # Portland Group compilers (*not* the Pentium gcc compiler,
 	# which looks to be a dead project)
 	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
 	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
         ;;
       ccc*)
         _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
         # All Alpha code is PIC.
         _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
         ;;
       xl* | bgxl* | bgf* | mpixl*)
 	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
 	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
 	_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
 	;;
       *)
 	case `$CC -V 2>&1 | sed 5q` in
 	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*)
 	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
 	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
 	  _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
 	  ;;
 	*Sun\ F* | *Sun*Fortran*)
 	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
 	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
 	  ;;
 	*Sun\ C*)
 	  # Sun C 5.9
 	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
 	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	  ;;
         *Intel*\ [[CF]]*Compiler*)
 	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
 	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
 	  ;;
 	*Portland\ Group*)
 	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
 	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
 	  ;;
 	esac
 	;;
       esac
       ;;
 
     newsos6)
       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
       _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       ;;
 
     *nto* | *qnx*)
       # QNX uses GNU C++, but need to define -shared option too, otherwise
       # it will coredump.
       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
       ;;
 
     osf3* | osf4* | osf5*)
       _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
       # All OSF/1 code is PIC.
       _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
       ;;
 
     rdos*)
       _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
       ;;
 
     solaris*)
       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
       _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       case $cc_basename in
       f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
 	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
       *)
 	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
       esac
       ;;
 
     sunos4*)
       _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
       _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       ;;
 
     sysv4 | sysv4.2uw2* | sysv4.3*)
       _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
       _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       ;;
 
     sysv4*MP*)
       if test -d /usr/nec ;then
 	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
 	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       fi
       ;;
 
     sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
       _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
       _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       ;;
 
     unicos*)
       _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
       _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
       ;;
 
     uts4*)
       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
       _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       ;;
 
     *)
       _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
       ;;
     esac
   fi
 ])
 case $host_os in
   # For platforms which do not support PIC, -DPIC is meaningless:
   *djgpp*)
     _LT_TAGVAR(lt_prog_compiler_pic, $1)=
     ;;
   *)
     _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
     ;;
 esac
 
 AC_CACHE_CHECK([for $compiler option to produce PIC],
   [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
   [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
 _LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
 
 #
 # Check to make sure the PIC flag actually works.
 #
 if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
   _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
     [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
     [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
     [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
      "" | " "*) ;;
      *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
      esac],
     [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
 fi
 _LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
 	[Additional compiler flags for building library objects])
 
 _LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
 	[How to pass a linker flag through the compiler])
 #
 # Check to make sure the static flag actually works.
 #
 wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
 _LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
   _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
   $lt_tmp_static_flag,
   [],
   [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
 _LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
 	[Compiler flag to prevent dynamic linking])
 ])# _LT_COMPILER_PIC
 
 
 # _LT_LINKER_SHLIBS([TAGNAME])
 # ----------------------------
 # See if the linker supports building shared libraries.
 m4_defun([_LT_LINKER_SHLIBS],
 [AC_REQUIRE([LT_PATH_LD])dnl
 AC_REQUIRE([LT_PATH_NM])dnl
 m4_require([_LT_PATH_MANIFEST_TOOL])dnl
 m4_require([_LT_FILEUTILS_DEFAULTS])dnl
 m4_require([_LT_DECL_EGREP])dnl
 m4_require([_LT_DECL_SED])dnl
 m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
 m4_require([_LT_TAG_COMPILER])dnl
 AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
 m4_if([$1], [CXX], [
   _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
   _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
   case $host_os in
   aix[[4-9]]*)
     # If we're using GNU nm, then we don't want the "-C" option.
     # -C means demangle to AIX nm, but means don't demangle with GNU nm
     # Also, AIX nm treats weak defined symbols like other global defined
     # symbols, whereas GNU nm marks them as "W".
     if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
       _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
     else
       _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
     fi
     ;;
   pw32*)
     _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
     ;;
   cygwin* | mingw* | cegcc*)
     case $cc_basename in
     cl*)
       _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
       ;;
     *)
       _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
       _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
       ;;
     esac
     ;;
   *)
     _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
     ;;
   esac
 ], [
   runpath_var=
   _LT_TAGVAR(allow_undefined_flag, $1)=
   _LT_TAGVAR(always_export_symbols, $1)=no
   _LT_TAGVAR(archive_cmds, $1)=
   _LT_TAGVAR(archive_expsym_cmds, $1)=
   _LT_TAGVAR(compiler_needs_object, $1)=no
   _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
   _LT_TAGVAR(export_dynamic_flag_spec, $1)=
   _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
   _LT_TAGVAR(hardcode_automatic, $1)=no
   _LT_TAGVAR(hardcode_direct, $1)=no
   _LT_TAGVAR(hardcode_direct_absolute, $1)=no
   _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
   _LT_TAGVAR(hardcode_libdir_separator, $1)=
   _LT_TAGVAR(hardcode_minus_L, $1)=no
   _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
   _LT_TAGVAR(inherit_rpath, $1)=no
   _LT_TAGVAR(link_all_deplibs, $1)=unknown
   _LT_TAGVAR(module_cmds, $1)=
   _LT_TAGVAR(module_expsym_cmds, $1)=
   _LT_TAGVAR(old_archive_from_new_cmds, $1)=
   _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
   _LT_TAGVAR(thread_safe_flag_spec, $1)=
   _LT_TAGVAR(whole_archive_flag_spec, $1)=
   # include_expsyms should be a list of space-separated symbols to be *always*
   # included in the symbol list
   _LT_TAGVAR(include_expsyms, $1)=
   # exclude_expsyms can be an extended regexp of symbols to exclude
   # it will be wrapped by ` (' and `)$', so one must not match beginning or
   # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
   # as well as any symbol that contains `d'.
   _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
   # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
   # platforms (ab)use it in PIC code, but their linkers get confused if
   # the symbol is explicitly referenced.  Since portable code cannot
   # rely on this symbol name, it's probably fine to never include it in
   # preloaded symbol tables.
   # Exclude shared library initialization/finalization symbols.
 dnl Note also adjust exclude_expsyms for C++ above.
   extract_expsyms_cmds=
 
   case $host_os in
   cygwin* | mingw* | pw32* | cegcc*)
     # FIXME: the MSVC++ port hasn't been tested in a loooong time
     # When not using gcc, we currently assume that we are using
     # Microsoft Visual C++.
     if test "$GCC" != yes; then
       with_gnu_ld=no
     fi
     ;;
   interix*)
     # we just hope/assume this is gcc and not c89 (= MSVC++)
     with_gnu_ld=yes
     ;;
   openbsd*)
     with_gnu_ld=no
     ;;
   esac
 
   _LT_TAGVAR(ld_shlibs, $1)=yes
 
   # On some targets, GNU ld is compatible enough with the native linker
   # that we're better off using the native interface for both.
   lt_use_gnu_ld_interface=no
   if test "$with_gnu_ld" = yes; then
     case $host_os in
       aix*)
 	# The AIX port of GNU ld has always aspired to compatibility
 	# with the native linker.  However, as the warning in the GNU ld
 	# block says, versions before 2.19.5* couldn't really create working
 	# shared libraries, regardless of the interface used.
 	case `$LD -v 2>&1` in
 	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
 	  *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
 	  *\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
 	  *)
 	    lt_use_gnu_ld_interface=yes
 	    ;;
 	esac
 	;;
       *)
 	lt_use_gnu_ld_interface=yes
 	;;
     esac
   fi
 
   if test "$lt_use_gnu_ld_interface" = yes; then
     # If archive_cmds runs LD, not CC, wlarc should be empty
     wlarc='${wl}'
 
     # Set some defaults for GNU ld with shared library support. These
     # are reset later if shared libraries are not supported. Putting them
     # here allows them to be overridden if necessary.
     runpath_var=LD_RUN_PATH
     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
     _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
     # ancient GNU ld didn't support --whole-archive et. al.
     if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
       _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
     else
       _LT_TAGVAR(whole_archive_flag_spec, $1)=
     fi
     supports_anon_versioning=no
     case `$LD -v 2>&1` in
       *GNU\ gold*) supports_anon_versioning=yes ;;
       *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
       *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
       *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
       *\ 2.11.*) ;; # other 2.11 versions
       *) supports_anon_versioning=yes ;;
     esac
 
     # See if GNU ld supports shared libraries.
     case $host_os in
     aix[[3-9]]*)
       # On AIX/PPC, the GNU linker is very broken
       if test "$host_cpu" != ia64; then
 	_LT_TAGVAR(ld_shlibs, $1)=no
 	cat <<_LT_EOF 1>&2
 
 *** Warning: the GNU linker, at least up to release 2.19, is reported
 *** to be unable to reliably create shared libraries on AIX.
 *** Therefore, libtool is disabling shared libraries support.  If you
 *** really care for shared libraries, you may want to install binutils
 *** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
 *** You will then need to restart the configuration process.
 
 _LT_EOF
       fi
       ;;
 
     amigaos*)
       case $host_cpu in
       powerpc)
             # see comment about AmigaOS4 .so support
             _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
             _LT_TAGVAR(archive_expsym_cmds, $1)=''
         ;;
       m68k)
             _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
             _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
             _LT_TAGVAR(hardcode_minus_L, $1)=yes
         ;;
       esac
       ;;
 
     beos*)
       if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
 	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
 	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
 	# support --undefined.  This deserves some investigation.  FIXME
 	_LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
       else
 	_LT_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
 
     cygwin* | mingw* | pw32* | cegcc*)
       # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
       # as there is no search path for DLLs.
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
       _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
       _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
       _LT_TAGVAR(always_export_symbols, $1)=no
       _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
       _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
       _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
 
       if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
         _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
 	# If the export-symbols file already is a .def file (1st line
 	# is EXPORTS), use it as is; otherwise, prepend...
 	_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
 	  cp $export_symbols $output_objdir/$soname.def;
 	else
 	  echo EXPORTS > $output_objdir/$soname.def;
 	  cat $export_symbols >> $output_objdir/$soname.def;
 	fi~
 	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
       else
 	_LT_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
 
     haiku*)
       _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
       _LT_TAGVAR(link_all_deplibs, $1)=yes
       ;;
 
     interix[[3-9]]*)
       _LT_TAGVAR(hardcode_direct, $1)=no
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
       _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
       # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
       # Instead, shared libraries are loaded at an image base (0x10000000 by
       # default) and relocated if they conflict, which is a slow very memory
       # consuming and fragmenting process.  To avoid this, we pick a random,
       # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
       # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
       _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
       _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
       ;;
 
     gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
       tmp_diet=no
       if test "$host_os" = linux-dietlibc; then
 	case $cc_basename in
 	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
 	esac
       fi
       if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
 	 && test "$tmp_diet" = no
       then
 	tmp_addflag=' $pic_flag'
 	tmp_sharedflag='-shared'
 	case $cc_basename,$host_cpu in
         pgcc*)				# Portland Group C compiler
 	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
 	  tmp_addflag=' $pic_flag'
 	  ;;
 	pgf77* | pgf90* | pgf95* | pgfortran*)
 					# Portland Group f77 and f90 compilers
 	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
 	  tmp_addflag=' $pic_flag -Mnomain' ;;
 	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
 	  tmp_addflag=' -i_dynamic' ;;
 	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
 	  tmp_addflag=' -i_dynamic -nofor_main' ;;
 	ifc* | ifort*)			# Intel Fortran compiler
 	  tmp_addflag=' -nofor_main' ;;
 	lf95*)				# Lahey Fortran 8.1
 	  _LT_TAGVAR(whole_archive_flag_spec, $1)=
 	  tmp_sharedflag='--shared' ;;
 	xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
 	  tmp_sharedflag='-qmkshrobj'
 	  tmp_addflag= ;;
 	nvcc*)	# Cuda Compiler Driver 2.2
 	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
 	  _LT_TAGVAR(compiler_needs_object, $1)=yes
 	  ;;
 	esac
 	case `$CC -V 2>&1 | sed 5q` in
 	*Sun\ C*)			# Sun C 5.9
 	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
 	  _LT_TAGVAR(compiler_needs_object, $1)=yes
 	  tmp_sharedflag='-G' ;;
 	*Sun\ F*)			# Sun Fortran 8.3
 	  tmp_sharedflag='-G' ;;
 	esac
 	_LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 
         if test "x$supports_anon_versioning" = xyes; then
           _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
 	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
 	    echo "local: *; };" >> $output_objdir/$libname.ver~
 	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
         fi
 
 	case $cc_basename in
 	xlf* | bgf* | bgxlf* | mpixlf*)
 	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
 	  _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
 	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
 	  _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
 	  if test "x$supports_anon_versioning" = xyes; then
 	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
 	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
 	      echo "local: *; };" >> $output_objdir/$libname.ver~
 	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
 	  fi
 	  ;;
 	esac
       else
         _LT_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
 
     netbsd*)
       if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
 	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
 	wlarc=
       else
 	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       fi
       ;;
 
     solaris*)
       if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
 	_LT_TAGVAR(ld_shlibs, $1)=no
 	cat <<_LT_EOF 1>&2
 
 *** Warning: The releases 2.8.* of the GNU linker cannot reliably
 *** create shared libraries on Solaris systems.  Therefore, libtool
 *** is disabling shared libraries support.  We urge you to upgrade GNU
 *** binutils to release 2.9.1 or newer.  Another option is to modify
 *** your PATH or compiler configuration so that the native linker is
 *** used, and then restart.
 
 _LT_EOF
       elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
 	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       else
 	_LT_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
 
     sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
       case `$LD -v 2>&1` in
         *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
 	_LT_TAGVAR(ld_shlibs, $1)=no
 	cat <<_LT_EOF 1>&2
 
 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
 *** reliably create shared libraries on SCO systems.  Therefore, libtool
 *** is disabling shared libraries support.  We urge you to upgrade GNU
 *** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
 *** your PATH or compiler configuration so that the native linker is
 *** used, and then restart.
 
 _LT_EOF
 	;;
 	*)
 	  # For security reasons, it is highly recommended that you always
 	  # use absolute paths for naming shared libraries, and exclude the
 	  # DT_RUNPATH tag from executables and libraries.  But doing so
 	  # requires that you compile everything twice, which is a pain.
 	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
 	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
 	  else
 	    _LT_TAGVAR(ld_shlibs, $1)=no
 	  fi
 	;;
       esac
       ;;
 
     sunos4*)
       _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
       wlarc=
       _LT_TAGVAR(hardcode_direct, $1)=yes
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     *)
       if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
 	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       else
 	_LT_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
     esac
 
     if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
       runpath_var=
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
       _LT_TAGVAR(export_dynamic_flag_spec, $1)=
       _LT_TAGVAR(whole_archive_flag_spec, $1)=
     fi
   else
     # PORTME fill in a description of your system's linker (not GNU ld)
     case $host_os in
     aix3*)
       _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
       _LT_TAGVAR(always_export_symbols, $1)=yes
       _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
       # Note: this linker hardcodes the directories in LIBPATH if there
       # are no directories specified by -L.
       _LT_TAGVAR(hardcode_minus_L, $1)=yes
       if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
 	# Neither direct hardcoding nor static linking is supported with a
 	# broken collect2.
 	_LT_TAGVAR(hardcode_direct, $1)=unsupported
       fi
       ;;
 
     aix[[4-9]]*)
       if test "$host_cpu" = ia64; then
 	# On IA64, the linker does run time linking by default, so we don't
 	# have to do anything special.
 	aix_use_runtimelinking=no
 	exp_sym_flag='-Bexport'
 	no_entry_flag=""
       else
 	# If we're using GNU nm, then we don't want the "-C" option.
 	# -C means demangle to AIX nm, but means don't demangle with GNU nm
 	# Also, AIX nm treats weak defined symbols like other global
 	# defined symbols, whereas GNU nm marks them as "W".
 	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
 	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
 	else
 	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
 	fi
 	aix_use_runtimelinking=no
 
 	# Test if we are trying to use run time linking or normal
 	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
 	# need to do runtime linking.
 	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
 	  for ld_flag in $LDFLAGS; do
 	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
 	    aix_use_runtimelinking=yes
 	    break
 	  fi
 	  done
 	  ;;
 	esac
 
 	exp_sym_flag='-bexport'
 	no_entry_flag='-bnoentry'
       fi
 
       # When large executables or shared objects are built, AIX ld can
       # have problems creating the table of contents.  If linking a library
       # or program results in "error TOC overflow" add -mminimal-toc to
       # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
       # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
 
       _LT_TAGVAR(archive_cmds, $1)=''
       _LT_TAGVAR(hardcode_direct, $1)=yes
       _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
       _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
       _LT_TAGVAR(link_all_deplibs, $1)=yes
       _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
 
       if test "$GCC" = yes; then
 	case $host_os in aix4.[[012]]|aix4.[[012]].*)
 	# We only want to do this on AIX 4.2 and lower, the check
 	# below for broken collect2 doesn't work under 4.3+
 	  collect2name=`${CC} -print-prog-name=collect2`
 	  if test -f "$collect2name" &&
 	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
 	  then
 	  # We have reworked collect2
 	  :
 	  else
 	  # We have old collect2
 	  _LT_TAGVAR(hardcode_direct, $1)=unsupported
 	  # It fails to find uninstalled libraries when the uninstalled
 	  # path is not listed in the libpath.  Setting hardcode_minus_L
 	  # to unsupported forces relinking
 	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
 	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
 	  _LT_TAGVAR(hardcode_libdir_separator, $1)=
 	  fi
 	  ;;
 	esac
 	shared_flag='-shared'
 	if test "$aix_use_runtimelinking" = yes; then
 	  shared_flag="$shared_flag "'${wl}-G'
 	fi
       else
 	# not using gcc
 	if test "$host_cpu" = ia64; then
 	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
 	# chokes on -Wl,-G. The following line is correct:
 	  shared_flag='-G'
 	else
 	  if test "$aix_use_runtimelinking" = yes; then
 	    shared_flag='${wl}-G'
 	  else
 	    shared_flag='${wl}-bM:SRE'
 	  fi
 	fi
       fi
 
       _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
       # It seems that -bexpall does not export symbols beginning with
       # underscore (_), so it is better to generate a list of symbols to export.
       _LT_TAGVAR(always_export_symbols, $1)=yes
       if test "$aix_use_runtimelinking" = yes; then
 	# Warning - without using the other runtime loading flags (-brtl),
 	# -berok will link without error, but may produce a broken library.
 	_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
         # Determine the default libpath from the value encoded in an
         # empty executable.
         _LT_SYS_MODULE_PATH_AIX([$1])
         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
         _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
       else
 	if test "$host_cpu" = ia64; then
 	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
 	  _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
 	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
 	else
 	 # Determine the default libpath from the value encoded in an
 	 # empty executable.
 	 _LT_SYS_MODULE_PATH_AIX([$1])
 	 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
 	  # Warning - without using the other run time loading flags,
 	  # -berok will link without error, but may produce a broken library.
 	  _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
 	  _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
 	  if test "$with_gnu_ld" = yes; then
 	    # We only use this code for GNU lds that support --whole-archive.
 	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
 	  else
 	    # Exported symbols can be pulled into shared objects from archives
 	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
 	  fi
 	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
 	  # This is similar to how AIX traditionally builds its shared libraries.
 	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
 	fi
       fi
       ;;
 
     amigaos*)
       case $host_cpu in
       powerpc)
             # see comment about AmigaOS4 .so support
             _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
             _LT_TAGVAR(archive_expsym_cmds, $1)=''
         ;;
       m68k)
             _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
             _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
             _LT_TAGVAR(hardcode_minus_L, $1)=yes
         ;;
       esac
       ;;
 
     bsdi[[45]]*)
       _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
       ;;
 
     cygwin* | mingw* | pw32* | cegcc*)
       # When not using gcc, we currently assume that we are using
       # Microsoft Visual C++.
       # hardcode_libdir_flag_spec is actually meaningless, as there is
       # no search path for DLLs.
       case $cc_basename in
       cl*)
 	# Native MSVC
 	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
 	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
 	_LT_TAGVAR(always_export_symbols, $1)=yes
 	_LT_TAGVAR(file_list_spec, $1)='@'
 	# Tell ltmain to make .lib files, not .a files.
 	libext=lib
 	# Tell ltmain to make .dll files, not .so files.
 	shrext_cmds=".dll"
 	# FIXME: Setting linknames here is a bad hack.
 	_LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
 	_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
 	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
 	  else
 	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
 	  fi~
 	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
 	  linknames='
 	# The linker will not automatically build a static lib if we build a DLL.
 	# _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
 	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
 	_LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
 	_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
 	# Don't use ranlib
 	_LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
 	_LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
 	  lt_tool_outputfile="@TOOL_OUTPUT@"~
 	  case $lt_outputfile in
 	    *.exe|*.EXE) ;;
 	    *)
 	      lt_outputfile="$lt_outputfile.exe"
 	      lt_tool_outputfile="$lt_tool_outputfile.exe"
 	      ;;
 	  esac~
 	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
 	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
 	    $RM "$lt_outputfile.manifest";
 	  fi'
 	;;
       *)
 	# Assume MSVC wrapper
 	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
 	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
 	# Tell ltmain to make .lib files, not .a files.
 	libext=lib
 	# Tell ltmain to make .dll files, not .so files.
 	shrext_cmds=".dll"
 	# FIXME: Setting linknames here is a bad hack.
 	_LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
 	# The linker will automatically build a .lib file if we build a DLL.
 	_LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
 	# FIXME: Should let the user specify the lib program.
 	_LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
 	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
 	;;
       esac
       ;;
 
     darwin* | rhapsody*)
       _LT_DARWIN_LINKER_FEATURES($1)
       ;;
 
     dgux*)
       _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
     # support.  Future versions do this automatically, but an explicit c++rt0.o
     # does not break anything, and helps significantly (at the cost of a little
     # extra space).
     freebsd2.2*)
       _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
       _LT_TAGVAR(hardcode_direct, $1)=yes
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     # Unfortunately, older versions of FreeBSD 2 do not have this feature.
     freebsd2.*)
       _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
       _LT_TAGVAR(hardcode_direct, $1)=yes
       _LT_TAGVAR(hardcode_minus_L, $1)=yes
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
     freebsd* | dragonfly*)
       _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
       _LT_TAGVAR(hardcode_direct, $1)=yes
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     hpux9*)
       if test "$GCC" = yes; then
 	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
       else
 	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
       fi
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
       _LT_TAGVAR(hardcode_libdir_separator, $1)=:
       _LT_TAGVAR(hardcode_direct, $1)=yes
 
       # hardcode_minus_L: Not really in the search PATH,
       # but as the default location of the library.
       _LT_TAGVAR(hardcode_minus_L, $1)=yes
       _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
       ;;
 
     hpux10*)
       if test "$GCC" = yes && test "$with_gnu_ld" = no; then
 	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
       else
 	_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
       fi
       if test "$with_gnu_ld" = no; then
 	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
 	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
 	_LT_TAGVAR(hardcode_direct, $1)=yes
 	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
 	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
 	# hardcode_minus_L: Not really in the search PATH,
 	# but as the default location of the library.
 	_LT_TAGVAR(hardcode_minus_L, $1)=yes
       fi
       ;;
 
     hpux11*)
       if test "$GCC" = yes && test "$with_gnu_ld" = no; then
 	case $host_cpu in
 	hppa*64*)
 	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	ia64*)
 	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
 	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       else
 	case $host_cpu in
 	hppa*64*)
 	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	ia64*)
 	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
 	m4_if($1, [], [
 	  # Older versions of the 11.00 compiler do not understand -b yet
 	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
 	  _LT_LINKER_OPTION([if $CC understands -b],
 	    _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
 	    [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
 	    [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
 	  [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
 	  ;;
 	esac
       fi
       if test "$with_gnu_ld" = no; then
 	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
 	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
 
 	case $host_cpu in
 	hppa*64*|ia64*)
 	  _LT_TAGVAR(hardcode_direct, $1)=no
 	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
 	  ;;
 	*)
 	  _LT_TAGVAR(hardcode_direct, $1)=yes
 	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
 	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
 
 	  # hardcode_minus_L: Not really in the search PATH,
 	  # but as the default location of the library.
 	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
 	  ;;
 	esac
       fi
       ;;
 
     irix5* | irix6* | nonstopux*)
       if test "$GCC" = yes; then
 	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 	# Try to use the -exported_symbol ld option, if it does not
 	# work, assume that -exports_file does not work either and
 	# implicitly export all symbols.
 	# This should be the same for all languages, so no per-tag cache variable.
 	AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
 	  [lt_cv_irix_exported_symbol],
 	  [save_LDFLAGS="$LDFLAGS"
 	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
 	   AC_LINK_IFELSE(
 	     [AC_LANG_SOURCE(
 	        [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
 			      [C++], [[int foo (void) { return 0; }]],
 			      [Fortran 77], [[
       subroutine foo
       end]],
 			      [Fortran], [[
       subroutine foo
       end]])])],
 	      [lt_cv_irix_exported_symbol=yes],
 	      [lt_cv_irix_exported_symbol=no])
            LDFLAGS="$save_LDFLAGS"])
 	if test "$lt_cv_irix_exported_symbol" = yes; then
           _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
 	fi
       else
 	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
 	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
       fi
       _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
       _LT_TAGVAR(hardcode_libdir_separator, $1)=:
       _LT_TAGVAR(inherit_rpath, $1)=yes
       _LT_TAGVAR(link_all_deplibs, $1)=yes
       ;;
 
     netbsd*)
       if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
 	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
       else
 	_LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
       fi
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
       _LT_TAGVAR(hardcode_direct, $1)=yes
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     newsos6)
       _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
       _LT_TAGVAR(hardcode_direct, $1)=yes
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
       _LT_TAGVAR(hardcode_libdir_separator, $1)=:
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     *nto* | *qnx*)
       ;;
 
     openbsd*)
       if test -f /usr/libexec/ld.so; then
 	_LT_TAGVAR(hardcode_direct, $1)=yes
 	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
 	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
 	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
 	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
 	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
 	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
 	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
 	else
 	  case $host_os in
 	   openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
 	     _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
 	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
 	     ;;
 	   *)
 	     _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
 	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
 	     ;;
 	  esac
 	fi
       else
 	_LT_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
 
     os2*)
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
       _LT_TAGVAR(hardcode_minus_L, $1)=yes
       _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
       _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
       _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
       ;;
 
     osf3*)
       if test "$GCC" = yes; then
 	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
 	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
       else
 	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
 	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
       fi
       _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
       _LT_TAGVAR(hardcode_libdir_separator, $1)=:
       ;;
 
     osf4* | osf5*)	# as osf3* with the addition of -msym flag
       if test "$GCC" = yes; then
 	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
 	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
       else
 	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
 	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
 	_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
 	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
 
 	# Both c and cxx compiler support -rpath directly
 	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
       fi
       _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
       _LT_TAGVAR(hardcode_libdir_separator, $1)=:
       ;;
 
     solaris*)
       _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
       if test "$GCC" = yes; then
 	wlarc='${wl}'
 	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
 	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
       else
 	case `$CC -V 2>&1` in
 	*"Compilers 5.0"*)
 	  wlarc=''
 	  _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
 	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
 	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
 	  ;;
 	*)
 	  wlarc='${wl}'
 	  _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
 	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
 	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
 	  ;;
 	esac
       fi
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       case $host_os in
       solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
       *)
 	# The compiler driver will combine and reorder linker options,
 	# but understands `-z linker_flag'.  GCC discards it without `$wl',
 	# but is careful enough not to reorder.
 	# Supported since Solaris 2.6 (maybe 2.5.1?)
 	if test "$GCC" = yes; then
 	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
 	else
 	  _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
 	fi
 	;;
       esac
       _LT_TAGVAR(link_all_deplibs, $1)=yes
       ;;
 
     sunos4*)
       if test "x$host_vendor" = xsequent; then
 	# Use $CC to link under sequent, because it throws in some extra .o
 	# files that make .init and .fini sections work.
 	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
       else
 	_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
       fi
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
       _LT_TAGVAR(hardcode_direct, $1)=yes
       _LT_TAGVAR(hardcode_minus_L, $1)=yes
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     sysv4)
       case $host_vendor in
 	sni)
 	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
 	  _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
 	;;
 	siemens)
 	  ## LD is ld it makes a PLAMLIB
 	  ## CC just makes a GrossModule.
 	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
 	  _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
 	  _LT_TAGVAR(hardcode_direct, $1)=no
         ;;
 	motorola)
 	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
 	  _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
 	;;
       esac
       runpath_var='LD_RUN_PATH'
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     sysv4.3*)
       _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
       ;;
 
     sysv4*MP*)
       if test -d /usr/nec; then
 	_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
 	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
 	runpath_var=LD_RUN_PATH
 	hardcode_runpath_var=yes
 	_LT_TAGVAR(ld_shlibs, $1)=yes
       fi
       ;;
 
     sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
       _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
       _LT_TAGVAR(archive_cmds_need_lc, $1)=no
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       runpath_var='LD_RUN_PATH'
 
       if test "$GCC" = yes; then
 	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       else
 	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       fi
       ;;
 
     sysv5* | sco3.2v5* | sco5v6*)
       # Note: We can NOT use -z defs as we might desire, because we do not
       # link with -lc, and that would cause any symbols used from libc to
       # always be unresolved, which means just about no library would
       # ever link correctly.  If we're not using GNU ld we use -z text
       # though, which does catch some bad symbols but isn't as heavy-handed
       # as -z defs.
       _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
       _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
       _LT_TAGVAR(archive_cmds_need_lc, $1)=no
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
       _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
       _LT_TAGVAR(link_all_deplibs, $1)=yes
       _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
       runpath_var='LD_RUN_PATH'
 
       if test "$GCC" = yes; then
 	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       else
 	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       fi
       ;;
 
     uts4*)
       _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     *)
       _LT_TAGVAR(ld_shlibs, $1)=no
       ;;
     esac
 
     if test x$host_vendor = xsni; then
       case $host in
       sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
 	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
 	;;
       esac
     fi
   fi
 ])
 AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
 test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
 
 _LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
 
 _LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
 _LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
 _LT_DECL([], [extract_expsyms_cmds], [2],
     [The commands to extract the exported symbol list from a shared archive])
 
 #
 # Do we need to explicitly link libc?
 #
 case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
 x|xyes)
   # Assume -lc should be added
   _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
 
   if test "$enable_shared" = yes && test "$GCC" = yes; then
     case $_LT_TAGVAR(archive_cmds, $1) in
     *'~'*)
       # FIXME: we may have to deal with multi-command sequences.
       ;;
     '$CC '*)
       # Test whether the compiler implicitly links with -lc since on some
       # systems, -lgcc has to come before -lc. If gcc already passes -lc
       # to ld, don't add -lc before -lgcc.
       AC_CACHE_CHECK([whether -lc should be explicitly linked in],
 	[lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
 	[$RM conftest*
 	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
 	if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
 	  soname=conftest
 	  lib=conftest
 	  libobjs=conftest.$ac_objext
 	  deplibs=
 	  wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
 	  pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
 	  compiler_flags=-v
 	  linker_flags=-v
 	  verstring=
 	  output_objdir=.
 	  libname=conftest
 	  lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
 	  _LT_TAGVAR(allow_undefined_flag, $1)=
 	  if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
 	  then
 	    lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
 	  else
 	    lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
 	  fi
 	  _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
 	else
 	  cat conftest.err 1>&5
 	fi
 	$RM conftest*
 	])
       _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
       ;;
     esac
   fi
   ;;
 esac
 
 _LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
     [Whether or not to add -lc for building shared libraries])
 _LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
     [enable_shared_with_static_runtimes], [0],
     [Whether or not to disallow shared libs when runtime libs are static])
 _LT_TAGDECL([], [export_dynamic_flag_spec], [1],
     [Compiler flag to allow reflexive dlopens])
 _LT_TAGDECL([], [whole_archive_flag_spec], [1],
     [Compiler flag to generate shared objects directly from archives])
 _LT_TAGDECL([], [compiler_needs_object], [1],
     [Whether the compiler copes with passing no objects directly])
 _LT_TAGDECL([], [old_archive_from_new_cmds], [2],
     [Create an old-style archive from a shared archive])
 _LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
     [Create a temporary old-style archive to link instead of a shared archive])
 _LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
 _LT_TAGDECL([], [archive_expsym_cmds], [2])
 _LT_TAGDECL([], [module_cmds], [2],
     [Commands used to build a loadable module if different from building
     a shared archive.])
 _LT_TAGDECL([], [module_expsym_cmds], [2])
 _LT_TAGDECL([], [with_gnu_ld], [1],
     [Whether we are building with GNU ld or not])
 _LT_TAGDECL([], [allow_undefined_flag], [1],
     [Flag that allows shared libraries with undefined symbols to be built])
 _LT_TAGDECL([], [no_undefined_flag], [1],
     [Flag that enforces no undefined symbols])
 _LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
     [Flag to hardcode $libdir into a binary during linking.
     This must work even if $libdir does not exist])
 _LT_TAGDECL([], [hardcode_libdir_separator], [1],
     [Whether we need a single "-rpath" flag with a separated argument])
 _LT_TAGDECL([], [hardcode_direct], [0],
     [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
     DIR into the resulting binary])
 _LT_TAGDECL([], [hardcode_direct_absolute], [0],
     [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
     DIR into the resulting binary and the resulting library dependency is
     "absolute", i.e impossible to change by setting ${shlibpath_var} if the
     library is relocated])
 _LT_TAGDECL([], [hardcode_minus_L], [0],
     [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
     into the resulting binary])
 _LT_TAGDECL([], [hardcode_shlibpath_var], [0],
     [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
     into the resulting binary])
 _LT_TAGDECL([], [hardcode_automatic], [0],
     [Set to "yes" if building a shared library automatically hardcodes DIR
     into the library and all subsequent libraries and executables linked
     against it])
 _LT_TAGDECL([], [inherit_rpath], [0],
     [Set to yes if linker adds runtime paths of dependent libraries
     to runtime path list])
 _LT_TAGDECL([], [link_all_deplibs], [0],
     [Whether libtool must link a program against all its dependency libraries])
 _LT_TAGDECL([], [always_export_symbols], [0],
     [Set to "yes" if exported symbols are required])
 _LT_TAGDECL([], [export_symbols_cmds], [2],
     [The commands to list exported symbols])
 _LT_TAGDECL([], [exclude_expsyms], [1],
     [Symbols that should not be listed in the preloaded symbols])
 _LT_TAGDECL([], [include_expsyms], [1],
     [Symbols that must always be exported])
 _LT_TAGDECL([], [prelink_cmds], [2],
     [Commands necessary for linking programs (against libraries) with templates])
 _LT_TAGDECL([], [postlink_cmds], [2],
     [Commands necessary for finishing linking programs])
 _LT_TAGDECL([], [file_list_spec], [1],
     [Specify filename containing input files])
 dnl FIXME: Not yet implemented
 dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
 dnl    [Compiler flag to generate thread safe objects])
 ])# _LT_LINKER_SHLIBS
 
 
 # _LT_LANG_C_CONFIG([TAG])
 # ------------------------
 # Ensure that the configuration variables for a C compiler are suitably
 # defined.  These variables are subsequently used by _LT_CONFIG to write
 # the compiler configuration to `libtool'.
 m4_defun([_LT_LANG_C_CONFIG],
 [m4_require([_LT_DECL_EGREP])dnl
 lt_save_CC="$CC"
 AC_LANG_PUSH(C)
 
 # Source file extension for C test sources.
 ac_ext=c
 
 # Object file extension for compiled C test sources.
 objext=o
 _LT_TAGVAR(objext, $1)=$objext
 
 # Code to be used in simple compile tests
 lt_simple_compile_test_code="int some_variable = 0;"
 
 # Code to be used in simple link tests
 lt_simple_link_test_code='int main(){return(0);}'
 
 _LT_TAG_COMPILER
 # Save the default compiler, since it gets overwritten when the other
 # tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
 compiler_DEFAULT=$CC
 
 # save warnings/boilerplate of simple test code
 _LT_COMPILER_BOILERPLATE
 _LT_LINKER_BOILERPLATE
 
 ## CAVEAT EMPTOR:
 ## There is no encapsulation within the following macros, do not change
 ## the running order or otherwise move them around unless you know exactly
 ## what you are doing...
 if test -n "$compiler"; then
   _LT_COMPILER_NO_RTTI($1)
   _LT_COMPILER_PIC($1)
   _LT_COMPILER_C_O($1)
   _LT_COMPILER_FILE_LOCKS($1)
   _LT_LINKER_SHLIBS($1)
   _LT_SYS_DYNAMIC_LINKER($1)
   _LT_LINKER_HARDCODE_LIBPATH($1)
   LT_SYS_DLOPEN_SELF
   _LT_CMD_STRIPLIB
 
   # Report which library types will actually be built
   AC_MSG_CHECKING([if libtool supports shared libraries])
   AC_MSG_RESULT([$can_build_shared])
 
   AC_MSG_CHECKING([whether to build shared libraries])
   test "$can_build_shared" = "no" && enable_shared=no
 
   # On AIX, shared libraries and static libraries use the same namespace, and
   # are all built from PIC.
   case $host_os in
   aix3*)
     test "$enable_shared" = yes && enable_static=no
     if test -n "$RANLIB"; then
       archive_cmds="$archive_cmds~\$RANLIB \$lib"
       postinstall_cmds='$RANLIB $lib'
     fi
     ;;
 
   aix[[4-9]]*)
     if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
       test "$enable_shared" = yes && enable_static=no
     fi
     ;;
   esac
   AC_MSG_RESULT([$enable_shared])
 
   AC_MSG_CHECKING([whether to build static libraries])
   # Make sure either enable_shared or enable_static is yes.
   test "$enable_shared" = yes || enable_static=yes
   AC_MSG_RESULT([$enable_static])
 
   _LT_CONFIG($1)
 fi
 AC_LANG_POP
 CC="$lt_save_CC"
 ])# _LT_LANG_C_CONFIG
 
 
 # _LT_LANG_CXX_CONFIG([TAG])
 # --------------------------
 # Ensure that the configuration variables for a C++ compiler are suitably
 # defined.  These variables are subsequently used by _LT_CONFIG to write
 # the compiler configuration to `libtool'.
 m4_defun([_LT_LANG_CXX_CONFIG],
 [m4_require([_LT_FILEUTILS_DEFAULTS])dnl
 m4_require([_LT_DECL_EGREP])dnl
 m4_require([_LT_PATH_MANIFEST_TOOL])dnl
 if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
     ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
     (test "X$CXX" != "Xg++"))) ; then
   AC_PROG_CXXCPP
 else
   _lt_caught_CXX_error=yes
 fi
 
 AC_LANG_PUSH(C++)
 _LT_TAGVAR(archive_cmds_need_lc, $1)=no
 _LT_TAGVAR(allow_undefined_flag, $1)=
 _LT_TAGVAR(always_export_symbols, $1)=no
 _LT_TAGVAR(archive_expsym_cmds, $1)=
 _LT_TAGVAR(compiler_needs_object, $1)=no
 _LT_TAGVAR(export_dynamic_flag_spec, $1)=
 _LT_TAGVAR(hardcode_direct, $1)=no
 _LT_TAGVAR(hardcode_direct_absolute, $1)=no
 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
 _LT_TAGVAR(hardcode_libdir_separator, $1)=
 _LT_TAGVAR(hardcode_minus_L, $1)=no
 _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
 _LT_TAGVAR(hardcode_automatic, $1)=no
 _LT_TAGVAR(inherit_rpath, $1)=no
 _LT_TAGVAR(module_cmds, $1)=
 _LT_TAGVAR(module_expsym_cmds, $1)=
 _LT_TAGVAR(link_all_deplibs, $1)=unknown
 _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
 _LT_TAGVAR(reload_flag, $1)=$reload_flag
 _LT_TAGVAR(reload_cmds, $1)=$reload_cmds
 _LT_TAGVAR(no_undefined_flag, $1)=
 _LT_TAGVAR(whole_archive_flag_spec, $1)=
 _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
 
 # Source file extension for C++ test sources.
 ac_ext=cpp
 
 # Object file extension for compiled C++ test sources.
 objext=o
 _LT_TAGVAR(objext, $1)=$objext
 
 # No sense in running all these tests if we already determined that
 # the CXX compiler isn't working.  Some variables (like enable_shared)
 # are currently assumed to apply to all compilers on this platform,
 # and will be corrupted by setting them based on a non-working compiler.
 if test "$_lt_caught_CXX_error" != yes; then
   # Code to be used in simple compile tests
   lt_simple_compile_test_code="int some_variable = 0;"
 
   # Code to be used in simple link tests
   lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
 
   # ltmain only uses $CC for tagged configurations so make sure $CC is set.
   _LT_TAG_COMPILER
 
   # save warnings/boilerplate of simple test code
   _LT_COMPILER_BOILERPLATE
   _LT_LINKER_BOILERPLATE
 
   # Allow CC to be a program name with arguments.
   lt_save_CC=$CC
   lt_save_CFLAGS=$CFLAGS
   lt_save_LD=$LD
   lt_save_GCC=$GCC
   GCC=$GXX
   lt_save_with_gnu_ld=$with_gnu_ld
   lt_save_path_LD=$lt_cv_path_LD
   if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
     lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
   else
     $as_unset lt_cv_prog_gnu_ld
   fi
   if test -n "${lt_cv_path_LDCXX+set}"; then
     lt_cv_path_LD=$lt_cv_path_LDCXX
   else
     $as_unset lt_cv_path_LD
   fi
   test -z "${LDCXX+set}" || LD=$LDCXX
   CC=${CXX-"c++"}
   CFLAGS=$CXXFLAGS
   compiler=$CC
   _LT_TAGVAR(compiler, $1)=$CC
   _LT_CC_BASENAME([$compiler])
 
   if test -n "$compiler"; then
     # We don't want -fno-exception when compiling C++ code, so set the
     # no_builtin_flag separately
     if test "$GXX" = yes; then
       _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
     else
       _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
     fi
 
     if test "$GXX" = yes; then
       # Set up default GNU C++ configuration
 
       LT_PATH_LD
 
       # Check if GNU C++ uses GNU ld as the underlying linker, since the
       # archiving commands below assume that GNU ld is being used.
       if test "$with_gnu_ld" = yes; then
         _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
         _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
 
         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
         _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
 
         # If archive_cmds runs LD, not CC, wlarc should be empty
         # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
         #     investigate it a little bit more. (MM)
         wlarc='${wl}'
 
         # ancient GNU ld didn't support --whole-archive et. al.
         if eval "`$CC -print-prog-name=ld` --help 2>&1" |
 	  $GREP 'no-whole-archive' > /dev/null; then
           _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
         else
           _LT_TAGVAR(whole_archive_flag_spec, $1)=
         fi
       else
         with_gnu_ld=no
         wlarc=
 
         # A generic and very simple default shared library creation
         # command for GNU C++ for the case where it uses the native
         # linker, instead of GNU ld.  If possible, this setting should
         # overridden to take advantage of the native linker features on
         # the platform it is being used on.
         _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
       fi
 
       # Commands to make compiler produce verbose output that lists
       # what "hidden" libraries, object files and flags are used when
       # linking a shared library.
       output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
 
     else
       GXX=no
       with_gnu_ld=no
       wlarc=
     fi
 
     # PORTME: fill in a description of your system's C++ link characteristics
     AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
     _LT_TAGVAR(ld_shlibs, $1)=yes
     case $host_os in
       aix3*)
         # FIXME: insert proper C++ library support
         _LT_TAGVAR(ld_shlibs, $1)=no
         ;;
       aix[[4-9]]*)
         if test "$host_cpu" = ia64; then
           # On IA64, the linker does run time linking by default, so we don't
           # have to do anything special.
           aix_use_runtimelinking=no
           exp_sym_flag='-Bexport'
           no_entry_flag=""
         else
           aix_use_runtimelinking=no
 
           # Test if we are trying to use run time linking or normal
           # AIX style linking. If -brtl is somewhere in LDFLAGS, we
           # need to do runtime linking.
           case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
 	    for ld_flag in $LDFLAGS; do
 	      case $ld_flag in
 	      *-brtl*)
 	        aix_use_runtimelinking=yes
 	        break
 	        ;;
 	      esac
 	    done
 	    ;;
           esac
 
           exp_sym_flag='-bexport'
           no_entry_flag='-bnoentry'
         fi
 
         # When large executables or shared objects are built, AIX ld can
         # have problems creating the table of contents.  If linking a library
         # or program results in "error TOC overflow" add -mminimal-toc to
         # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
         # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
 
         _LT_TAGVAR(archive_cmds, $1)=''
         _LT_TAGVAR(hardcode_direct, $1)=yes
         _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
         _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
         _LT_TAGVAR(link_all_deplibs, $1)=yes
         _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
 
         if test "$GXX" = yes; then
           case $host_os in aix4.[[012]]|aix4.[[012]].*)
           # We only want to do this on AIX 4.2 and lower, the check
           # below for broken collect2 doesn't work under 4.3+
 	  collect2name=`${CC} -print-prog-name=collect2`
 	  if test -f "$collect2name" &&
 	     strings "$collect2name" | $GREP resolve_lib_name >/dev/null
 	  then
 	    # We have reworked collect2
 	    :
 	  else
 	    # We have old collect2
 	    _LT_TAGVAR(hardcode_direct, $1)=unsupported
 	    # It fails to find uninstalled libraries when the uninstalled
 	    # path is not listed in the libpath.  Setting hardcode_minus_L
 	    # to unsupported forces relinking
 	    _LT_TAGVAR(hardcode_minus_L, $1)=yes
 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
 	    _LT_TAGVAR(hardcode_libdir_separator, $1)=
 	  fi
           esac
           shared_flag='-shared'
 	  if test "$aix_use_runtimelinking" = yes; then
 	    shared_flag="$shared_flag "'${wl}-G'
 	  fi
         else
           # not using gcc
           if test "$host_cpu" = ia64; then
 	  # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
 	  # chokes on -Wl,-G. The following line is correct:
 	  shared_flag='-G'
           else
 	    if test "$aix_use_runtimelinking" = yes; then
 	      shared_flag='${wl}-G'
 	    else
 	      shared_flag='${wl}-bM:SRE'
 	    fi
           fi
         fi
 
         _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
         # It seems that -bexpall does not export symbols beginning with
         # underscore (_), so it is better to generate a list of symbols to
 	# export.
         _LT_TAGVAR(always_export_symbols, $1)=yes
         if test "$aix_use_runtimelinking" = yes; then
           # Warning - without using the other runtime loading flags (-brtl),
           # -berok will link without error, but may produce a broken library.
           _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
           # Determine the default libpath from the value encoded in an empty
           # executable.
           _LT_SYS_MODULE_PATH_AIX([$1])
           _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
 
           _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
         else
           if test "$host_cpu" = ia64; then
 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
 	    _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
 	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
           else
 	    # Determine the default libpath from the value encoded in an
 	    # empty executable.
 	    _LT_SYS_MODULE_PATH_AIX([$1])
 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
 	    # Warning - without using the other run time loading flags,
 	    # -berok will link without error, but may produce a broken library.
 	    _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
 	    _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
 	    if test "$with_gnu_ld" = yes; then
 	      # We only use this code for GNU lds that support --whole-archive.
 	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
 	    else
 	      # Exported symbols can be pulled into shared objects from archives
 	      _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
 	    fi
 	    _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
 	    # This is similar to how AIX traditionally builds its shared
 	    # libraries.
 	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
           fi
         fi
         ;;
 
       beos*)
 	if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
 	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
 	  # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
 	  # support --undefined.  This deserves some investigation.  FIXME
 	  _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 	else
 	  _LT_TAGVAR(ld_shlibs, $1)=no
 	fi
 	;;
 
       chorus*)
         case $cc_basename in
           *)
 	  # FIXME: insert proper C++ library support
 	  _LT_TAGVAR(ld_shlibs, $1)=no
 	  ;;
         esac
         ;;
 
       cygwin* | mingw* | pw32* | cegcc*)
 	case $GXX,$cc_basename in
 	,cl* | no,cl*)
 	  # Native MSVC
 	  # hardcode_libdir_flag_spec is actually meaningless, as there is
 	  # no search path for DLLs.
 	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
 	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
 	  _LT_TAGVAR(always_export_symbols, $1)=yes
 	  _LT_TAGVAR(file_list_spec, $1)='@'
 	  # Tell ltmain to make .lib files, not .a files.
 	  libext=lib
 	  # Tell ltmain to make .dll files, not .so files.
 	  shrext_cmds=".dll"
 	  # FIXME: Setting linknames here is a bad hack.
 	  _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
 	  _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
 	      $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
 	    else
 	      $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
 	    fi~
 	    $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
 	    linknames='
 	  # The linker will not automatically build a static lib if we build a DLL.
 	  # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
 	  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
 	  # Don't use ranlib
 	  _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
 	  _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
 	    lt_tool_outputfile="@TOOL_OUTPUT@"~
 	    case $lt_outputfile in
 	      *.exe|*.EXE) ;;
 	      *)
 		lt_outputfile="$lt_outputfile.exe"
 		lt_tool_outputfile="$lt_tool_outputfile.exe"
 		;;
 	    esac~
 	    func_to_tool_file "$lt_outputfile"~
 	    if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
 	      $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
 	      $RM "$lt_outputfile.manifest";
 	    fi'
 	  ;;
 	*)
 	  # g++
 	  # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
 	  # as there is no search path for DLLs.
 	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
 	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
 	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
 	  _LT_TAGVAR(always_export_symbols, $1)=no
 	  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
 
 	  if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
 	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
 	    # If the export-symbols file already is a .def file (1st line
 	    # is EXPORTS), use it as is; otherwise, prepend...
 	    _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
 	      cp $export_symbols $output_objdir/$soname.def;
 	    else
 	      echo EXPORTS > $output_objdir/$soname.def;
 	      cat $export_symbols >> $output_objdir/$soname.def;
 	    fi~
 	    $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
 	  else
 	    _LT_TAGVAR(ld_shlibs, $1)=no
 	  fi
 	  ;;
 	esac
 	;;
       darwin* | rhapsody*)
         _LT_DARWIN_LINKER_FEATURES($1)
 	;;
 
       dgux*)
         case $cc_basename in
           ec++*)
 	    # FIXME: insert proper C++ library support
 	    _LT_TAGVAR(ld_shlibs, $1)=no
 	    ;;
           ghcx*)
 	    # Green Hills C++ Compiler
 	    # FIXME: insert proper C++ library support
 	    _LT_TAGVAR(ld_shlibs, $1)=no
 	    ;;
           *)
 	    # FIXME: insert proper C++ library support
 	    _LT_TAGVAR(ld_shlibs, $1)=no
 	    ;;
         esac
         ;;
 
       freebsd2.*)
         # C++ shared libraries reported to be fairly broken before
 	# switch to ELF
         _LT_TAGVAR(ld_shlibs, $1)=no
         ;;
 
       freebsd-elf*)
         _LT_TAGVAR(archive_cmds_need_lc, $1)=no
         ;;
 
       freebsd* | dragonfly*)
         # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
         # conventions
         _LT_TAGVAR(ld_shlibs, $1)=yes
         ;;
 
       gnu*)
         ;;
 
       haiku*)
         _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
         _LT_TAGVAR(link_all_deplibs, $1)=yes
         ;;
 
       hpux9*)
         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
         _LT_TAGVAR(hardcode_libdir_separator, $1)=:
         _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
         _LT_TAGVAR(hardcode_direct, $1)=yes
         _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
 				             # but as the default
 				             # location of the library.
 
         case $cc_basename in
           CC*)
             # FIXME: insert proper C++ library support
             _LT_TAGVAR(ld_shlibs, $1)=no
             ;;
           aCC*)
             _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
             # Commands to make compiler produce verbose output that lists
             # what "hidden" libraries, object files and flags are used when
             # linking a shared library.
             #
             # There doesn't appear to be a way to prevent this compiler from
             # explicitly linking system object files so we need to strip them
             # from the output so that they don't get included in the library
             # dependencies.
             output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
             ;;
           *)
             if test "$GXX" = yes; then
               _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
             else
               # FIXME: insert proper C++ library support
               _LT_TAGVAR(ld_shlibs, $1)=no
             fi
             ;;
         esac
         ;;
 
       hpux10*|hpux11*)
         if test $with_gnu_ld = no; then
 	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
 	  _LT_TAGVAR(hardcode_libdir_separator, $1)=:
 
           case $host_cpu in
             hppa*64*|ia64*)
               ;;
             *)
 	      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
               ;;
           esac
         fi
         case $host_cpu in
           hppa*64*|ia64*)
             _LT_TAGVAR(hardcode_direct, $1)=no
             _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
             ;;
           *)
             _LT_TAGVAR(hardcode_direct, $1)=yes
             _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
             _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
 					         # but as the default
 					         # location of the library.
             ;;
         esac
 
         case $cc_basename in
           CC*)
 	    # FIXME: insert proper C++ library support
 	    _LT_TAGVAR(ld_shlibs, $1)=no
 	    ;;
           aCC*)
 	    case $host_cpu in
 	      hppa*64*)
 	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	        ;;
 	      ia64*)
 	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	        ;;
 	      *)
 	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	        ;;
 	    esac
 	    # Commands to make compiler produce verbose output that lists
 	    # what "hidden" libraries, object files and flags are used when
 	    # linking a shared library.
 	    #
 	    # There doesn't appear to be a way to prevent this compiler from
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
 	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
 	    ;;
           *)
 	    if test "$GXX" = yes; then
 	      if test $with_gnu_ld = no; then
 	        case $host_cpu in
 	          hppa*64*)
 	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	            ;;
 	          ia64*)
 	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	            ;;
 	          *)
 	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	            ;;
 	        esac
 	      fi
 	    else
 	      # FIXME: insert proper C++ library support
 	      _LT_TAGVAR(ld_shlibs, $1)=no
 	    fi
 	    ;;
         esac
         ;;
 
       interix[[3-9]]*)
 	_LT_TAGVAR(hardcode_direct, $1)=no
 	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
 	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
 	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
 	# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
 	# Instead, shared libraries are loaded at an image base (0x10000000 by
 	# default) and relocated if they conflict, which is a slow very memory
 	# consuming and fragmenting process.  To avoid this, we pick a random,
 	# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
 	# time.  Moving up from 0x10000000 also allows more sbrk(2) space.
 	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
 	_LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
 	;;
       irix5* | irix6*)
         case $cc_basename in
           CC*)
 	    # SGI C++
 	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
 
 	    # Archives containing C++ object files must be created using
 	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
 	    # necessary to make sure instantiated templates are included
 	    # in the archive.
 	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
 	    ;;
           *)
 	    if test "$GXX" = yes; then
 	      if test "$with_gnu_ld" = no; then
 	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 	      else
 	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
 	      fi
 	    fi
 	    _LT_TAGVAR(link_all_deplibs, $1)=yes
 	    ;;
         esac
         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
         _LT_TAGVAR(hardcode_libdir_separator, $1)=:
         _LT_TAGVAR(inherit_rpath, $1)=yes
         ;;
 
       linux* | k*bsd*-gnu | kopensolaris*-gnu)
         case $cc_basename in
           KCC*)
 	    # Kuck and Associates, Inc. (KAI) C++ Compiler
 
 	    # KCC will only create a shared library if the output file
 	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
 	    # to its proper name (with version) after linking.
 	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
 	    _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
 	    # Commands to make compiler produce verbose output that lists
 	    # what "hidden" libraries, object files and flags are used when
 	    # linking a shared library.
 	    #
 	    # There doesn't appear to be a way to prevent this compiler from
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
 	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
 
 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
 	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
 
 	    # Archives containing C++ object files must be created using
 	    # "CC -Bstatic", where "CC" is the KAI C++ compiler.
 	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
 	    ;;
 	  icpc* | ecpc* )
 	    # Intel C++
 	    with_gnu_ld=yes
 	    # version 8.0 and above of icpc choke on multiply defined symbols
 	    # if we add $predep_objects and $postdep_objects, however 7.1 and
 	    # earlier do not add the objects themselves.
 	    case `$CC -V 2>&1` in
 	      *"Version 7."*)
 	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
 		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
 		;;
 	      *)  # Version 8.0 or newer
 	        tmp_idyn=
 	        case $host_cpu in
 		  ia64*) tmp_idyn=' -i_dynamic';;
 		esac
 	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
 		;;
 	    esac
 	    _LT_TAGVAR(archive_cmds_need_lc, $1)=no
 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
 	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
 	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
 	    ;;
           pgCC* | pgcpp*)
             # Portland Group C++ compiler
 	    case `$CC -V` in
 	    *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
 	      _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
 		rm -rf $tpldir~
 		$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
 		compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
 	      _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
 		rm -rf $tpldir~
 		$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
 		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
 		$RANLIB $oldlib'
 	      _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
 		rm -rf $tpldir~
 		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
 		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
 	      _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
 		rm -rf $tpldir~
 		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
 		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
 	      ;;
 	    *) # Version 6 and above use weak symbols
 	      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
 	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
 	      ;;
 	    esac
 
 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
 	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
 	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
             ;;
 	  cxx*)
 	    # Compaq C++
 	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
 	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
 
 	    runpath_var=LD_RUN_PATH
 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
 	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
 
 	    # Commands to make compiler produce verbose output that lists
 	    # what "hidden" libraries, object files and flags are used when
 	    # linking a shared library.
 	    #
 	    # There doesn't appear to be a way to prevent this compiler from
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
 	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
 	    ;;
 	  xl* | mpixl* | bgxl*)
 	    # IBM XL 8.0 on PPC, with GNU ld
 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
 	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
 	    _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 	    if test "x$supports_anon_versioning" = xyes; then
 	      _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
 		cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
 		echo "local: *; };" >> $output_objdir/$libname.ver~
 		$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
 	    fi
 	    ;;
 	  *)
 	    case `$CC -V 2>&1 | sed 5q` in
 	    *Sun\ C*)
 	      # Sun C++ 5.9
 	      _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
 	      _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
 	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
 	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
 	      _LT_TAGVAR(compiler_needs_object, $1)=yes
 
 	      # Not sure whether something based on
 	      # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
 	      # would be better.
 	      output_verbose_link_cmd='func_echo_all'
 
 	      # Archives containing C++ object files must be created using
 	      # "CC -xar", where "CC" is the Sun C++ compiler.  This is
 	      # necessary to make sure instantiated templates are included
 	      # in the archive.
 	      _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
 	      ;;
 	    esac
 	    ;;
 	esac
 	;;
 
       lynxos*)
         # FIXME: insert proper C++ library support
 	_LT_TAGVAR(ld_shlibs, $1)=no
 	;;
 
       m88k*)
         # FIXME: insert proper C++ library support
         _LT_TAGVAR(ld_shlibs, $1)=no
 	;;
 
       mvs*)
         case $cc_basename in
           cxx*)
 	    # FIXME: insert proper C++ library support
 	    _LT_TAGVAR(ld_shlibs, $1)=no
 	    ;;
 	  *)
 	    # FIXME: insert proper C++ library support
 	    _LT_TAGVAR(ld_shlibs, $1)=no
 	    ;;
 	esac
 	;;
 
       netbsd*)
         if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
 	  _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
 	  wlarc=
 	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
 	  _LT_TAGVAR(hardcode_direct, $1)=yes
 	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
 	fi
 	# Workaround some broken pre-1.5 toolchains
 	output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
 	;;
 
       *nto* | *qnx*)
         _LT_TAGVAR(ld_shlibs, $1)=yes
 	;;
 
       openbsd2*)
         # C++ shared libraries are fairly broken
 	_LT_TAGVAR(ld_shlibs, $1)=no
 	;;
 
       openbsd*)
 	if test -f /usr/libexec/ld.so; then
 	  _LT_TAGVAR(hardcode_direct, $1)=yes
 	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
 	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
 	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
 	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
 	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
 	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
 	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
 	    _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
 	  fi
 	  output_verbose_link_cmd=func_echo_all
 	else
 	  _LT_TAGVAR(ld_shlibs, $1)=no
 	fi
 	;;
 
       osf3* | osf4* | osf5*)
         case $cc_basename in
           KCC*)
 	    # Kuck and Associates, Inc. (KAI) C++ Compiler
 
 	    # KCC will only create a shared library if the output file
 	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
 	    # to its proper name (with version) after linking.
 	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
 
 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
 	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
 
 	    # Archives containing C++ object files must be created using
 	    # the KAI C++ compiler.
 	    case $host in
 	      osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
 	      *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
 	    esac
 	    ;;
           RCC*)
 	    # Rational C++ 2.4.1
 	    # FIXME: insert proper C++ library support
 	    _LT_TAGVAR(ld_shlibs, $1)=no
 	    ;;
           cxx*)
 	    case $host in
 	      osf3*)
 	        _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
 	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
 	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
 		;;
 	      *)
 	        _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
 	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
 	        _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
 	          echo "-hidden">> $lib.exp~
 	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
 	          $RM $lib.exp'
 	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
 		;;
 	    esac
 
 	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
 
 	    # Commands to make compiler produce verbose output that lists
 	    # what "hidden" libraries, object files and flags are used when
 	    # linking a shared library.
 	    #
 	    # There doesn't appear to be a way to prevent this compiler from
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
 	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
 	    ;;
 	  *)
 	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
 	      _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
 	      case $host in
 	        osf3*)
 	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 		  ;;
 	        *)
 	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 		  ;;
 	      esac
 
 	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
 	      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
 
 	      # Commands to make compiler produce verbose output that lists
 	      # what "hidden" libraries, object files and flags are used when
 	      # linking a shared library.
 	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
 
 	    else
 	      # FIXME: insert proper C++ library support
 	      _LT_TAGVAR(ld_shlibs, $1)=no
 	    fi
 	    ;;
         esac
         ;;
 
       psos*)
         # FIXME: insert proper C++ library support
         _LT_TAGVAR(ld_shlibs, $1)=no
         ;;
 
       sunos4*)
         case $cc_basename in
           CC*)
 	    # Sun C++ 4.x
 	    # FIXME: insert proper C++ library support
 	    _LT_TAGVAR(ld_shlibs, $1)=no
 	    ;;
           lcc*)
 	    # Lucid
 	    # FIXME: insert proper C++ library support
 	    _LT_TAGVAR(ld_shlibs, $1)=no
 	    ;;
           *)
 	    # FIXME: insert proper C++ library support
 	    _LT_TAGVAR(ld_shlibs, $1)=no
 	    ;;
         esac
         ;;
 
       solaris*)
         case $cc_basename in
           CC* | sunCC*)
 	    # Sun C++ 4.2, 5.x and Centerline C++
             _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
 	    _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
 	    _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
 	      $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
 
 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
 	    _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
 	    case $host_os in
 	      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
 	      *)
 		# The compiler driver will combine and reorder linker options,
 		# but understands `-z linker_flag'.
 	        # Supported since Solaris 2.6 (maybe 2.5.1?)
 		_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
 	        ;;
 	    esac
 	    _LT_TAGVAR(link_all_deplibs, $1)=yes
 
 	    output_verbose_link_cmd='func_echo_all'
 
 	    # Archives containing C++ object files must be created using
 	    # "CC -xar", where "CC" is the Sun C++ compiler.  This is
 	    # necessary to make sure instantiated templates are included
 	    # in the archive.
 	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
 	    ;;
           gcx*)
 	    # Green Hills C++ Compiler
 	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
 
 	    # The C++ compiler must be used to create the archive.
 	    _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
 	    ;;
           *)
 	    # GNU C++ compiler with Solaris linker
 	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
 	      _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
 	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
 	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
 	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
 		  $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
 
 	        # Commands to make compiler produce verbose output that lists
 	        # what "hidden" libraries, object files and flags are used when
 	        # linking a shared library.
 	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
 	      else
 	        # g++ 2.7 appears to require `-G' NOT `-shared' on this
 	        # platform.
 	        _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
 	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
 		  $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
 
 	        # Commands to make compiler produce verbose output that lists
 	        # what "hidden" libraries, object files and flags are used when
 	        # linking a shared library.
 	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
 	      fi
 
 	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
 	      case $host_os in
 		solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
 		*)
 		  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
 		  ;;
 	      esac
 	    fi
 	    ;;
         esac
         ;;
 
     sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
       _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
       _LT_TAGVAR(archive_cmds_need_lc, $1)=no
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       runpath_var='LD_RUN_PATH'
 
       case $cc_basename in
         CC*)
 	  _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
 	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
       esac
       ;;
 
       sysv5* | sco3.2v5* | sco5v6*)
 	# Note: We can NOT use -z defs as we might desire, because we do not
 	# link with -lc, and that would cause any symbols used from libc to
 	# always be unresolved, which means just about no library would
 	# ever link correctly.  If we're not using GNU ld we use -z text
 	# though, which does catch some bad symbols but isn't as heavy-handed
 	# as -z defs.
 	_LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
 	_LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
 	_LT_TAGVAR(archive_cmds_need_lc, $1)=no
 	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
 	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
 	_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
 	_LT_TAGVAR(link_all_deplibs, $1)=yes
 	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
 	runpath_var='LD_RUN_PATH'
 
 	case $cc_basename in
           CC*)
 	    _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
 	      '"$_LT_TAGVAR(old_archive_cmds, $1)"
 	    _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
 	      '"$_LT_TAGVAR(reload_cmds, $1)"
 	    ;;
 	  *)
 	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	    ;;
 	esac
       ;;
 
       tandem*)
         case $cc_basename in
           NCC*)
 	    # NonStop-UX NCC 3.20
 	    # FIXME: insert proper C++ library support
 	    _LT_TAGVAR(ld_shlibs, $1)=no
 	    ;;
           *)
 	    # FIXME: insert proper C++ library support
 	    _LT_TAGVAR(ld_shlibs, $1)=no
 	    ;;
         esac
         ;;
 
       vxworks*)
         # FIXME: insert proper C++ library support
         _LT_TAGVAR(ld_shlibs, $1)=no
         ;;
 
       *)
         # FIXME: insert proper C++ library support
         _LT_TAGVAR(ld_shlibs, $1)=no
         ;;
     esac
 
     AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
     test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
 
     _LT_TAGVAR(GCC, $1)="$GXX"
     _LT_TAGVAR(LD, $1)="$LD"
 
     ## CAVEAT EMPTOR:
     ## There is no encapsulation within the following macros, do not change
     ## the running order or otherwise move them around unless you know exactly
     ## what you are doing...
     _LT_SYS_HIDDEN_LIBDEPS($1)
     _LT_COMPILER_PIC($1)
     _LT_COMPILER_C_O($1)
     _LT_COMPILER_FILE_LOCKS($1)
     _LT_LINKER_SHLIBS($1)
     _LT_SYS_DYNAMIC_LINKER($1)
     _LT_LINKER_HARDCODE_LIBPATH($1)
 
     _LT_CONFIG($1)
   fi # test -n "$compiler"
 
   CC=$lt_save_CC
   CFLAGS=$lt_save_CFLAGS
   LDCXX=$LD
   LD=$lt_save_LD
   GCC=$lt_save_GCC
   with_gnu_ld=$lt_save_with_gnu_ld
   lt_cv_path_LDCXX=$lt_cv_path_LD
   lt_cv_path_LD=$lt_save_path_LD
   lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
   lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
 fi # test "$_lt_caught_CXX_error" != yes
 
 AC_LANG_POP
 ])# _LT_LANG_CXX_CONFIG
 
 
 # _LT_FUNC_STRIPNAME_CNF
 # ----------------------
 # func_stripname_cnf prefix suffix name
 # strip PREFIX and SUFFIX off of NAME.
 # PREFIX and SUFFIX must not contain globbing or regex special
 # characters, hashes, percent signs, but SUFFIX may contain a leading
 # dot (in which case that matches only a dot).
 #
 # This function is identical to the (non-XSI) version of func_stripname,
 # except this one can be used by m4 code that may be executed by configure,
 # rather than the libtool script.
 m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
 AC_REQUIRE([_LT_DECL_SED])
 AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
 func_stripname_cnf ()
 {
   case ${2} in
   .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
   *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
   esac
 } # func_stripname_cnf
 ])# _LT_FUNC_STRIPNAME_CNF
 
 # _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
 # ---------------------------------
 # Figure out "hidden" library dependencies from verbose
 # compiler output when linking a shared library.
 # Parse the compiler output and extract the necessary
 # objects, libraries and library flags.
 m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
 [m4_require([_LT_FILEUTILS_DEFAULTS])dnl
 AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
 # Dependencies to place before and after the object being linked:
 _LT_TAGVAR(predep_objects, $1)=
 _LT_TAGVAR(postdep_objects, $1)=
 _LT_TAGVAR(predeps, $1)=
 _LT_TAGVAR(postdeps, $1)=
 _LT_TAGVAR(compiler_lib_search_path, $1)=
 
 dnl we can't use the lt_simple_compile_test_code here,
 dnl because it contains code intended for an executable,
 dnl not a library.  It's possible we should let each
 dnl tag define a new lt_????_link_test_code variable,
 dnl but it's only used here...
 m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
 int a;
 void foo (void) { a = 0; }
 _LT_EOF
 ], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
 class Foo
 {
 public:
   Foo (void) { a = 0; }
 private:
   int a;
 };
 _LT_EOF
 ], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
       subroutine foo
       implicit none
       integer*4 a
       a=0
       return
       end
 _LT_EOF
 ], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
       subroutine foo
       implicit none
       integer a
       a=0
       return
       end
 _LT_EOF
 ], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
 public class foo {
   private int a;
   public void bar (void) {
     a = 0;
   }
 };
 _LT_EOF
 ], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF
 package foo
 func foo() {
 }
 _LT_EOF
 ])
 
 _lt_libdeps_save_CFLAGS=$CFLAGS
 case "$CC $CFLAGS " in #(
 *\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
 *\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
 *\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
 esac
 
 dnl Parse the compiler output and extract the necessary
 dnl objects, libraries and library flags.
 if AC_TRY_EVAL(ac_compile); then
   # Parse the compiler output and extract the necessary
   # objects, libraries and library flags.
 
   # Sentinel used to keep track of whether or not we are before
   # the conftest object file.
   pre_test_object_deps_done=no
 
   for p in `eval "$output_verbose_link_cmd"`; do
     case ${prev}${p} in
 
     -L* | -R* | -l*)
        # Some compilers place space between "-{L,R}" and the path.
        # Remove the space.
        if test $p = "-L" ||
           test $p = "-R"; then
 	 prev=$p
 	 continue
        fi
 
        # Expand the sysroot to ease extracting the directories later.
        if test -z "$prev"; then
          case $p in
          -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
          -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
          -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
          esac
        fi
        case $p in
        =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
        esac
        if test "$pre_test_object_deps_done" = no; then
 	 case ${prev} in
 	 -L | -R)
 	   # Internal compiler library paths should come after those
 	   # provided the user.  The postdeps already come after the
 	   # user supplied libs so there is no need to process them.
 	   if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
 	     _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
 	   else
 	     _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
 	   fi
 	   ;;
 	 # The "-l" case would never come before the object being
 	 # linked, so don't bother handling this case.
 	 esac
        else
 	 if test -z "$_LT_TAGVAR(postdeps, $1)"; then
 	   _LT_TAGVAR(postdeps, $1)="${prev}${p}"
 	 else
 	   _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
 	 fi
        fi
        prev=
        ;;
 
     *.lto.$objext) ;; # Ignore GCC LTO objects
     *.$objext)
        # This assumes that the test object file only shows up
        # once in the compiler output.
        if test "$p" = "conftest.$objext"; then
 	 pre_test_object_deps_done=yes
 	 continue
        fi
 
        if test "$pre_test_object_deps_done" = no; then
 	 if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
 	   _LT_TAGVAR(predep_objects, $1)="$p"
 	 else
 	   _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
 	 fi
        else
 	 if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
 	   _LT_TAGVAR(postdep_objects, $1)="$p"
 	 else
 	   _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
 	 fi
        fi
        ;;
 
     *) ;; # Ignore the rest.
 
     esac
   done
 
   # Clean up.
   rm -f a.out a.exe
 else
   echo "libtool.m4: error: problem compiling $1 test program"
 fi
 
 $RM -f confest.$objext
 CFLAGS=$_lt_libdeps_save_CFLAGS
 
 # PORTME: override above test on systems where it is broken
 m4_if([$1], [CXX],
 [case $host_os in
 interix[[3-9]]*)
   # Interix 3.5 installs completely hosed .la files for C++, so rather than
   # hack all around it, let's just trust "g++" to DTRT.
   _LT_TAGVAR(predep_objects,$1)=
   _LT_TAGVAR(postdep_objects,$1)=
   _LT_TAGVAR(postdeps,$1)=
   ;;
 
 linux*)
   case `$CC -V 2>&1 | sed 5q` in
   *Sun\ C*)
     # Sun C++ 5.9
 
     # The more standards-conforming stlport4 library is
     # incompatible with the Cstd library. Avoid specifying
     # it if it's in CXXFLAGS. Ignore libCrun as
     # -library=stlport4 depends on it.
     case " $CXX $CXXFLAGS " in
     *" -library=stlport4 "*)
       solaris_use_stlport4=yes
       ;;
     esac
 
     if test "$solaris_use_stlport4" != yes; then
       _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
     fi
     ;;
   esac
   ;;
 
 solaris*)
   case $cc_basename in
   CC* | sunCC*)
     # The more standards-conforming stlport4 library is
     # incompatible with the Cstd library. Avoid specifying
     # it if it's in CXXFLAGS. Ignore libCrun as
     # -library=stlport4 depends on it.
     case " $CXX $CXXFLAGS " in
     *" -library=stlport4 "*)
       solaris_use_stlport4=yes
       ;;
     esac
 
     # Adding this requires a known-good setup of shared libraries for
     # Sun compiler versions before 5.6, else PIC objects from an old
     # archive will be linked into the output, leading to subtle bugs.
     if test "$solaris_use_stlport4" != yes; then
       _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
     fi
     ;;
   esac
   ;;
 esac
 ])
 
 case " $_LT_TAGVAR(postdeps, $1) " in
 *" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
 esac
  _LT_TAGVAR(compiler_lib_search_dirs, $1)=
 if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
  _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
 fi
 _LT_TAGDECL([], [compiler_lib_search_dirs], [1],
     [The directories searched by this compiler when creating a shared library])
 _LT_TAGDECL([], [predep_objects], [1],
     [Dependencies to place before and after the objects being linked to
     create a shared library])
 _LT_TAGDECL([], [postdep_objects], [1])
 _LT_TAGDECL([], [predeps], [1])
 _LT_TAGDECL([], [postdeps], [1])
 _LT_TAGDECL([], [compiler_lib_search_path], [1],
     [The library search path used internally by the compiler when linking
     a shared library])
 ])# _LT_SYS_HIDDEN_LIBDEPS
 
 
 # _LT_LANG_F77_CONFIG([TAG])
 # --------------------------
 # Ensure that the configuration variables for a Fortran 77 compiler are
 # suitably defined.  These variables are subsequently used by _LT_CONFIG
 # to write the compiler configuration to `libtool'.
 m4_defun([_LT_LANG_F77_CONFIG],
 [AC_LANG_PUSH(Fortran 77)
 if test -z "$F77" || test "X$F77" = "Xno"; then
   _lt_disable_F77=yes
 fi
 
 _LT_TAGVAR(archive_cmds_need_lc, $1)=no
 _LT_TAGVAR(allow_undefined_flag, $1)=
 _LT_TAGVAR(always_export_symbols, $1)=no
 _LT_TAGVAR(archive_expsym_cmds, $1)=
 _LT_TAGVAR(export_dynamic_flag_spec, $1)=
 _LT_TAGVAR(hardcode_direct, $1)=no
 _LT_TAGVAR(hardcode_direct_absolute, $1)=no
 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
 _LT_TAGVAR(hardcode_libdir_separator, $1)=
 _LT_TAGVAR(hardcode_minus_L, $1)=no
 _LT_TAGVAR(hardcode_automatic, $1)=no
 _LT_TAGVAR(inherit_rpath, $1)=no
 _LT_TAGVAR(module_cmds, $1)=
 _LT_TAGVAR(module_expsym_cmds, $1)=
 _LT_TAGVAR(link_all_deplibs, $1)=unknown
 _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
 _LT_TAGVAR(reload_flag, $1)=$reload_flag
 _LT_TAGVAR(reload_cmds, $1)=$reload_cmds
 _LT_TAGVAR(no_undefined_flag, $1)=
 _LT_TAGVAR(whole_archive_flag_spec, $1)=
 _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
 
 # Source file extension for f77 test sources.
 ac_ext=f
 
 # Object file extension for compiled f77 test sources.
 objext=o
 _LT_TAGVAR(objext, $1)=$objext
 
 # No sense in running all these tests if we already determined that
 # the F77 compiler isn't working.  Some variables (like enable_shared)
 # are currently assumed to apply to all compilers on this platform,
 # and will be corrupted by setting them based on a non-working compiler.
 if test "$_lt_disable_F77" != yes; then
   # Code to be used in simple compile tests
   lt_simple_compile_test_code="\
       subroutine t
       return
       end
 "
 
   # Code to be used in simple link tests
   lt_simple_link_test_code="\
       program t
       end
 "
 
   # ltmain only uses $CC for tagged configurations so make sure $CC is set.
   _LT_TAG_COMPILER
 
   # save warnings/boilerplate of simple test code
   _LT_COMPILER_BOILERPLATE
   _LT_LINKER_BOILERPLATE
 
   # Allow CC to be a program name with arguments.
   lt_save_CC="$CC"
   lt_save_GCC=$GCC
   lt_save_CFLAGS=$CFLAGS
   CC=${F77-"f77"}
   CFLAGS=$FFLAGS
   compiler=$CC
   _LT_TAGVAR(compiler, $1)=$CC
   _LT_CC_BASENAME([$compiler])
   GCC=$G77
   if test -n "$compiler"; then
     AC_MSG_CHECKING([if libtool supports shared libraries])
     AC_MSG_RESULT([$can_build_shared])
 
     AC_MSG_CHECKING([whether to build shared libraries])
     test "$can_build_shared" = "no" && enable_shared=no
 
     # On AIX, shared libraries and static libraries use the same namespace, and
     # are all built from PIC.
     case $host_os in
       aix3*)
         test "$enable_shared" = yes && enable_static=no
         if test -n "$RANLIB"; then
           archive_cmds="$archive_cmds~\$RANLIB \$lib"
           postinstall_cmds='$RANLIB $lib'
         fi
         ;;
       aix[[4-9]]*)
 	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
 	  test "$enable_shared" = yes && enable_static=no
 	fi
         ;;
     esac
     AC_MSG_RESULT([$enable_shared])
 
     AC_MSG_CHECKING([whether to build static libraries])
     # Make sure either enable_shared or enable_static is yes.
     test "$enable_shared" = yes || enable_static=yes
     AC_MSG_RESULT([$enable_static])
 
     _LT_TAGVAR(GCC, $1)="$G77"
     _LT_TAGVAR(LD, $1)="$LD"
 
     ## CAVEAT EMPTOR:
     ## There is no encapsulation within the following macros, do not change
     ## the running order or otherwise move them around unless you know exactly
     ## what you are doing...
     _LT_COMPILER_PIC($1)
     _LT_COMPILER_C_O($1)
     _LT_COMPILER_FILE_LOCKS($1)
     _LT_LINKER_SHLIBS($1)
     _LT_SYS_DYNAMIC_LINKER($1)
     _LT_LINKER_HARDCODE_LIBPATH($1)
 
     _LT_CONFIG($1)
   fi # test -n "$compiler"
 
   GCC=$lt_save_GCC
   CC="$lt_save_CC"
   CFLAGS="$lt_save_CFLAGS"
 fi # test "$_lt_disable_F77" != yes
 
 AC_LANG_POP
 ])# _LT_LANG_F77_CONFIG
 
 
 # _LT_LANG_FC_CONFIG([TAG])
 # -------------------------
 # Ensure that the configuration variables for a Fortran compiler are
 # suitably defined.  These variables are subsequently used by _LT_CONFIG
 # to write the compiler configuration to `libtool'.
 m4_defun([_LT_LANG_FC_CONFIG],
 [AC_LANG_PUSH(Fortran)
 
 if test -z "$FC" || test "X$FC" = "Xno"; then
   _lt_disable_FC=yes
 fi
 
 _LT_TAGVAR(archive_cmds_need_lc, $1)=no
 _LT_TAGVAR(allow_undefined_flag, $1)=
 _LT_TAGVAR(always_export_symbols, $1)=no
 _LT_TAGVAR(archive_expsym_cmds, $1)=
 _LT_TAGVAR(export_dynamic_flag_spec, $1)=
 _LT_TAGVAR(hardcode_direct, $1)=no
 _LT_TAGVAR(hardcode_direct_absolute, $1)=no
 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
 _LT_TAGVAR(hardcode_libdir_separator, $1)=
 _LT_TAGVAR(hardcode_minus_L, $1)=no
 _LT_TAGVAR(hardcode_automatic, $1)=no
 _LT_TAGVAR(inherit_rpath, $1)=no
 _LT_TAGVAR(module_cmds, $1)=
 _LT_TAGVAR(module_expsym_cmds, $1)=
 _LT_TAGVAR(link_all_deplibs, $1)=unknown
 _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
 _LT_TAGVAR(reload_flag, $1)=$reload_flag
 _LT_TAGVAR(reload_cmds, $1)=$reload_cmds
 _LT_TAGVAR(no_undefined_flag, $1)=
 _LT_TAGVAR(whole_archive_flag_spec, $1)=
 _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
 
 # Source file extension for fc test sources.
 ac_ext=${ac_fc_srcext-f}
 
 # Object file extension for compiled fc test sources.
 objext=o
 _LT_TAGVAR(objext, $1)=$objext
 
 # No sense in running all these tests if we already determined that
 # the FC compiler isn't working.  Some variables (like enable_shared)
 # are currently assumed to apply to all compilers on this platform,
 # and will be corrupted by setting them based on a non-working compiler.
 if test "$_lt_disable_FC" != yes; then
   # Code to be used in simple compile tests
   lt_simple_compile_test_code="\
       subroutine t
       return
       end
 "
 
   # Code to be used in simple link tests
   lt_simple_link_test_code="\
       program t
       end
 "
 
   # ltmain only uses $CC for tagged configurations so make sure $CC is set.
   _LT_TAG_COMPILER
 
   # save warnings/boilerplate of simple test code
   _LT_COMPILER_BOILERPLATE
   _LT_LINKER_BOILERPLATE
 
   # Allow CC to be a program name with arguments.
   lt_save_CC="$CC"
   lt_save_GCC=$GCC
   lt_save_CFLAGS=$CFLAGS
   CC=${FC-"f95"}
   CFLAGS=$FCFLAGS
   compiler=$CC
   GCC=$ac_cv_fc_compiler_gnu
 
   _LT_TAGVAR(compiler, $1)=$CC
   _LT_CC_BASENAME([$compiler])
 
   if test -n "$compiler"; then
     AC_MSG_CHECKING([if libtool supports shared libraries])
     AC_MSG_RESULT([$can_build_shared])
 
     AC_MSG_CHECKING([whether to build shared libraries])
     test "$can_build_shared" = "no" && enable_shared=no
 
     # On AIX, shared libraries and static libraries use the same namespace, and
     # are all built from PIC.
     case $host_os in
       aix3*)
         test "$enable_shared" = yes && enable_static=no
         if test -n "$RANLIB"; then
           archive_cmds="$archive_cmds~\$RANLIB \$lib"
           postinstall_cmds='$RANLIB $lib'
         fi
         ;;
       aix[[4-9]]*)
 	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
 	  test "$enable_shared" = yes && enable_static=no
 	fi
         ;;
     esac
     AC_MSG_RESULT([$enable_shared])
 
     AC_MSG_CHECKING([whether to build static libraries])
     # Make sure either enable_shared or enable_static is yes.
     test "$enable_shared" = yes || enable_static=yes
     AC_MSG_RESULT([$enable_static])
 
     _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
     _LT_TAGVAR(LD, $1)="$LD"
 
     ## CAVEAT EMPTOR:
     ## There is no encapsulation within the following macros, do not change
     ## the running order or otherwise move them around unless you know exactly
     ## what you are doing...
     _LT_SYS_HIDDEN_LIBDEPS($1)
     _LT_COMPILER_PIC($1)
     _LT_COMPILER_C_O($1)
     _LT_COMPILER_FILE_LOCKS($1)
     _LT_LINKER_SHLIBS($1)
     _LT_SYS_DYNAMIC_LINKER($1)
     _LT_LINKER_HARDCODE_LIBPATH($1)
 
     _LT_CONFIG($1)
   fi # test -n "$compiler"
 
   GCC=$lt_save_GCC
   CC=$lt_save_CC
   CFLAGS=$lt_save_CFLAGS
 fi # test "$_lt_disable_FC" != yes
 
 AC_LANG_POP
 ])# _LT_LANG_FC_CONFIG
 
 
 # _LT_LANG_GCJ_CONFIG([TAG])
 # --------------------------
 # Ensure that the configuration variables for the GNU Java Compiler compiler
 # are suitably defined.  These variables are subsequently used by _LT_CONFIG
 # to write the compiler configuration to `libtool'.
 m4_defun([_LT_LANG_GCJ_CONFIG],
 [AC_REQUIRE([LT_PROG_GCJ])dnl
 AC_LANG_SAVE
 
 # Source file extension for Java test sources.
 ac_ext=java
 
 # Object file extension for compiled Java test sources.
 objext=o
 _LT_TAGVAR(objext, $1)=$objext
 
 # Code to be used in simple compile tests
 lt_simple_compile_test_code="class foo {}"
 
 # Code to be used in simple link tests
 lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
 
 # ltmain only uses $CC for tagged configurations so make sure $CC is set.
 _LT_TAG_COMPILER
 
 # save warnings/boilerplate of simple test code
 _LT_COMPILER_BOILERPLATE
 _LT_LINKER_BOILERPLATE
 
 # Allow CC to be a program name with arguments.
 lt_save_CC=$CC
 lt_save_CFLAGS=$CFLAGS
 lt_save_GCC=$GCC
 GCC=yes
 CC=${GCJ-"gcj"}
 CFLAGS=$GCJFLAGS
 compiler=$CC
 _LT_TAGVAR(compiler, $1)=$CC
 _LT_TAGVAR(LD, $1)="$LD"
 _LT_CC_BASENAME([$compiler])
 
 # GCJ did not exist at the time GCC didn't implicitly link libc in.
 _LT_TAGVAR(archive_cmds_need_lc, $1)=no
 
 _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
 _LT_TAGVAR(reload_flag, $1)=$reload_flag
 _LT_TAGVAR(reload_cmds, $1)=$reload_cmds
 
 ## CAVEAT EMPTOR:
 ## There is no encapsulation within the following macros, do not change
 ## the running order or otherwise move them around unless you know exactly
 ## what you are doing...
 if test -n "$compiler"; then
   _LT_COMPILER_NO_RTTI($1)
   _LT_COMPILER_PIC($1)
   _LT_COMPILER_C_O($1)
   _LT_COMPILER_FILE_LOCKS($1)
   _LT_LINKER_SHLIBS($1)
   _LT_LINKER_HARDCODE_LIBPATH($1)
 
   _LT_CONFIG($1)
 fi
 
 AC_LANG_RESTORE
 
 GCC=$lt_save_GCC
 CC=$lt_save_CC
 CFLAGS=$lt_save_CFLAGS
 ])# _LT_LANG_GCJ_CONFIG
 
 
 # _LT_LANG_GO_CONFIG([TAG])
 # --------------------------
 # Ensure that the configuration variables for the GNU Go compiler
 # are suitably defined.  These variables are subsequently used by _LT_CONFIG
 # to write the compiler configuration to `libtool'.
 m4_defun([_LT_LANG_GO_CONFIG],
 [AC_REQUIRE([LT_PROG_GO])dnl
 AC_LANG_SAVE
 
 # Source file extension for Go test sources.
 ac_ext=go
 
 # Object file extension for compiled Go test sources.
 objext=o
 _LT_TAGVAR(objext, $1)=$objext
 
 # Code to be used in simple compile tests
 lt_simple_compile_test_code="package main; func main() { }"
 
 # Code to be used in simple link tests
 lt_simple_link_test_code='package main; func main() { }'
 
 # ltmain only uses $CC for tagged configurations so make sure $CC is set.
 _LT_TAG_COMPILER
 
 # save warnings/boilerplate of simple test code
 _LT_COMPILER_BOILERPLATE
 _LT_LINKER_BOILERPLATE
 
 # Allow CC to be a program name with arguments.
 lt_save_CC=$CC
 lt_save_CFLAGS=$CFLAGS
 lt_save_GCC=$GCC
 GCC=yes
 CC=${GOC-"gccgo"}
 CFLAGS=$GOFLAGS
 compiler=$CC
 _LT_TAGVAR(compiler, $1)=$CC
 _LT_TAGVAR(LD, $1)="$LD"
 _LT_CC_BASENAME([$compiler])
 
 # Go did not exist at the time GCC didn't implicitly link libc in.
 _LT_TAGVAR(archive_cmds_need_lc, $1)=no
 
 _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
 _LT_TAGVAR(reload_flag, $1)=$reload_flag
 _LT_TAGVAR(reload_cmds, $1)=$reload_cmds
 
 ## CAVEAT EMPTOR:
 ## There is no encapsulation within the following macros, do not change
 ## the running order or otherwise move them around unless you know exactly
 ## what you are doing...
 if test -n "$compiler"; then
   _LT_COMPILER_NO_RTTI($1)
   _LT_COMPILER_PIC($1)
   _LT_COMPILER_C_O($1)
   _LT_COMPILER_FILE_LOCKS($1)
   _LT_LINKER_SHLIBS($1)
   _LT_LINKER_HARDCODE_LIBPATH($1)
 
   _LT_CONFIG($1)
 fi
 
 AC_LANG_RESTORE
 
 GCC=$lt_save_GCC
 CC=$lt_save_CC
 CFLAGS=$lt_save_CFLAGS
 ])# _LT_LANG_GO_CONFIG
 
 
 # _LT_LANG_RC_CONFIG([TAG])
 # -------------------------
 # Ensure that the configuration variables for the Windows resource compiler
 # are suitably defined.  These variables are subsequently used by _LT_CONFIG
 # to write the compiler configuration to `libtool'.
 m4_defun([_LT_LANG_RC_CONFIG],
 [AC_REQUIRE([LT_PROG_RC])dnl
 AC_LANG_SAVE
 
 # Source file extension for RC test sources.
 ac_ext=rc
 
 # Object file extension for compiled RC test sources.
 objext=o
 _LT_TAGVAR(objext, $1)=$objext
 
 # Code to be used in simple compile tests
 lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
 
 # Code to be used in simple link tests
 lt_simple_link_test_code="$lt_simple_compile_test_code"
 
 # ltmain only uses $CC for tagged configurations so make sure $CC is set.
 _LT_TAG_COMPILER
 
 # save warnings/boilerplate of simple test code
 _LT_COMPILER_BOILERPLATE
 _LT_LINKER_BOILERPLATE
 
 # Allow CC to be a program name with arguments.
 lt_save_CC="$CC"
 lt_save_CFLAGS=$CFLAGS
 lt_save_GCC=$GCC
 GCC=
 CC=${RC-"windres"}
 CFLAGS=
 compiler=$CC
 _LT_TAGVAR(compiler, $1)=$CC
 _LT_CC_BASENAME([$compiler])
 _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
 
 if test -n "$compiler"; then
   :
   _LT_CONFIG($1)
 fi
 
 GCC=$lt_save_GCC
 AC_LANG_RESTORE
 CC=$lt_save_CC
 CFLAGS=$lt_save_CFLAGS
 ])# _LT_LANG_RC_CONFIG
 
 
 # LT_PROG_GCJ
 # -----------
 AC_DEFUN([LT_PROG_GCJ],
 [m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
   [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
     [AC_CHECK_TOOL(GCJ, gcj,)
       test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
       AC_SUBST(GCJFLAGS)])])[]dnl
 ])
 
 # Old name:
 AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
 dnl aclocal-1.4 backwards compatibility:
 dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
 
 
 # LT_PROG_GO
 # ----------
 AC_DEFUN([LT_PROG_GO],
 [AC_CHECK_TOOL(GOC, gccgo,)
 ])
 
 
 # LT_PROG_RC
 # ----------
 AC_DEFUN([LT_PROG_RC],
 [AC_CHECK_TOOL(RC, windres,)
 ])
 
 # Old name:
 AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
 dnl aclocal-1.4 backwards compatibility:
 dnl AC_DEFUN([LT_AC_PROG_RC], [])
 
 
 # _LT_DECL_EGREP
 # --------------
 # If we don't have a new enough Autoconf to choose the best grep
 # available, choose the one first in the user's PATH.
 m4_defun([_LT_DECL_EGREP],
 [AC_REQUIRE([AC_PROG_EGREP])dnl
 AC_REQUIRE([AC_PROG_FGREP])dnl
 test -z "$GREP" && GREP=grep
 _LT_DECL([], [GREP], [1], [A grep program that handles long lines])
 _LT_DECL([], [EGREP], [1], [An ERE matcher])
 _LT_DECL([], [FGREP], [1], [A literal string matcher])
 dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
 AC_SUBST([GREP])
 ])
 
 
 # _LT_DECL_OBJDUMP
 # --------------
 # If we don't have a new enough Autoconf to choose the best objdump
 # available, choose the one first in the user's PATH.
 m4_defun([_LT_DECL_OBJDUMP],
 [AC_CHECK_TOOL(OBJDUMP, objdump, false)
 test -z "$OBJDUMP" && OBJDUMP=objdump
 _LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
 AC_SUBST([OBJDUMP])
 ])
 
 # _LT_DECL_DLLTOOL
 # ----------------
 # Ensure DLLTOOL variable is set.
 m4_defun([_LT_DECL_DLLTOOL],
 [AC_CHECK_TOOL(DLLTOOL, dlltool, false)
 test -z "$DLLTOOL" && DLLTOOL=dlltool
 _LT_DECL([], [DLLTOOL], [1], [DLL creation program])
 AC_SUBST([DLLTOOL])
 ])
 
 # _LT_DECL_SED
 # ------------
 # Check for a fully-functional sed program, that truncates
 # as few characters as possible.  Prefer GNU sed if found.
 m4_defun([_LT_DECL_SED],
 [AC_PROG_SED
 test -z "$SED" && SED=sed
 Xsed="$SED -e 1s/^X//"
 _LT_DECL([], [SED], [1], [A sed program that does not truncate output])
 _LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
     [Sed that helps us avoid accidentally triggering echo(1) options like -n])
 ])# _LT_DECL_SED
 
 m4_ifndef([AC_PROG_SED], [
 ############################################################
 # NOTE: This macro has been submitted for inclusion into   #
 #  GNU Autoconf as AC_PROG_SED.  When it is available in   #
 #  a released version of Autoconf we should remove this    #
 #  macro and use it instead.                               #
 ############################################################
 
 m4_defun([AC_PROG_SED],
 [AC_MSG_CHECKING([for a sed that does not truncate output])
 AC_CACHE_VAL(lt_cv_path_SED,
 [# Loop through the user's path and test for sed and gsed.
 # Then use that list of sed's as ones to test for truncation.
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for lt_ac_prog in sed gsed; do
     for ac_exec_ext in '' $ac_executable_extensions; do
       if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
         lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
       fi
     done
   done
 done
 IFS=$as_save_IFS
 lt_ac_max=0
 lt_ac_count=0
 # Add /usr/xpg4/bin/sed as it is typically found on Solaris
 # along with /bin/sed that truncates output.
 for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
   test ! -f $lt_ac_sed && continue
   cat /dev/null > conftest.in
   lt_ac_count=0
   echo $ECHO_N "0123456789$ECHO_C" >conftest.in
   # Check for GNU sed and select it if it is found.
   if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
     lt_cv_path_SED=$lt_ac_sed
     break
   fi
   while true; do
     cat conftest.in conftest.in >conftest.tmp
     mv conftest.tmp conftest.in
     cp conftest.in conftest.nl
     echo >>conftest.nl
     $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
     cmp -s conftest.out conftest.nl || break
     # 10000 chars as input seems more than enough
     test $lt_ac_count -gt 10 && break
     lt_ac_count=`expr $lt_ac_count + 1`
     if test $lt_ac_count -gt $lt_ac_max; then
       lt_ac_max=$lt_ac_count
       lt_cv_path_SED=$lt_ac_sed
     fi
   done
 done
 ])
 SED=$lt_cv_path_SED
 AC_SUBST([SED])
 AC_MSG_RESULT([$SED])
 ])#AC_PROG_SED
 ])#m4_ifndef
 
 # Old name:
 AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
 dnl aclocal-1.4 backwards compatibility:
 dnl AC_DEFUN([LT_AC_PROG_SED], [])
 
 
 # _LT_CHECK_SHELL_FEATURES
 # ------------------------
 # Find out whether the shell is Bourne or XSI compatible,
 # or has some other useful features.
 m4_defun([_LT_CHECK_SHELL_FEATURES],
 [AC_MSG_CHECKING([whether the shell understands some XSI constructs])
 # Try some XSI features
 xsi_shell=no
 ( _lt_dummy="a/b/c"
   test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
       = c,a/b,b/c, \
     && eval 'test $(( 1 + 1 )) -eq 2 \
     && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
   && xsi_shell=yes
 AC_MSG_RESULT([$xsi_shell])
 _LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
 
 AC_MSG_CHECKING([whether the shell understands "+="])
 lt_shell_append=no
 ( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
     >/dev/null 2>&1 \
   && lt_shell_append=yes
 AC_MSG_RESULT([$lt_shell_append])
 _LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
 
 if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
   lt_unset=unset
 else
   lt_unset=false
 fi
 _LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
 
 # test EBCDIC or ASCII
 case `echo X|tr X '\101'` in
  A) # ASCII based system
     # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
   lt_SP2NL='tr \040 \012'
   lt_NL2SP='tr \015\012 \040\040'
   ;;
  *) # EBCDIC based system
   lt_SP2NL='tr \100 \n'
   lt_NL2SP='tr \r\n \100\100'
   ;;
 esac
 _LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
 _LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
 ])# _LT_CHECK_SHELL_FEATURES
 
 
 # _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
 # ------------------------------------------------------
 # In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
 # '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
 m4_defun([_LT_PROG_FUNCTION_REPLACE],
 [dnl {
 sed -e '/^$1 ()$/,/^} # $1 /c\
 $1 ()\
 {\
 m4_bpatsubsts([$2], [$], [\\], [^\([	 ]\)], [\\\1])
 } # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
   && mv -f "$cfgfile.tmp" "$cfgfile" \
     || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
 test 0 -eq $? || _lt_function_replace_fail=:
 ])
 
 
 # _LT_PROG_REPLACE_SHELLFNS
 # -------------------------
 # Replace existing portable implementations of several shell functions with
 # equivalent extended shell implementations where those features are available..
 m4_defun([_LT_PROG_REPLACE_SHELLFNS],
 [if test x"$xsi_shell" = xyes; then
   _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl
     case ${1} in
       */*) func_dirname_result="${1%/*}${2}" ;;
       *  ) func_dirname_result="${3}" ;;
     esac])
 
   _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl
     func_basename_result="${1##*/}"])
 
   _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl
     case ${1} in
       */*) func_dirname_result="${1%/*}${2}" ;;
       *  ) func_dirname_result="${3}" ;;
     esac
     func_basename_result="${1##*/}"])
 
   _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl
     # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
     # positional parameters, so assign one to ordinary parameter first.
     func_stripname_result=${3}
     func_stripname_result=${func_stripname_result#"${1}"}
     func_stripname_result=${func_stripname_result%"${2}"}])
 
   _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl
     func_split_long_opt_name=${1%%=*}
     func_split_long_opt_arg=${1#*=}])
 
   _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl
     func_split_short_opt_arg=${1#??}
     func_split_short_opt_name=${1%"$func_split_short_opt_arg"}])
 
   _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl
     case ${1} in
       *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
       *)    func_lo2o_result=${1} ;;
     esac])
 
   _LT_PROG_FUNCTION_REPLACE([func_xform], [    func_xform_result=${1%.*}.lo])
 
   _LT_PROG_FUNCTION_REPLACE([func_arith], [    func_arith_result=$(( $[*] ))])
 
   _LT_PROG_FUNCTION_REPLACE([func_len], [    func_len_result=${#1}])
 fi
 
 if test x"$lt_shell_append" = xyes; then
   _LT_PROG_FUNCTION_REPLACE([func_append], [    eval "${1}+=\\${2}"])
 
   _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl
     func_quote_for_eval "${2}"
 dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
     eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
 
   # Save a `func_append' function call where possible by direct use of '+='
   sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
     && mv -f "$cfgfile.tmp" "$cfgfile" \
       || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
   test 0 -eq $? || _lt_function_replace_fail=:
 else
   # Save a `func_append' function call even when '+=' is not available
   sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
     && mv -f "$cfgfile.tmp" "$cfgfile" \
       || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
   test 0 -eq $? || _lt_function_replace_fail=:
 fi
 
 if test x"$_lt_function_replace_fail" = x":"; then
   AC_MSG_WARN([Unable to substitute extended shell functions in $ofile])
 fi
 ])
 
 # _LT_PATH_CONVERSION_FUNCTIONS
 # -----------------------------
 # Determine which file name conversion functions should be used by
 # func_to_host_file (and, implicitly, by func_to_host_path).  These are needed
 # for certain cross-compile configurations and native mingw.
 m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
 AC_REQUIRE([AC_CANONICAL_BUILD])dnl
 AC_MSG_CHECKING([how to convert $build file names to $host format])
 AC_CACHE_VAL(lt_cv_to_host_file_cmd,
 [case $host in
   *-*-mingw* )
     case $build in
       *-*-mingw* ) # actually msys
         lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
         ;;
       *-*-cygwin* )
         lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
         ;;
       * ) # otherwise, assume *nix
         lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
         ;;
     esac
     ;;
   *-*-cygwin* )
     case $build in
       *-*-mingw* ) # actually msys
         lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
         ;;
       *-*-cygwin* )
         lt_cv_to_host_file_cmd=func_convert_file_noop
         ;;
       * ) # otherwise, assume *nix
         lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
         ;;
     esac
     ;;
   * ) # unhandled hosts (and "normal" native builds)
     lt_cv_to_host_file_cmd=func_convert_file_noop
     ;;
 esac
 ])
 to_host_file_cmd=$lt_cv_to_host_file_cmd
 AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
 _LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
          [0], [convert $build file names to $host format])dnl
 
 AC_MSG_CHECKING([how to convert $build file names to toolchain format])
 AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
 [#assume ordinary cross tools, or native build.
 lt_cv_to_tool_file_cmd=func_convert_file_noop
 case $host in
   *-*-mingw* )
     case $build in
       *-*-mingw* ) # actually msys
         lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
         ;;
     esac
     ;;
 esac
 ])
 to_tool_file_cmd=$lt_cv_to_tool_file_cmd
 AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
 _LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
          [0], [convert $build files to toolchain format])dnl
 ])# _LT_PATH_CONVERSION_FUNCTIONS