051.out (22044B)
1 QA output created by 051 2 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 3 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT 4 5 === Unknown option === 6 7 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=,if=none,id=drive0 8 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=,if=none,id=drive0: Block format 'qcow2' does not support the option 'unknown_opt' 9 10 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on,if=none,id=drive0 11 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on,if=none,id=drive0: Block format 'qcow2' does not support the option 'unknown_opt' 12 13 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234,if=none,id=drive0 14 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234,if=none,id=drive0: Block format 'qcow2' does not support the option 'unknown_opt' 15 16 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo,if=none,id=drive0 17 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo,if=none,id=drive0: Block format 'qcow2' does not support the option 'unknown_opt' 18 19 20 === Unknown protocol option === 21 22 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt= 23 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=: Block protocol 'file' doesn't support the option 'unknown_opt' 24 25 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=on 26 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=on: Block protocol 'file' doesn't support the option 'unknown_opt' 27 28 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=1234 29 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=1234: Block protocol 'file' doesn't support the option 'unknown_opt' 30 31 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=foo 32 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=foo: Block protocol 'file' doesn't support the option 'unknown_opt' 33 34 35 === Invalid format === 36 37 Testing: -drive file=TEST_DIR/t.qcow2,format=foo 38 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=foo: Unknown driver 'foo' 39 40 Testing: -drive file=TEST_DIR/t.qcow2,driver=foo 41 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=foo: Unknown driver 'foo' 42 43 Testing: -drive file=TEST_DIR/t.qcow2,driver=raw,format=qcow2 44 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=raw,format=qcow2: Cannot specify both 'driver' and 'format' 45 46 Testing: -drive file=TEST_DIR/t.qcow2,driver=qcow2,format=qcow2 47 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=qcow2,format=qcow2: Cannot specify both 'driver' and 'format' 48 49 50 === Node names === 51 52 Testing: -drive file=TEST_DIR/t.qcow2,node-name=x123456789012345678901234567890 53 QEMU X.Y.Z monitor - type 'help' for more information 54 (qemu) quit 55 56 Testing: -drive file=TEST_DIR/t.qcow2,node-name=x1234567890123456789012345678901 57 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,node-name=x1234567890123456789012345678901: Node name too long 58 59 Testing: -drive file=TEST_DIR/t.qcow2,node-name=All-Types.of_all0wed_chars 60 QEMU X.Y.Z monitor - type 'help' for more information 61 (qemu) quit 62 63 Testing: -drive file=TEST_DIR/t.qcow2,node-name=123foo 64 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,node-name=123foo: Invalid node-name: '123foo' 65 66 Testing: -drive file=TEST_DIR/t.qcow2,node-name=_foo 67 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,node-name=_foo: Invalid node-name: '_foo' 68 69 Testing: -drive file=TEST_DIR/t.qcow2,node-name=foo#12 70 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,node-name=foo#12: Invalid node-name: 'foo#12' 71 72 73 === Device without drive === 74 75 Testing: -device virtio-scsi -device scsi-hd 76 QEMU X.Y.Z monitor - type 'help' for more information 77 (qemu) QEMU_PROG: -device scsi-hd: drive property not set 78 79 80 === Overriding backing file === 81 82 Testing: -drive file=TEST_DIR/t.qcow2,driver=qcow2,backing.file.filename=TEST_DIR/t.qcow2.orig,if=none,id=drive0 -nodefaults 83 QEMU X.Y.Z monitor - type 'help' for more information 84 (qemu) info block 85 drive0 (NODE_NAME): json:{"backing": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2.orig"}}, "driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2"}} (qcow2) 86 Removable device: not locked, tray closed 87 Cache mode: writeback 88 Backing file: TEST_DIR/t.qcow2.orig (chain depth: 1) 89 (qemu) quit 90 91 Testing: -drive file=TEST_DIR/t.qcow2,driver=raw,backing.file.filename=TEST_DIR/t.qcow2.orig 92 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=raw,backing.file.filename=TEST_DIR/t.qcow2.orig: Driver doesn't support backing files 93 94 Testing: -drive file=TEST_DIR/t.qcow2,file.backing.driver=file,file.backing.filename=TEST_DIR/t.qcow2.orig 95 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.backing.driver=file,file.backing.filename=TEST_DIR/t.qcow2.orig: Driver doesn't support backing files 96 97 Testing: -drive file=TEST_DIR/t.qcow2,file.backing.driver=qcow2,file.backing.file.filename=TEST_DIR/t.qcow2.orig 98 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.backing.driver=qcow2,file.backing.file.filename=TEST_DIR/t.qcow2.orig: Driver doesn't support backing files 99 100 101 === Enable and disable lazy refcounting on the command line, plus some invalid values === 102 103 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 104 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on 105 QEMU X.Y.Z monitor - type 'help' for more information 106 (qemu) quit 107 108 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=off 109 QEMU X.Y.Z monitor - type 'help' for more information 110 (qemu) quit 111 112 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts= 113 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=: Parameter 'lazy-refcounts' expects 'on' or 'off' 114 115 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=42 116 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=42: Parameter 'lazy-refcounts' expects 'on' or 'off' 117 118 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=foo 119 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=foo: Parameter 'lazy-refcounts' expects 'on' or 'off' 120 121 122 === With version 2 images enabling lazy refcounts must fail === 123 124 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 125 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on 126 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on: Lazy refcounts require a qcow2 image with at least qemu 1.1 compatibility level 127 128 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=off 129 QEMU X.Y.Z monitor - type 'help' for more information 130 (qemu) quit 131 132 133 === No medium === 134 135 Testing: -drive if=virtio 136 QEMU X.Y.Z monitor - type 'help' for more information 137 (qemu) QEMU_PROG: -drive if=virtio: Device needs media, but drive is empty 138 139 140 === Attach to node in non-default iothread === 141 142 143 === Read-only === 144 145 Testing: -drive file=TEST_DIR/t.qcow2,if=virtio,readonly=on 146 QEMU X.Y.Z monitor - type 'help' for more information 147 (qemu) quit 148 149 150 === Cache modes === 151 152 Testing: -drive driver=null-co,read-zeroes=on,cache=none 153 QEMU X.Y.Z monitor - type 'help' for more information 154 (qemu) quit 155 156 Testing: -drive driver=null-co,read-zeroes=on,cache=directsync 157 QEMU X.Y.Z monitor - type 'help' for more information 158 (qemu) quit 159 160 Testing: -drive driver=null-co,read-zeroes=on,cache=writeback 161 QEMU X.Y.Z monitor - type 'help' for more information 162 (qemu) quit 163 164 Testing: -drive driver=null-co,read-zeroes=on,cache=writethrough 165 QEMU X.Y.Z monitor - type 'help' for more information 166 (qemu) quit 167 168 Testing: -drive driver=null-co,read-zeroes=on,cache=unsafe 169 QEMU X.Y.Z monitor - type 'help' for more information 170 (qemu) quit 171 172 Testing: -drive driver=null-co,cache=invalid_value 173 QEMU_PROG: -drive driver=null-co,cache=invalid_value: invalid cache option 174 175 Testing: -drive file=TEST_DIR/t.qcow2,cache=writeback,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults 176 QEMU X.Y.Z monitor - type 'help' for more information 177 (qemu) info block 178 drive0 (NODE_NAME): json:{"backing": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2.base"}}, "driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2"}} (qcow2) 179 Removable device: not locked, tray closed 180 Cache mode: writeback 181 Backing file: TEST_DIR/t.qcow2.base (chain depth: 1) 182 (qemu) info block file 183 184 file: TEST_DIR/t.qcow2 (file) 185 Cache mode: writeback 186 (qemu) info block backing 187 backing: TEST_DIR/t.qcow2.base (qcow2, read-only) 188 Cache mode: writeback, ignore flushes 189 (qemu) info block backing-file 190 191 backing-file: TEST_DIR/t.qcow2.base (file, read-only) 192 Cache mode: writeback, ignore flushes 193 (qemu) quit 194 195 Testing: -drive file=TEST_DIR/t.qcow2,cache=writethrough,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults 196 QEMU X.Y.Z monitor - type 'help' for more information 197 (qemu) info block 198 drive0 (NODE_NAME): json:{"backing": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2.base"}}, "driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2"}} (qcow2) 199 Removable device: not locked, tray closed 200 Cache mode: writethrough 201 Backing file: TEST_DIR/t.qcow2.base (chain depth: 1) 202 (qemu) info block file 203 204 file: TEST_DIR/t.qcow2 (file) 205 Cache mode: writeback 206 (qemu) info block backing 207 backing: TEST_DIR/t.qcow2.base (qcow2, read-only) 208 Cache mode: writeback, ignore flushes 209 (qemu) info block backing-file 210 211 backing-file: TEST_DIR/t.qcow2.base (file, read-only) 212 Cache mode: writeback, ignore flushes 213 (qemu) quit 214 215 Testing: -drive file=TEST_DIR/t.qcow2,cache=unsafe,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults 216 QEMU X.Y.Z monitor - type 'help' for more information 217 (qemu) info block 218 drive0 (NODE_NAME): json:{"backing": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2.base"}}, "driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2"}} (qcow2) 219 Removable device: not locked, tray closed 220 Cache mode: writeback, ignore flushes 221 Backing file: TEST_DIR/t.qcow2.base (chain depth: 1) 222 (qemu) info block file 223 224 file: TEST_DIR/t.qcow2 (file) 225 Cache mode: writeback, ignore flushes 226 (qemu) info block backing 227 backing: TEST_DIR/t.qcow2.base (qcow2, read-only) 228 Cache mode: writeback, ignore flushes 229 (qemu) info block backing-file 230 231 backing-file: TEST_DIR/t.qcow2.base (file, read-only) 232 Cache mode: writeback, ignore flushes 233 (qemu) quit 234 235 Testing: -drive file=TEST_DIR/t.qcow2,cache=invalid_value,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults 236 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,cache=invalid_value,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0: invalid cache option 237 238 239 === Specifying the protocol layer === 240 241 Testing: -drive file=TEST_DIR/t.qcow2,file.driver=file 242 QEMU X.Y.Z monitor - type 'help' for more information 243 (qemu) quit 244 245 246 === Leaving out required options === 247 248 Testing: -drive driver=file 249 QEMU_PROG: -drive driver=file: The 'file' block driver requires a file name 250 251 Testing: -drive driver=file,filename= 252 QEMU_PROG: -drive driver=file,filename=: The 'file' block driver requires a file name 253 254 Testing: -drive driver=nbd 255 QEMU_PROG: -drive driver=nbd: NBD server address missing 256 257 Testing: -drive driver=raw 258 QEMU_PROG: -drive driver=raw: A block device must be specified for "file" 259 260 Testing: -drive file.driver=file 261 QEMU_PROG: -drive file.driver=file: The 'file' block driver requires a file name 262 263 Testing: -drive file.driver=nbd 264 QEMU_PROG: -drive file.driver=nbd: NBD server address missing 265 266 Testing: -drive file.driver=raw 267 QEMU_PROG: -drive file.driver=raw: A block device must be specified for "file" 268 269 Testing: -drive foo=bar 270 QEMU_PROG: -drive foo=bar: Must specify either driver or file 271 272 273 === Specifying both an option and its legacy alias === 274 275 Testing: -drive file=TEST_DIR/t.qcow2,iops=1234,throttling.iops-total=5678 276 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops=1234,throttling.iops-total=5678: 'throttling.iops-total' and its alias 'iops' can't be used at the same time 277 278 Testing: -drive file=TEST_DIR/t.qcow2,iops_rd=1234,throttling.iops-read=5678 279 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_rd=1234,throttling.iops-read=5678: 'throttling.iops-read' and its alias 'iops_rd' can't be used at the same time 280 281 Testing: -drive file=TEST_DIR/t.qcow2,iops_wr=1234,throttling.iops-write=5678 282 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_wr=1234,throttling.iops-write=5678: 'throttling.iops-write' and its alias 'iops_wr' can't be used at the same time 283 284 Testing: -drive file=TEST_DIR/t.qcow2,bps=1234,throttling.bps-total=5678 285 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=1234,throttling.bps-total=5678: 'throttling.bps-total' and its alias 'bps' can't be used at the same time 286 287 Testing: -drive file=TEST_DIR/t.qcow2,bps_rd=1234,throttling.bps-read=5678 288 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd=1234,throttling.bps-read=5678: 'throttling.bps-read' and its alias 'bps_rd' can't be used at the same time 289 290 Testing: -drive file=TEST_DIR/t.qcow2,bps_wr=1234,throttling.bps-write=5678 291 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_wr=1234,throttling.bps-write=5678: 'throttling.bps-write' and its alias 'bps_wr' can't be used at the same time 292 293 Testing: -drive file=TEST_DIR/t.qcow2,iops_max=1234,throttling.iops-total-max=5678 294 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_max=1234,throttling.iops-total-max=5678: 'throttling.iops-total-max' and its alias 'iops_max' can't be used at the same time 295 296 Testing: -drive file=TEST_DIR/t.qcow2,iops_rd_max=1234,throttling.iops-read-max=5678 297 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_rd_max=1234,throttling.iops-read-max=5678: 'throttling.iops-read-max' and its alias 'iops_rd_max' can't be used at the same time 298 299 Testing: -drive file=TEST_DIR/t.qcow2,iops_wr_max=1234,throttling.iops-write-max=5678 300 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_wr_max=1234,throttling.iops-write-max=5678: 'throttling.iops-write-max' and its alias 'iops_wr_max' can't be used at the same time 301 302 Testing: -drive file=TEST_DIR/t.qcow2,bps_max=1234,throttling.bps-total-max=5678 303 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_max=1234,throttling.bps-total-max=5678: 'throttling.bps-total-max' and its alias 'bps_max' can't be used at the same time 304 305 Testing: -drive file=TEST_DIR/t.qcow2,bps_rd_max=1234,throttling.bps-read-max=5678 306 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd_max=1234,throttling.bps-read-max=5678: 'throttling.bps-read-max' and its alias 'bps_rd_max' can't be used at the same time 307 308 Testing: -drive file=TEST_DIR/t.qcow2,bps_wr_max=1234,throttling.bps-write-max=5678 309 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_wr_max=1234,throttling.bps-write-max=5678: 'throttling.bps-write-max' and its alias 'bps_wr_max' can't be used at the same time 310 311 Testing: -drive file=TEST_DIR/t.qcow2,iops_size=1234,throttling.iops-size=5678 312 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_size=1234,throttling.iops-size=5678: 'throttling.iops-size' and its alias 'iops_size' can't be used at the same time 313 314 Testing: -drive file=TEST_DIR/t.qcow2,readonly=on,read-only=off 315 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,readonly=on,read-only=off: 'read-only' and its alias 'readonly' can't be used at the same time 316 317 318 === Catching negative/large throttling values === 319 320 Testing: -drive file=TEST_DIR/t.qcow2,iops=-1 321 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops=-1: bps/iops/max values must be within [0, 1000000000000000] 322 323 Testing: -drive file=TEST_DIR/t.qcow2,bps=-2 324 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=-2: bps/iops/max values must be within [0, 1000000000000000] 325 326 Testing: -drive file=TEST_DIR/t.qcow2,bps_rd=-3 327 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd=-3: bps/iops/max values must be within [0, 1000000000000000] 328 329 Testing: -drive file=TEST_DIR/t.qcow2,bps_rd_max=-3 330 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd_max=-3: bps/iops/max values must be within [0, 1000000000000000] 331 332 Testing: -drive file=TEST_DIR/t.qcow2,throttling.iops-total=-4 333 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,throttling.iops-total=-4: bps/iops/max values must be within [0, 1000000000000000] 334 335 Testing: -drive file=TEST_DIR/t.qcow2,throttling.bps-total=-5 336 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,throttling.bps-total=-5: bps/iops/max values must be within [0, 1000000000000000] 337 338 Testing: -drive file=TEST_DIR/t.qcow2,bps=0 339 QEMU X.Y.Z monitor - type 'help' for more information 340 (qemu) quit 341 342 Testing: -drive file=TEST_DIR/t.qcow2,bps=1 343 QEMU X.Y.Z monitor - type 'help' for more information 344 (qemu) quit 345 346 Testing: -drive file=TEST_DIR/t.qcow2,bps=1000000000000000 347 QEMU X.Y.Z monitor - type 'help' for more information 348 (qemu) quit 349 350 Testing: -drive file=TEST_DIR/t.qcow2,bps=1000000000000001 351 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=1000000000000001: bps/iops/max values must be within [0, 1000000000000000] 352 353 Testing: -drive file=TEST_DIR/t.qcow2,bps=9999999999999999 354 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=9999999999999999: bps/iops/max values must be within [0, 1000000000000000] 355 356 357 === Parsing protocol from file name === 358 359 Testing: -hda foo:bar 360 QEMU_PROG: -hda foo:bar: Unknown protocol 'foo' 361 362 Testing: -drive file=foo:bar 363 QEMU_PROG: -drive file=foo:bar: Unknown protocol 'foo' 364 365 Testing: -drive file.filename=foo:bar 366 QEMU_PROG: -drive file.filename=foo:bar: Could not open 'foo:bar': No such file or directory 367 368 Testing: -hda file:TEST_DIR/t.qcow2 369 QEMU X.Y.Z monitor - type 'help' for more information 370 (qemu) quit 371 372 Testing: -drive file=file:TEST_DIR/t.qcow2 373 QEMU X.Y.Z monitor - type 'help' for more information 374 (qemu) quit 375 376 Testing: -drive file.filename=file:TEST_DIR/t.qcow2 377 QEMU_PROG: -drive file.filename=file:TEST_DIR/t.qcow2: Could not open 'file:TEST_DIR/t.qcow2': No such file or directory 378 379 380 === Snapshot mode === 381 382 wrote 4096/4096 bytes at offset 0 383 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) 384 Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=drive0 -snapshot 385 QEMU X.Y.Z monitor - type 'help' for more information 386 (qemu) qemu-io drive0 "write -P 0x22 0 4k" 387 wrote 4096/4096 bytes at offset 0 388 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) 389 (qemu) quit 390 391 Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0 392 QEMU X.Y.Z monitor - type 'help' for more information 393 (qemu) qemu-io drive0 "write -P 0x22 0 4k" 394 wrote 4096/4096 bytes at offset 0 395 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) 396 (qemu) quit 397 398 Testing: -drive file.filename=TEST_DIR/t.qcow2,driver=qcow2,snapshot=on,if=none,id=drive0 399 QEMU X.Y.Z monitor - type 'help' for more information 400 (qemu) qemu-io drive0 "write -P 0x22 0 4k" 401 wrote 4096/4096 bytes at offset 0 402 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) 403 (qemu) quit 404 405 Testing: -drive file.filename=TEST_DIR/t.qcow2,driver=qcow2,if=none,id=drive0 -snapshot 406 QEMU X.Y.Z monitor - type 'help' for more information 407 (qemu) qemu-io drive0 "write -P 0x22 0 4k" 408 wrote 4096/4096 bytes at offset 0 409 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) 410 (qemu) quit 411 412 Testing: -drive file=file:TEST_DIR/t.qcow2,if=none,id=drive0 -snapshot 413 QEMU X.Y.Z monitor - type 'help' for more information 414 (qemu) qemu-io drive0 "write -P 0x22 0 4k" 415 wrote 4096/4096 bytes at offset 0 416 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) 417 (qemu) quit 418 419 Testing: -drive file=file:TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0 420 QEMU X.Y.Z monitor - type 'help' for more information 421 (qemu) qemu-io drive0 "write -P 0x22 0 4k" 422 wrote 4096/4096 bytes at offset 0 423 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) 424 (qemu) quit 425 426 Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=drive0 -snapshot 427 QEMU X.Y.Z monitor - type 'help' for more information 428 (qemu) qemu-io drive0 "write -P 0x22 0 4k" 429 wrote 4096/4096 bytes at offset 0 430 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) 431 (qemu) quit 432 433 Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0 434 QEMU X.Y.Z monitor - type 'help' for more information 435 (qemu) qemu-io drive0 "write -P 0x22 0 4k" 436 wrote 4096/4096 bytes at offset 0 437 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) 438 (qemu) quit 439 440 read 4096/4096 bytes at offset 0 441 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) 442 Testing: -drive file=TEST_DIR/t.qcow2,snapshot=off,if=none,id=drive0 443 QEMU X.Y.Z monitor - type 'help' for more information 444 (qemu) qemu-io drive0 "write -P 0x22 0 4k" 445 wrote 4096/4096 bytes at offset 0 446 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) 447 (qemu) quit 448 449 read 4096/4096 bytes at offset 0 450 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) 451 Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0 452 QEMU X.Y.Z monitor - type 'help' for more information 453 (qemu) qemu-io drive0 "write -P 0x33 0 4k" 454 wrote 4096/4096 bytes at offset 0 455 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) 456 (qemu) commit drive0 457 (qemu) quit 458 459 read 4096/4096 bytes at offset 0 460 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) 461 Testing: -drive driver=null-co,snapshot=on 462 QEMU_PROG: -drive driver=null-co,snapshot=on: Could not open temporary file SNAPSHOT_PATH: No such file or directory 463 464 Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on,read-only=on,if=none,id=drive0 465 QEMU X.Y.Z monitor - type 'help' for more information 466 (qemu) info block 467 drive0 (NODE_NAME): json:{"backing": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2"}}, "driver": "qcow2", "file": {"driver": "file", "filename": SNAPSHOT_PATH}} (qcow2, read-only) 468 Removable device: not locked, tray closed 469 Cache mode: writeback, ignore flushes 470 Backing file: TEST_DIR/t.qcow2 (chain depth: 1) 471 (qemu) quit 472 473 *** done