forked from mirror/qemu
You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
77 lines
3.4 KiB
ReStructuredText
77 lines
3.4 KiB
ReStructuredText
Managing device boot order with bootindex properties
|
|
====================================================
|
|
|
|
QEMU can tell QEMU-aware guest firmware (like the x86 PC BIOS)
|
|
which order it should look for a bootable OS on which devices.
|
|
A simple way to set this order is to use the ``-boot order=`` option,
|
|
but you can also do this more flexibly, by setting a ``bootindex``
|
|
property on the individual block or net devices you specify
|
|
on the QEMU command line.
|
|
|
|
The ``bootindex`` properties are used to determine the order in which
|
|
firmware will consider devices for booting the guest OS. If the
|
|
``bootindex`` property is not set for a device, it gets the lowest
|
|
boot priority. There is no particular order in which devices with no
|
|
``bootindex`` property set will be considered for booting, but they
|
|
will still be bootable.
|
|
|
|
Some guest machine types (for instance the s390x machines) do
|
|
not support ``-boot order=``; on those machines you must always
|
|
use ``bootindex`` properties.
|
|
|
|
There is no way to set a ``bootindex`` property if you are using
|
|
a short-form option like ``-hda`` or ``-cdrom``, so to use
|
|
``bootindex`` properties you will need to expand out those options
|
|
into long-form ``-drive`` and ``-device`` option pairs.
|
|
|
|
Example
|
|
-------
|
|
|
|
Let's assume we have a QEMU machine with two NICs (virtio, e1000) and two
|
|
disks (IDE, virtio):
|
|
|
|
.. parsed-literal::
|
|
|
|
|qemu_system| -drive file=disk1.img,if=none,id=disk1 \\
|
|
-device ide-hd,drive=disk1,bootindex=4 \\
|
|
-drive file=disk2.img,if=none,id=disk2 \\
|
|
-device virtio-blk-pci,drive=disk2,bootindex=3 \\
|
|
-netdev type=user,id=net0 \\
|
|
-device virtio-net-pci,netdev=net0,bootindex=2 \\
|
|
-netdev type=user,id=net1 \\
|
|
-device e1000,netdev=net1,bootindex=1
|
|
|
|
Given the command above, firmware should try to boot from the e1000 NIC
|
|
first. If this fails, it should try the virtio NIC next; if this fails
|
|
too, it should try the virtio disk, and then the IDE disk.
|
|
|
|
Limitations
|
|
-----------
|
|
|
|
Some firmware has limitations on which devices can be considered for
|
|
booting. For instance, the PC BIOS boot specification allows only one
|
|
disk to be bootable. If boot from disk fails for some reason, the BIOS
|
|
won't retry booting from other disk. It can still try to boot from
|
|
floppy or net, though.
|
|
|
|
Sometimes, firmware cannot map the device path QEMU wants firmware to
|
|
boot from to a boot method. It doesn't happen for devices the firmware
|
|
can natively boot from, but if firmware relies on an option ROM for
|
|
booting, and the same option ROM is used for booting from more then one
|
|
device, the firmware may not be able to ask the option ROM to boot from
|
|
a particular device reliably. For instance with the PC BIOS, if a SCSI HBA
|
|
has three bootable devices target1, target3, target5 connected to it,
|
|
the option ROM will have a boot method for each of them, but it is not
|
|
possible to map from boot method back to a specific target. This is a
|
|
shortcoming of the PC BIOS boot specification.
|
|
|
|
Mixing bootindex and boot order parameters
|
|
------------------------------------------
|
|
|
|
Note that it does not make sense to use the bootindex property together
|
|
with the ``-boot order=...`` (or ``-boot once=...``) parameter. The guest
|
|
firmware implementations normally either support the one or the other,
|
|
but not both parameters at the same time. Mixing them will result in
|
|
undefined behavior, and thus the guest firmware will likely not boot
|
|
from the expected devices.
|