qemu/hw/timer/imx_epit.c

/*
 * IMX EPIT Timer
 *
 * Copyright (c) 2008 OK Labs
 * Copyright (c) 2011 NICTA Pty Ltd
 * Originally written by Hans Jiang
 * Updated by Peter Chubb
 * Updated by Jean-Christophe Dubois <jcd@tribudubois.net>
 *
 * This code is licensed under GPL version 2 or later.  See
 * the COPYING file in the top-level directory.
 *
 */

#include "qemu/osdep.h"
#include "hw/timer/imx_epit.h"
#include "migration/vmstate.h"
#include "hw/irq.h"
#include "hw/misc/imx_ccm.h"
#include "qemu/module.h"
#include "qemu/log.h"

#ifndef DEBUG_IMX_EPIT
#define DEBUG_IMX_EPIT 0
#endif

#define DPRINTF(fmt, args...) \
    do { \
        if (DEBUG_IMX_EPIT) { \
            fprintf(stderr, "[%s]%s: " fmt , TYPE_IMX_EPIT, \
                                             __func__, ##args); \
        } \
    } while (0)

static const char *imx_epit_reg_name(uint32_t reg)
{
    switch (reg) {
    case 0:
        return "CR";
    case 1:
        return "SR";
    case 2:
        return "LR";
    case 3:
        return "CMP";
    case 4:
        return "CNT";
    default:
        return "[?]";
    }
}

/*
 * Exact clock frequencies vary from board to board.
 * These are typical.
 */
static const IMXClk imx_epit_clocks[] =  {
    CLK_NONE,      /* 00 disabled */
    CLK_IPG,       /* 01 ipg_clk, ~532MHz */
    CLK_IPG_HIGH,  /* 10 ipg_clk_highfreq */
    CLK_32k,       /* 11 ipg_clk_32k -- ~32kHz */
};

/*
 * Update interrupt status
 */
static void imx_epit_update_int(IMXEPITState *s)
{
    if (s->sr && (s->cr & CR_OCIEN) && (s->cr & CR_EN)) {
        qemu_irq_raise(s->irq);
    } else {
        qemu_irq_lower(s->irq);
    }
}

/*
 * Must be called from within a ptimer_transaction_begin/commit block
 * for both s->timer_cmp and s->timer_reload.
 */
static void imx_epit_set_freq(IMXEPITState *s)
{
    uint32_t clksrc;
    uint32_t prescaler;

    clksrc = extract32(s->cr, CR_CLKSRC_SHIFT, 2);
    prescaler = 1 + extract32(s->cr, CR_PRESCALE_SHIFT, 12);

    s->freq = imx_ccm_get_clock_frequency(s->ccm,
                                imx_epit_clocks[clksrc]) / prescaler;

    DPRINTF("Setting ptimer frequency to %u\n", s->freq);

    if (s->freq) {
        ptimer_set_freq(s->timer_reload, s->freq);
        ptimer_set_freq(s->timer_cmp, s->freq);
    }
}

static void imx_epit_reset(DeviceState *dev)
{
    IMXEPITState *s = IMX_EPIT(dev);

    /*
     * Soft reset doesn't touch some bits; hard reset clears them
     */
    s->cr &= (CR_EN|CR_ENMOD|CR_STOPEN|CR_DOZEN|CR_WAITEN|CR_DBGEN);
    s->sr = 0;
    s->lr = EPIT_TIMER_MAX;
    s->cmp = 0;
    s->cnt = 0;
    ptimer_transaction_begin(s->timer_cmp);
    ptimer_transaction_begin(s->timer_reload);
    /* stop both timers */
    ptimer_stop(s->timer_cmp);
    ptimer_stop(s->timer_reload);
    /* compute new frequency */
    imx_epit_set_freq(s);
    /* init both timers to EPIT_TIMER_MAX */
    ptimer_set_limit(s->timer_cmp, EPIT_TIMER_MAX, 1);
    ptimer_set_limit(s->timer_reload, EPIT_TIMER_MAX, 1);
    if (s->freq && (s->cr & CR_EN)) {
        /* if the timer is still enabled, restart it */
        ptimer_run(s->timer_reload, 0);
    }
    ptimer_transaction_commit(s->timer_cmp);
    ptimer_transaction_commit(s->timer_reload);
}

static uint32_t imx_epit_update_count(IMXEPITState *s)
{
    s->cnt = ptimer_get_count(s->timer_reload);

    return s->cnt;
}

static uint64_t imx_epit_read(void *opaque, hwaddr offset, unsigned size)
{
    IMXEPITState *s = IMX_EPIT(opaque);
    uint32_t reg_value = 0;

    switch (offset >> 2) {
    case 0: /* Control Register */
        reg_value = s->cr;
        break;

    case 1: /* Status Register */
        reg_value = s->sr;
        break;

    case 2: /* LR - ticks*/
        reg_value = s->lr;
        break;

    case 3: /* CMP */
        reg_value = s->cmp;
        break;

    case 4: /* CNT */
        imx_epit_update_count(s);
        reg_value = s->cnt;
        break;

    default:
        qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%"
                      HWADDR_PRIx "\n", TYPE_IMX_EPIT, __func__, offset);
        break;
    }

    DPRINTF("(%s) = 0x%08x\n", imx_epit_reg_name(offset >> 2), reg_value);

    return reg_value;
}

/* Must be called from ptimer_transaction_begin/commit block for s->timer_cmp */
static void imx_epit_reload_compare_timer(IMXEPITState *s)
{
    if ((s->cr & (CR_EN | CR_OCIEN)) == (CR_EN | CR_OCIEN))  {
        /* if the compare feature is on and timers are running */
        uint32_t tmp = imx_epit_update_count(s);
        uint64_t next;
        if (tmp > s->cmp) {
            /* It'll fire in this round of the timer */
            next = tmp - s->cmp;
        } else { /* catch it next time around */
            next = tmp - s->cmp + ((s->cr & CR_RLD) ? EPIT_TIMER_MAX : s->lr);
        }
        ptimer_set_count(s->timer_cmp, next);
    }
}

static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value,
                           unsigned size)
{
    IMXEPITState *s = IMX_EPIT(opaque);
    uint64_t oldcr;

    DPRINTF("(%s, value = 0x%08x)\n", imx_epit_reg_name(offset >> 2),
            (uint32_t)value);

    switch (offset >> 2) {
    case 0: /* CR */

        oldcr = s->cr;
        s->cr = value & 0x03ffffff;
        if (s->cr & CR_SWR) {
            /* handle the reset */
            imx_epit_reset(DEVICE(s));
            /*
             * TODO: could we 'break' here? following operations appear
             * to duplicate the work imx_epit_reset() already did.
             */
        }

        ptimer_transaction_begin(s->timer_cmp);
        ptimer_transaction_begin(s->timer_reload);

        if (!(s->cr & CR_SWR)) {
            imx_epit_set_freq(s);
        }

        if (s->freq && (s->cr & CR_EN) && !(oldcr & CR_EN)) {
            if (s->cr & CR_ENMOD) {
                if (s->cr & CR_RLD) {
                    ptimer_set_limit(s->timer_reload, s->lr, 1);
                    ptimer_set_limit(s->timer_cmp, s->lr, 1);
                } else {
                    ptimer_set_limit(s->timer_reload, EPIT_TIMER_MAX, 1);
                    ptimer_set_limit(s->timer_cmp, EPIT_TIMER_MAX, 1);
                }
            }

            imx_epit_reload_compare_timer(s);
            ptimer_run(s->timer_reload, 0);
            if (s->cr & CR_OCIEN) {
                ptimer_run(s->timer_cmp, 0);
            } else {
                ptimer_stop(s->timer_cmp);
            }
        } else if (!(s->cr & CR_EN)) {
            /* stop both timers */
            ptimer_stop(s->timer_reload);
            ptimer_stop(s->timer_cmp);
        } else  if (s->cr & CR_OCIEN) {
            if (!(oldcr & CR_OCIEN)) {
                imx_epit_reload_compare_timer(s);
                ptimer_run(s->timer_cmp, 0);
            }
        } else {
            ptimer_stop(s->timer_cmp);
        }

        ptimer_transaction_commit(s->timer_cmp);
        ptimer_transaction_commit(s->timer_reload);
        break;

    case 1: /* SR - ACK*/
        /* writing 1 to OCIF clear the OCIF bit */
        if (value & 0x01) {
            s->sr = 0;
            imx_epit_update_int(s);
        }
        break;

    case 2: /* LR - set ticks */
        s->lr = value;

        ptimer_transaction_begin(s->timer_cmp);
        ptimer_transaction_begin(s->timer_reload);
        if (s->cr & CR_RLD) {
            /* Also set the limit if the LRD bit is set */
            /* If IOVW bit is set then set the timer value */
            ptimer_set_limit(s->timer_reload, s->lr, s->cr & CR_IOVW);
            ptimer_set_limit(s->timer_cmp, s->lr, 0);
        } else if (s->cr & CR_IOVW) {
            /* If IOVW bit is set then set the timer value */
            ptimer_set_count(s->timer_reload, s->lr);
        }
        /*
         * Commit the change to s->timer_reload, so it can propagate. Otherwise
         * the timer interrupt may not fire properly. The commit must happen
         * before calling imx_epit_reload_compare_timer(), which reads
         * s->timer_reload internally again.
         */
        ptimer_transaction_commit(s->timer_reload);
        imx_epit_reload_compare_timer(s);
        ptimer_transaction_commit(s->timer_cmp);
        break;

    case 3: /* CMP */
        s->cmp = value;

        ptimer_transaction_begin(s->timer_cmp);
        imx_epit_reload_compare_timer(s);
        ptimer_transaction_commit(s->timer_cmp);

        break;

    default:
        qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%"
                      HWADDR_PRIx "\n", TYPE_IMX_EPIT, __func__, offset);

        break;
    }
}
static void imx_epit_cmp(void *opaque)
{
    IMXEPITState *s = IMX_EPIT(opaque);

    DPRINTF("sr was %d\n", s->sr);

    s->sr = 1;
    imx_epit_update_int(s);
}

static void imx_epit_reload(void *opaque)
{
    /* No action required on rollover of timer_reload */
}

static const MemoryRegionOps imx_epit_ops = {
    .read = imx_epit_read,
    .write = imx_epit_write,
    .endianness = DEVICE_NATIVE_ENDIAN,
};

static const VMStateDescription vmstate_imx_timer_epit = {
    .name = TYPE_IMX_EPIT,
    .version_id = 2,
    .minimum_version_id = 2,
    .fields = (VMStateField[]) {
        VMSTATE_UINT32(cr, IMXEPITState),
        VMSTATE_UINT32(sr, IMXEPITState),
        VMSTATE_UINT32(lr, IMXEPITState),
        VMSTATE_UINT32(cmp, IMXEPITState),
        VMSTATE_UINT32(cnt, IMXEPITState),
        VMSTATE_UINT32(freq, IMXEPITState),
        VMSTATE_PTIMER(timer_reload, IMXEPITState),
        VMSTATE_PTIMER(timer_cmp, IMXEPITState),
        VMSTATE_END_OF_LIST()
    }
};

static void imx_epit_realize(DeviceState *dev, Error **errp)
{
    IMXEPITState *s = IMX_EPIT(dev);
    SysBusDevice *sbd = SYS_BUS_DEVICE(dev);

    DPRINTF("\n");

    sysbus_init_irq(sbd, &s->irq);
    memory_region_init_io(&s->iomem, OBJECT(s), &imx_epit_ops, s, TYPE_IMX_EPIT,
                          0x00001000);
    sysbus_init_mmio(sbd, &s->iomem);

    s->timer_reload = ptimer_init(imx_epit_reload, s, PTIMER_POLICY_LEGACY);

    s->timer_cmp = ptimer_init(imx_epit_cmp, s, PTIMER_POLICY_LEGACY);
}

static void imx_epit_class_init(ObjectClass *klass, void *data)
{
    DeviceClass *dc  = DEVICE_CLASS(klass);

    dc->realize = imx_epit_realize;
    dc->reset = imx_epit_reset;
    dc->vmsd = &vmstate_imx_timer_epit;
    dc->desc = "i.MX periodic timer";
}

static const TypeInfo imx_epit_info = {
    .name = TYPE_IMX_EPIT,
    .parent = TYPE_SYS_BUS_DEVICE,
    .instance_size = sizeof(IMXEPITState),
    .class_init = imx_epit_class_init,
};

static void imx_epit_register_types(void)
{
    type_register_static(&imx_epit_info);
}

type_init(imx_epit_register_types)