You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qemu/include/hw/s390x/s390-pci-inst.h

120 lines
4.1 KiB
C

/*
* s390 PCI instruction definitions
*
* Copyright 2014 IBM Corp.
* Author(s): Frank Blaschka <frank.blaschka@de.ibm.com>
* Hong Bo Li <lihbbj@cn.ibm.com>
* Yi Min Zhao <zyimin@cn.ibm.com>
*
* This work is licensed under the terms of the GNU GPL, version 2 or (at
* your option) any later version. See the COPYING file in the top-level
* directory.
*/
#ifndef HW_S390_PCI_INST_H
#define HW_S390_PCI_INST_H
#include "s390-pci-bus.h"
#include "sysemu/dma.h"
/* Load/Store status codes */
#define ZPCI_PCI_ST_FUNC_NOT_ENABLED 4
#define ZPCI_PCI_ST_FUNC_IN_ERR 8
#define ZPCI_PCI_ST_BLOCKED 12
#define ZPCI_PCI_ST_INSUF_RES 16
#define ZPCI_PCI_ST_INVAL_AS 20
#define ZPCI_PCI_ST_FUNC_ALREADY_ENABLED 24
#define ZPCI_PCI_ST_DMA_AS_NOT_ENABLED 28
#define ZPCI_PCI_ST_2ND_OP_IN_INV_AS 36
#define ZPCI_PCI_ST_FUNC_NOT_AVAIL 40
#define ZPCI_PCI_ST_ALREADY_IN_RQ_STATE 44
/* Load/Store return codes */
#define ZPCI_PCI_LS_OK 0
#define ZPCI_PCI_LS_ERR 1
#define ZPCI_PCI_LS_BUSY 2
#define ZPCI_PCI_LS_INVAL_HANDLE 3
/* Modify PCI status codes */
#define ZPCI_MOD_ST_RES_NOT_AVAIL 4
#define ZPCI_MOD_ST_INSUF_RES 16
#define ZPCI_MOD_ST_SEQUENCE 24
#define ZPCI_MOD_ST_DMAAS_INVAL 28
#define ZPCI_MOD_ST_FRAME_INVAL 32
#define ZPCI_MOD_ST_ERROR_RECOVER 40
/* Modify PCI Function Controls */
#define ZPCI_MOD_FC_REG_INT 2
#define ZPCI_MOD_FC_DEREG_INT 3
#define ZPCI_MOD_FC_REG_IOAT 4
#define ZPCI_MOD_FC_DEREG_IOAT 5
#define ZPCI_MOD_FC_REREG_IOAT 6
#define ZPCI_MOD_FC_RESET_ERROR 7
#define ZPCI_MOD_FC_RESET_BLOCK 9
#define ZPCI_MOD_FC_SET_MEASURE 10
/* Store PCI Function Controls status codes */
#define ZPCI_STPCIFC_ST_PERM_ERROR 8
#define ZPCI_STPCIFC_ST_INVAL_DMAAS 28
#define ZPCI_STPCIFC_ST_ERROR_RECOVER 40
/* Refresh PCI Translations status codes */
#define ZPCI_RPCIT_ST_INSUFF_RES 16
/* FIB function controls */
#define ZPCI_FIB_FC_ENABLED 0x80
#define ZPCI_FIB_FC_ERROR 0x40
#define ZPCI_FIB_FC_LS_BLOCKED 0x20
#define ZPCI_FIB_FC_DMAAS_REG 0x10
/* FIB function controls */
#define ZPCI_FIB_FC_ENABLED 0x80
#define ZPCI_FIB_FC_ERROR 0x40
#define ZPCI_FIB_FC_LS_BLOCKED 0x20
#define ZPCI_FIB_FC_DMAAS_REG 0x10
/* Function Information Block */
typedef struct ZpciFib {
uint8_t fmt; /* format */
uint8_t reserved1[7];
uint8_t fc; /* function controls */
uint8_t reserved2;
uint16_t reserved3;
uint32_t reserved4;
uint64_t pba; /* PCI base address */
uint64_t pal; /* PCI address limit */
uint64_t iota; /* I/O Translation Anchor */
#define FIB_DATA_ISC(x) (((x) >> 28) & 0x7)
#define FIB_DATA_NOI(x) (((x) >> 16) & 0xfff)
#define FIB_DATA_AIBVO(x) (((x) >> 8) & 0x3f)
#define FIB_DATA_SUM(x) (((x) >> 7) & 0x1)
#define FIB_DATA_AISBO(x) ((x) & 0x3f)
uint32_t data;
uint32_t reserved5;
uint64_t aibv; /* Adapter int bit vector address */
uint64_t aisb; /* Adapter int summary bit address */
uint64_t fmb_addr; /* Function measurement address and key */
uint32_t reserved6;
uint32_t gd;
} QEMU_PACKED ZpciFib;
int pci_dereg_irqs(S390PCIBusDevice *pbdev);
void pci_dereg_ioat(S390PCIIOMMU *iommu);
int clp_service_call(S390CPU *cpu, uint8_t r2, uintptr_t ra);
int pcilg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2, uintptr_t ra);
int pcistg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2, uintptr_t ra);
int rpcit_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2, uintptr_t ra);
int pcistb_service_call(S390CPU *cpu, uint8_t r1, uint8_t r3, uint64_t gaddr,
uint8_t ar, uintptr_t ra);
int mpcifc_service_call(S390CPU *cpu, uint8_t r1, uint64_t fiba, uint8_t ar,
uintptr_t ra);
int stpcifc_service_call(S390CPU *cpu, uint8_t r1, uint64_t fiba, uint8_t ar,
uintptr_t ra);
void fmb_timer_free(S390PCIBusDevice *pbdev);
#define ZPCI_IO_BAR_MIN 0
#define ZPCI_IO_BAR_MAX 5
#define ZPCI_CONFIG_BAR 15
#endif