e500.c (43183B)
1 /* 2 * QEMU PowerPC e500-based platforms 3 * 4 * Copyright (C) 2009 Freescale Semiconductor, Inc. All rights reserved. 5 * 6 * Author: Yu Liu, <yu.liu@freescale.com> 7 * 8 * This file is derived from hw/ppc440_bamboo.c, 9 * the copyright for that material belongs to the original owners. 10 * 11 * This is free software; you can redistribute it and/or modify 12 * it under the terms of the GNU General Public License as published by 13 * the Free Software Foundation; either version 2 of the License, or 14 * (at your option) any later version. 15 */ 16 17 #include "qemu/osdep.h" 18 #include "qemu/datadir.h" 19 #include "qemu/units.h" 20 #include "qemu/guest-random.h" 21 #include "qapi/error.h" 22 #include "e500.h" 23 #include "e500-ccsr.h" 24 #include "net/net.h" 25 #include "qemu/config-file.h" 26 #include "hw/block/flash.h" 27 #include "hw/char/serial.h" 28 #include "hw/pci/pci.h" 29 #include "sysemu/block-backend-io.h" 30 #include "sysemu/sysemu.h" 31 #include "sysemu/kvm.h" 32 #include "sysemu/reset.h" 33 #include "sysemu/runstate.h" 34 #include "kvm_ppc.h" 35 #include "sysemu/device_tree.h" 36 #include "hw/ppc/openpic.h" 37 #include "hw/ppc/openpic_kvm.h" 38 #include "hw/ppc/ppc.h" 39 #include "hw/qdev-properties.h" 40 #include "hw/loader.h" 41 #include "elf.h" 42 #include "hw/sysbus.h" 43 #include "qemu/host-utils.h" 44 #include "qemu/option.h" 45 #include "hw/pci-host/ppce500.h" 46 #include "qemu/error-report.h" 47 #include "hw/platform-bus.h" 48 #include "hw/net/fsl_etsec/etsec.h" 49 #include "hw/i2c/i2c.h" 50 #include "hw/irq.h" 51 52 #define EPAPR_MAGIC (0x45504150) 53 #define DTC_LOAD_PAD 0x1800000 54 #define DTC_PAD_MASK 0xFFFFF 55 #define DTB_MAX_SIZE (8 * MiB) 56 #define INITRD_LOAD_PAD 0x2000000 57 #define INITRD_PAD_MASK 0xFFFFFF 58 59 #define RAM_SIZES_ALIGN (64 * MiB) 60 61 /* TODO: parameterize */ 62 #define MPC8544_CCSRBAR_SIZE 0x00100000ULL 63 #define MPC8544_MPIC_REGS_OFFSET 0x40000ULL 64 #define MPC8544_MSI_REGS_OFFSET 0x41600ULL 65 #define MPC8544_SERIAL0_REGS_OFFSET 0x4500ULL 66 #define MPC8544_SERIAL1_REGS_OFFSET 0x4600ULL 67 #define MPC8544_PCI_REGS_OFFSET 0x8000ULL 68 #define MPC8544_PCI_REGS_SIZE 0x1000ULL 69 #define MPC8544_UTIL_OFFSET 0xe0000ULL 70 #define MPC8XXX_GPIO_OFFSET 0x000FF000ULL 71 #define MPC8544_I2C_REGS_OFFSET 0x3000ULL 72 #define MPC8XXX_GPIO_IRQ 47 73 #define MPC8544_I2C_IRQ 43 74 #define RTC_REGS_OFFSET 0x68 75 76 #define PLATFORM_CLK_FREQ_HZ (400 * 1000 * 1000) 77 78 struct boot_info 79 { 80 uint32_t dt_base; 81 uint32_t dt_size; 82 uint32_t entry; 83 }; 84 85 static uint32_t *pci_map_create(void *fdt, uint32_t mpic, int first_slot, 86 int nr_slots, int *len) 87 { 88 int i = 0; 89 int slot; 90 int pci_irq; 91 int host_irq; 92 int last_slot = first_slot + nr_slots; 93 uint32_t *pci_map; 94 95 *len = nr_slots * 4 * 7 * sizeof(uint32_t); 96 pci_map = g_malloc(*len); 97 98 for (slot = first_slot; slot < last_slot; slot++) { 99 for (pci_irq = 0; pci_irq < 4; pci_irq++) { 100 pci_map[i++] = cpu_to_be32(slot << 11); 101 pci_map[i++] = cpu_to_be32(0x0); 102 pci_map[i++] = cpu_to_be32(0x0); 103 pci_map[i++] = cpu_to_be32(pci_irq + 1); 104 pci_map[i++] = cpu_to_be32(mpic); 105 host_irq = ppce500_pci_map_irq_slot(slot, pci_irq); 106 pci_map[i++] = cpu_to_be32(host_irq + 1); 107 pci_map[i++] = cpu_to_be32(0x1); 108 } 109 } 110 111 assert((i * sizeof(uint32_t)) == *len); 112 113 return pci_map; 114 } 115 116 static void dt_serial_create(void *fdt, unsigned long long offset, 117 const char *soc, const char *mpic, 118 const char *alias, int idx, bool defcon) 119 { 120 char *ser; 121 122 ser = g_strdup_printf("%s/serial@%llx", soc, offset); 123 qemu_fdt_add_subnode(fdt, ser); 124 qemu_fdt_setprop_string(fdt, ser, "device_type", "serial"); 125 qemu_fdt_setprop_string(fdt, ser, "compatible", "ns16550"); 126 qemu_fdt_setprop_cells(fdt, ser, "reg", offset, 0x100); 127 qemu_fdt_setprop_cell(fdt, ser, "cell-index", idx); 128 qemu_fdt_setprop_cell(fdt, ser, "clock-frequency", PLATFORM_CLK_FREQ_HZ); 129 qemu_fdt_setprop_cells(fdt, ser, "interrupts", 42, 2); 130 qemu_fdt_setprop_phandle(fdt, ser, "interrupt-parent", mpic); 131 qemu_fdt_setprop_string(fdt, "/aliases", alias, ser); 132 133 if (defcon) { 134 /* 135 * "linux,stdout-path" and "stdout" properties are deprecated by linux 136 * kernel. New platforms should only use the "stdout-path" property. Set 137 * the new property and continue using older property to remain 138 * compatible with the existing firmware. 139 */ 140 qemu_fdt_setprop_string(fdt, "/chosen", "linux,stdout-path", ser); 141 qemu_fdt_setprop_string(fdt, "/chosen", "stdout-path", ser); 142 } 143 g_free(ser); 144 } 145 146 static void create_dt_mpc8xxx_gpio(void *fdt, const char *soc, const char *mpic) 147 { 148 hwaddr mmio0 = MPC8XXX_GPIO_OFFSET; 149 int irq0 = MPC8XXX_GPIO_IRQ; 150 gchar *node = g_strdup_printf("%s/gpio@%"PRIx64, soc, mmio0); 151 gchar *poweroff = g_strdup_printf("%s/power-off", soc); 152 int gpio_ph; 153 154 qemu_fdt_add_subnode(fdt, node); 155 qemu_fdt_setprop_string(fdt, node, "compatible", "fsl,qoriq-gpio"); 156 qemu_fdt_setprop_cells(fdt, node, "reg", mmio0, 0x1000); 157 qemu_fdt_setprop_cells(fdt, node, "interrupts", irq0, 0x2); 158 qemu_fdt_setprop_phandle(fdt, node, "interrupt-parent", mpic); 159 qemu_fdt_setprop_cells(fdt, node, "#gpio-cells", 2); 160 qemu_fdt_setprop(fdt, node, "gpio-controller", NULL, 0); 161 gpio_ph = qemu_fdt_alloc_phandle(fdt); 162 qemu_fdt_setprop_cell(fdt, node, "phandle", gpio_ph); 163 qemu_fdt_setprop_cell(fdt, node, "linux,phandle", gpio_ph); 164 165 /* Power Off Pin */ 166 qemu_fdt_add_subnode(fdt, poweroff); 167 qemu_fdt_setprop_string(fdt, poweroff, "compatible", "gpio-poweroff"); 168 qemu_fdt_setprop_cells(fdt, poweroff, "gpios", gpio_ph, 0, 0); 169 170 g_free(node); 171 g_free(poweroff); 172 } 173 174 static void dt_rtc_create(void *fdt, const char *i2c, const char *alias) 175 { 176 int offset = RTC_REGS_OFFSET; 177 178 gchar *rtc = g_strdup_printf("%s/rtc@%"PRIx32, i2c, offset); 179 qemu_fdt_add_subnode(fdt, rtc); 180 qemu_fdt_setprop_string(fdt, rtc, "compatible", "pericom,pt7c4338"); 181 qemu_fdt_setprop_cells(fdt, rtc, "reg", offset); 182 qemu_fdt_setprop_string(fdt, "/aliases", alias, rtc); 183 184 g_free(rtc); 185 } 186 187 static void dt_i2c_create(void *fdt, const char *soc, const char *mpic, 188 const char *alias) 189 { 190 hwaddr mmio0 = MPC8544_I2C_REGS_OFFSET; 191 int irq0 = MPC8544_I2C_IRQ; 192 193 gchar *i2c = g_strdup_printf("%s/i2c@%"PRIx64, soc, mmio0); 194 qemu_fdt_add_subnode(fdt, i2c); 195 qemu_fdt_setprop_string(fdt, i2c, "device_type", "i2c"); 196 qemu_fdt_setprop_string(fdt, i2c, "compatible", "fsl-i2c"); 197 qemu_fdt_setprop_cells(fdt, i2c, "reg", mmio0, 0x14); 198 qemu_fdt_setprop_cells(fdt, i2c, "cell-index", 0); 199 qemu_fdt_setprop_cells(fdt, i2c, "interrupts", irq0, 0x2); 200 qemu_fdt_setprop_phandle(fdt, i2c, "interrupt-parent", mpic); 201 qemu_fdt_setprop_string(fdt, "/aliases", alias, i2c); 202 203 g_free(i2c); 204 } 205 206 207 typedef struct PlatformDevtreeData { 208 void *fdt; 209 const char *mpic; 210 int irq_start; 211 const char *node; 212 PlatformBusDevice *pbus; 213 } PlatformDevtreeData; 214 215 static int create_devtree_etsec(SysBusDevice *sbdev, PlatformDevtreeData *data) 216 { 217 eTSEC *etsec = ETSEC_COMMON(sbdev); 218 PlatformBusDevice *pbus = data->pbus; 219 hwaddr mmio0 = platform_bus_get_mmio_addr(pbus, sbdev, 0); 220 int irq0 = platform_bus_get_irqn(pbus, sbdev, 0); 221 int irq1 = platform_bus_get_irqn(pbus, sbdev, 1); 222 int irq2 = platform_bus_get_irqn(pbus, sbdev, 2); 223 gchar *node = g_strdup_printf("/platform/ethernet@%"PRIx64, mmio0); 224 gchar *group = g_strdup_printf("%s/queue-group", node); 225 void *fdt = data->fdt; 226 227 assert((int64_t)mmio0 >= 0); 228 assert(irq0 >= 0); 229 assert(irq1 >= 0); 230 assert(irq2 >= 0); 231 232 qemu_fdt_add_subnode(fdt, node); 233 qemu_fdt_setprop(fdt, node, "ranges", NULL, 0); 234 qemu_fdt_setprop_string(fdt, node, "device_type", "network"); 235 qemu_fdt_setprop_string(fdt, node, "compatible", "fsl,etsec2"); 236 qemu_fdt_setprop_string(fdt, node, "model", "eTSEC"); 237 qemu_fdt_setprop(fdt, node, "local-mac-address", etsec->conf.macaddr.a, 6); 238 qemu_fdt_setprop_cells(fdt, node, "fixed-link", 0, 1, 1000, 0, 0); 239 qemu_fdt_setprop_cells(fdt, node, "#size-cells", 1); 240 qemu_fdt_setprop_cells(fdt, node, "#address-cells", 1); 241 242 qemu_fdt_add_subnode(fdt, group); 243 qemu_fdt_setprop_cells(fdt, group, "reg", mmio0, 0x1000); 244 qemu_fdt_setprop_cells(fdt, group, "interrupts", 245 data->irq_start + irq0, 0x2, 246 data->irq_start + irq1, 0x2, 247 data->irq_start + irq2, 0x2); 248 249 g_free(node); 250 g_free(group); 251 252 return 0; 253 } 254 255 static void sysbus_device_create_devtree(SysBusDevice *sbdev, void *opaque) 256 { 257 PlatformDevtreeData *data = opaque; 258 bool matched = false; 259 260 if (object_dynamic_cast(OBJECT(sbdev), TYPE_ETSEC_COMMON)) { 261 create_devtree_etsec(sbdev, data); 262 matched = true; 263 } 264 265 if (!matched) { 266 error_report("Device %s is not supported by this machine yet.", 267 qdev_fw_name(DEVICE(sbdev))); 268 exit(1); 269 } 270 } 271 272 static void create_devtree_flash(SysBusDevice *sbdev, 273 PlatformDevtreeData *data) 274 { 275 g_autofree char *name = NULL; 276 uint64_t num_blocks = object_property_get_uint(OBJECT(sbdev), 277 "num-blocks", 278 &error_fatal); 279 uint64_t sector_length = object_property_get_uint(OBJECT(sbdev), 280 "sector-length", 281 &error_fatal); 282 uint64_t bank_width = object_property_get_uint(OBJECT(sbdev), 283 "width", 284 &error_fatal); 285 hwaddr flashbase = 0; 286 hwaddr flashsize = num_blocks * sector_length; 287 void *fdt = data->fdt; 288 289 name = g_strdup_printf("%s/nor@%" PRIx64, data->node, flashbase); 290 qemu_fdt_add_subnode(fdt, name); 291 qemu_fdt_setprop_string(fdt, name, "compatible", "cfi-flash"); 292 qemu_fdt_setprop_sized_cells(fdt, name, "reg", 293 1, flashbase, 1, flashsize); 294 qemu_fdt_setprop_cell(fdt, name, "bank-width", bank_width); 295 } 296 297 static void platform_bus_create_devtree(PPCE500MachineState *pms, 298 void *fdt, const char *mpic) 299 { 300 const PPCE500MachineClass *pmc = PPCE500_MACHINE_GET_CLASS(pms); 301 gchar *node = g_strdup_printf("/platform@%"PRIx64, pmc->platform_bus_base); 302 const char platcomp[] = "qemu,platform\0simple-bus"; 303 uint64_t addr = pmc->platform_bus_base; 304 uint64_t size = pmc->platform_bus_size; 305 int irq_start = pmc->platform_bus_first_irq; 306 SysBusDevice *sbdev; 307 bool ambiguous; 308 309 /* Create a /platform node that we can put all devices into */ 310 311 qemu_fdt_add_subnode(fdt, node); 312 qemu_fdt_setprop(fdt, node, "compatible", platcomp, sizeof(platcomp)); 313 314 /* Our platform bus region is less than 32bit big, so 1 cell is enough for 315 address and size */ 316 qemu_fdt_setprop_cells(fdt, node, "#size-cells", 1); 317 qemu_fdt_setprop_cells(fdt, node, "#address-cells", 1); 318 qemu_fdt_setprop_cells(fdt, node, "ranges", 0, addr >> 32, addr, size); 319 320 qemu_fdt_setprop_phandle(fdt, node, "interrupt-parent", mpic); 321 322 /* Create dt nodes for dynamic devices */ 323 PlatformDevtreeData data = { 324 .fdt = fdt, 325 .mpic = mpic, 326 .irq_start = irq_start, 327 .node = node, 328 .pbus = pms->pbus_dev, 329 }; 330 331 /* Loop through all dynamic sysbus devices and create nodes for them */ 332 foreach_dynamic_sysbus_device(sysbus_device_create_devtree, &data); 333 334 sbdev = SYS_BUS_DEVICE(object_resolve_path_type("", TYPE_PFLASH_CFI01, 335 &ambiguous)); 336 if (sbdev) { 337 assert(!ambiguous); 338 create_devtree_flash(sbdev, &data); 339 } 340 341 g_free(node); 342 } 343 344 static int ppce500_load_device_tree(PPCE500MachineState *pms, 345 hwaddr addr, 346 hwaddr initrd_base, 347 hwaddr initrd_size, 348 hwaddr kernel_base, 349 hwaddr kernel_size, 350 bool dry_run) 351 { 352 MachineState *machine = MACHINE(pms); 353 unsigned int smp_cpus = machine->smp.cpus; 354 const PPCE500MachineClass *pmc = PPCE500_MACHINE_GET_CLASS(pms); 355 CPUPPCState *env = first_cpu->env_ptr; 356 int ret = -1; 357 uint64_t mem_reg_property[] = { 0, cpu_to_be64(machine->ram_size) }; 358 int fdt_size; 359 void *fdt; 360 uint8_t hypercall[16]; 361 uint32_t clock_freq = PLATFORM_CLK_FREQ_HZ; 362 uint32_t tb_freq = PLATFORM_CLK_FREQ_HZ; 363 int i; 364 char compatible_sb[] = "fsl,mpc8544-immr\0simple-bus"; 365 char *soc; 366 char *mpic; 367 uint32_t mpic_ph; 368 uint32_t msi_ph; 369 char *gutil; 370 char *pci; 371 char *msi; 372 uint32_t *pci_map = NULL; 373 int len; 374 uint32_t pci_ranges[14] = 375 { 376 0x2000000, 0x0, pmc->pci_mmio_bus_base, 377 pmc->pci_mmio_base >> 32, pmc->pci_mmio_base, 378 0x0, 0x20000000, 379 380 0x1000000, 0x0, 0x0, 381 pmc->pci_pio_base >> 32, pmc->pci_pio_base, 382 0x0, 0x10000, 383 }; 384 const char *dtb_file = machine->dtb; 385 const char *toplevel_compat = machine->dt_compatible; 386 uint8_t rng_seed[32]; 387 388 if (dtb_file) { 389 char *filename; 390 filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, dtb_file); 391 if (!filename) { 392 goto out; 393 } 394 395 fdt = load_device_tree(filename, &fdt_size); 396 g_free(filename); 397 if (!fdt) { 398 goto out; 399 } 400 goto done; 401 } 402 403 fdt = create_device_tree(&fdt_size); 404 if (fdt == NULL) { 405 goto out; 406 } 407 408 /* Manipulate device tree in memory. */ 409 qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 2); 410 qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 2); 411 412 qemu_fdt_add_subnode(fdt, "/memory"); 413 qemu_fdt_setprop_string(fdt, "/memory", "device_type", "memory"); 414 qemu_fdt_setprop(fdt, "/memory", "reg", mem_reg_property, 415 sizeof(mem_reg_property)); 416 417 qemu_fdt_add_subnode(fdt, "/chosen"); 418 if (initrd_size) { 419 ret = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-start", 420 initrd_base); 421 if (ret < 0) { 422 fprintf(stderr, "couldn't set /chosen/linux,initrd-start\n"); 423 } 424 425 ret = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-end", 426 (initrd_base + initrd_size)); 427 if (ret < 0) { 428 fprintf(stderr, "couldn't set /chosen/linux,initrd-end\n"); 429 } 430 431 } 432 433 if (kernel_base != -1ULL) { 434 qemu_fdt_setprop_cells(fdt, "/chosen", "qemu,boot-kernel", 435 kernel_base >> 32, kernel_base, 436 kernel_size >> 32, kernel_size); 437 } 438 439 ret = qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", 440 machine->kernel_cmdline); 441 if (ret < 0) 442 fprintf(stderr, "couldn't set /chosen/bootargs\n"); 443 444 qemu_guest_getrandom_nofail(rng_seed, sizeof(rng_seed)); 445 qemu_fdt_setprop(fdt, "/chosen", "rng-seed", rng_seed, sizeof(rng_seed)); 446 447 if (kvm_enabled()) { 448 /* Read out host's frequencies */ 449 clock_freq = kvmppc_get_clockfreq(); 450 tb_freq = kvmppc_get_tbfreq(); 451 452 /* indicate KVM hypercall interface */ 453 qemu_fdt_add_subnode(fdt, "/hypervisor"); 454 qemu_fdt_setprop_string(fdt, "/hypervisor", "compatible", 455 "linux,kvm"); 456 kvmppc_get_hypercall(env, hypercall, sizeof(hypercall)); 457 qemu_fdt_setprop(fdt, "/hypervisor", "hcall-instructions", 458 hypercall, sizeof(hypercall)); 459 /* if KVM supports the idle hcall, set property indicating this */ 460 if (kvmppc_get_hasidle(env)) { 461 qemu_fdt_setprop(fdt, "/hypervisor", "has-idle", NULL, 0); 462 } 463 } 464 465 /* Create CPU nodes */ 466 qemu_fdt_add_subnode(fdt, "/cpus"); 467 qemu_fdt_setprop_cell(fdt, "/cpus", "#address-cells", 1); 468 qemu_fdt_setprop_cell(fdt, "/cpus", "#size-cells", 0); 469 470 /* We need to generate the cpu nodes in reverse order, so Linux can pick 471 the first node as boot node and be happy */ 472 for (i = smp_cpus - 1; i >= 0; i--) { 473 CPUState *cpu; 474 char *cpu_name; 475 uint64_t cpu_release_addr = pmc->spin_base + (i * 0x20); 476 477 cpu = qemu_get_cpu(i); 478 if (cpu == NULL) { 479 continue; 480 } 481 env = cpu->env_ptr; 482 483 cpu_name = g_strdup_printf("/cpus/PowerPC,8544@%x", i); 484 qemu_fdt_add_subnode(fdt, cpu_name); 485 qemu_fdt_setprop_cell(fdt, cpu_name, "clock-frequency", clock_freq); 486 qemu_fdt_setprop_cell(fdt, cpu_name, "timebase-frequency", tb_freq); 487 qemu_fdt_setprop_string(fdt, cpu_name, "device_type", "cpu"); 488 qemu_fdt_setprop_cell(fdt, cpu_name, "reg", i); 489 qemu_fdt_setprop_cell(fdt, cpu_name, "d-cache-line-size", 490 env->dcache_line_size); 491 qemu_fdt_setprop_cell(fdt, cpu_name, "i-cache-line-size", 492 env->icache_line_size); 493 qemu_fdt_setprop_cell(fdt, cpu_name, "d-cache-size", 0x8000); 494 qemu_fdt_setprop_cell(fdt, cpu_name, "i-cache-size", 0x8000); 495 qemu_fdt_setprop_cell(fdt, cpu_name, "bus-frequency", 0); 496 if (cpu->cpu_index) { 497 qemu_fdt_setprop_string(fdt, cpu_name, "status", "disabled"); 498 qemu_fdt_setprop_string(fdt, cpu_name, "enable-method", 499 "spin-table"); 500 qemu_fdt_setprop_u64(fdt, cpu_name, "cpu-release-addr", 501 cpu_release_addr); 502 } else { 503 qemu_fdt_setprop_string(fdt, cpu_name, "status", "okay"); 504 } 505 g_free(cpu_name); 506 } 507 508 qemu_fdt_add_subnode(fdt, "/aliases"); 509 /* XXX These should go into their respective devices' code */ 510 soc = g_strdup_printf("/soc@%"PRIx64, pmc->ccsrbar_base); 511 qemu_fdt_add_subnode(fdt, soc); 512 qemu_fdt_setprop_string(fdt, soc, "device_type", "soc"); 513 qemu_fdt_setprop(fdt, soc, "compatible", compatible_sb, 514 sizeof(compatible_sb)); 515 qemu_fdt_setprop_cell(fdt, soc, "#address-cells", 1); 516 qemu_fdt_setprop_cell(fdt, soc, "#size-cells", 1); 517 qemu_fdt_setprop_cells(fdt, soc, "ranges", 0x0, 518 pmc->ccsrbar_base >> 32, pmc->ccsrbar_base, 519 MPC8544_CCSRBAR_SIZE); 520 /* XXX should contain a reasonable value */ 521 qemu_fdt_setprop_cell(fdt, soc, "bus-frequency", 0); 522 523 mpic = g_strdup_printf("%s/pic@%llx", soc, MPC8544_MPIC_REGS_OFFSET); 524 qemu_fdt_add_subnode(fdt, mpic); 525 qemu_fdt_setprop_string(fdt, mpic, "device_type", "open-pic"); 526 qemu_fdt_setprop_string(fdt, mpic, "compatible", "fsl,mpic"); 527 qemu_fdt_setprop_cells(fdt, mpic, "reg", MPC8544_MPIC_REGS_OFFSET, 528 0x40000); 529 qemu_fdt_setprop_cell(fdt, mpic, "#address-cells", 0); 530 qemu_fdt_setprop_cell(fdt, mpic, "#interrupt-cells", 2); 531 mpic_ph = qemu_fdt_alloc_phandle(fdt); 532 qemu_fdt_setprop_cell(fdt, mpic, "phandle", mpic_ph); 533 qemu_fdt_setprop_cell(fdt, mpic, "linux,phandle", mpic_ph); 534 qemu_fdt_setprop(fdt, mpic, "interrupt-controller", NULL, 0); 535 536 /* 537 * We have to generate ser1 first, because Linux takes the first 538 * device it finds in the dt as serial output device. And we generate 539 * devices in reverse order to the dt. 540 */ 541 if (serial_hd(1)) { 542 dt_serial_create(fdt, MPC8544_SERIAL1_REGS_OFFSET, 543 soc, mpic, "serial1", 1, false); 544 } 545 546 if (serial_hd(0)) { 547 dt_serial_create(fdt, MPC8544_SERIAL0_REGS_OFFSET, 548 soc, mpic, "serial0", 0, true); 549 } 550 551 /* i2c */ 552 dt_i2c_create(fdt, soc, mpic, "i2c"); 553 554 dt_rtc_create(fdt, "i2c", "rtc"); 555 556 557 gutil = g_strdup_printf("%s/global-utilities@%llx", soc, 558 MPC8544_UTIL_OFFSET); 559 qemu_fdt_add_subnode(fdt, gutil); 560 qemu_fdt_setprop_string(fdt, gutil, "compatible", "fsl,mpc8544-guts"); 561 qemu_fdt_setprop_cells(fdt, gutil, "reg", MPC8544_UTIL_OFFSET, 0x1000); 562 qemu_fdt_setprop(fdt, gutil, "fsl,has-rstcr", NULL, 0); 563 g_free(gutil); 564 565 msi = g_strdup_printf("/%s/msi@%llx", soc, MPC8544_MSI_REGS_OFFSET); 566 qemu_fdt_add_subnode(fdt, msi); 567 qemu_fdt_setprop_string(fdt, msi, "compatible", "fsl,mpic-msi"); 568 qemu_fdt_setprop_cells(fdt, msi, "reg", MPC8544_MSI_REGS_OFFSET, 0x200); 569 msi_ph = qemu_fdt_alloc_phandle(fdt); 570 qemu_fdt_setprop_cells(fdt, msi, "msi-available-ranges", 0x0, 0x100); 571 qemu_fdt_setprop_phandle(fdt, msi, "interrupt-parent", mpic); 572 qemu_fdt_setprop_cells(fdt, msi, "interrupts", 573 0xe0, 0x0, 574 0xe1, 0x0, 575 0xe2, 0x0, 576 0xe3, 0x0, 577 0xe4, 0x0, 578 0xe5, 0x0, 579 0xe6, 0x0, 580 0xe7, 0x0); 581 qemu_fdt_setprop_cell(fdt, msi, "phandle", msi_ph); 582 qemu_fdt_setprop_cell(fdt, msi, "linux,phandle", msi_ph); 583 g_free(msi); 584 585 pci = g_strdup_printf("/pci@%llx", 586 pmc->ccsrbar_base + MPC8544_PCI_REGS_OFFSET); 587 qemu_fdt_add_subnode(fdt, pci); 588 qemu_fdt_setprop_cell(fdt, pci, "cell-index", 0); 589 qemu_fdt_setprop_string(fdt, pci, "compatible", "fsl,mpc8540-pci"); 590 qemu_fdt_setprop_string(fdt, pci, "device_type", "pci"); 591 qemu_fdt_setprop_cells(fdt, pci, "interrupt-map-mask", 0xf800, 0x0, 592 0x0, 0x7); 593 pci_map = pci_map_create(fdt, qemu_fdt_get_phandle(fdt, mpic), 594 pmc->pci_first_slot, pmc->pci_nr_slots, 595 &len); 596 qemu_fdt_setprop(fdt, pci, "interrupt-map", pci_map, len); 597 qemu_fdt_setprop_phandle(fdt, pci, "interrupt-parent", mpic); 598 qemu_fdt_setprop_cells(fdt, pci, "interrupts", 24, 2); 599 qemu_fdt_setprop_cells(fdt, pci, "bus-range", 0, 255); 600 for (i = 0; i < 14; i++) { 601 pci_ranges[i] = cpu_to_be32(pci_ranges[i]); 602 } 603 qemu_fdt_setprop_cell(fdt, pci, "fsl,msi", msi_ph); 604 qemu_fdt_setprop(fdt, pci, "ranges", pci_ranges, sizeof(pci_ranges)); 605 qemu_fdt_setprop_cells(fdt, pci, "reg", 606 (pmc->ccsrbar_base + MPC8544_PCI_REGS_OFFSET) >> 32, 607 (pmc->ccsrbar_base + MPC8544_PCI_REGS_OFFSET), 608 0, 0x1000); 609 qemu_fdt_setprop_cell(fdt, pci, "clock-frequency", 66666666); 610 qemu_fdt_setprop_cell(fdt, pci, "#interrupt-cells", 1); 611 qemu_fdt_setprop_cell(fdt, pci, "#size-cells", 2); 612 qemu_fdt_setprop_cell(fdt, pci, "#address-cells", 3); 613 qemu_fdt_setprop_string(fdt, "/aliases", "pci0", pci); 614 g_free(pci); 615 616 if (pmc->has_mpc8xxx_gpio) { 617 create_dt_mpc8xxx_gpio(fdt, soc, mpic); 618 } 619 g_free(soc); 620 621 if (pms->pbus_dev) { 622 platform_bus_create_devtree(pms, fdt, mpic); 623 } 624 g_free(mpic); 625 626 pmc->fixup_devtree(fdt); 627 628 if (toplevel_compat) { 629 qemu_fdt_setprop(fdt, "/", "compatible", toplevel_compat, 630 strlen(toplevel_compat) + 1); 631 } 632 633 done: 634 if (!dry_run) { 635 qemu_fdt_dumpdtb(fdt, fdt_size); 636 cpu_physical_memory_write(addr, fdt, fdt_size); 637 } 638 ret = fdt_size; 639 g_free(fdt); 640 641 out: 642 g_free(pci_map); 643 644 return ret; 645 } 646 647 typedef struct DeviceTreeParams { 648 PPCE500MachineState *machine; 649 hwaddr addr; 650 hwaddr initrd_base; 651 hwaddr initrd_size; 652 hwaddr kernel_base; 653 hwaddr kernel_size; 654 Notifier notifier; 655 } DeviceTreeParams; 656 657 static void ppce500_reset_device_tree(void *opaque) 658 { 659 DeviceTreeParams *p = opaque; 660 ppce500_load_device_tree(p->machine, p->addr, p->initrd_base, 661 p->initrd_size, p->kernel_base, p->kernel_size, 662 false); 663 } 664 665 static void ppce500_init_notify(Notifier *notifier, void *data) 666 { 667 DeviceTreeParams *p = container_of(notifier, DeviceTreeParams, notifier); 668 ppce500_reset_device_tree(p); 669 } 670 671 static int ppce500_prep_device_tree(PPCE500MachineState *machine, 672 hwaddr addr, 673 hwaddr initrd_base, 674 hwaddr initrd_size, 675 hwaddr kernel_base, 676 hwaddr kernel_size) 677 { 678 DeviceTreeParams *p = g_new(DeviceTreeParams, 1); 679 p->machine = machine; 680 p->addr = addr; 681 p->initrd_base = initrd_base; 682 p->initrd_size = initrd_size; 683 p->kernel_base = kernel_base; 684 p->kernel_size = kernel_size; 685 686 qemu_register_reset(ppce500_reset_device_tree, p); 687 p->notifier.notify = ppce500_init_notify; 688 qemu_add_machine_init_done_notifier(&p->notifier); 689 690 /* Issue the device tree loader once, so that we get the size of the blob */ 691 return ppce500_load_device_tree(machine, addr, initrd_base, initrd_size, 692 kernel_base, kernel_size, true); 693 } 694 695 /* Create -kernel TLB entries for BookE. */ 696 hwaddr booke206_page_size_to_tlb(uint64_t size) 697 { 698 return 63 - clz64(size / KiB); 699 } 700 701 static int booke206_initial_map_tsize(CPUPPCState *env) 702 { 703 struct boot_info *bi = env->load_info; 704 hwaddr dt_end; 705 int ps; 706 707 /* Our initial TLB entry needs to cover everything from 0 to 708 the device tree top */ 709 dt_end = bi->dt_base + bi->dt_size; 710 ps = booke206_page_size_to_tlb(dt_end) + 1; 711 if (ps & 1) { 712 /* e500v2 can only do even TLB size bits */ 713 ps++; 714 } 715 return ps; 716 } 717 718 static uint64_t mmubooke_initial_mapsize(CPUPPCState *env) 719 { 720 int tsize; 721 722 tsize = booke206_initial_map_tsize(env); 723 return (1ULL << 10 << tsize); 724 } 725 726 static void mmubooke_create_initial_mapping(CPUPPCState *env) 727 { 728 ppcmas_tlb_t *tlb = booke206_get_tlbm(env, 1, 0, 0); 729 hwaddr size; 730 int ps; 731 732 ps = booke206_initial_map_tsize(env); 733 size = (ps << MAS1_TSIZE_SHIFT); 734 tlb->mas1 = MAS1_VALID | size; 735 tlb->mas2 = 0; 736 tlb->mas7_3 = 0; 737 tlb->mas7_3 |= MAS3_UR | MAS3_UW | MAS3_UX | MAS3_SR | MAS3_SW | MAS3_SX; 738 739 env->tlb_dirty = true; 740 } 741 742 static void ppce500_cpu_reset_sec(void *opaque) 743 { 744 PowerPCCPU *cpu = opaque; 745 CPUState *cs = CPU(cpu); 746 747 cpu_reset(cs); 748 749 cs->exception_index = EXCP_HLT; 750 } 751 752 static void ppce500_cpu_reset(void *opaque) 753 { 754 PowerPCCPU *cpu = opaque; 755 CPUState *cs = CPU(cpu); 756 CPUPPCState *env = &cpu->env; 757 struct boot_info *bi = env->load_info; 758 759 cpu_reset(cs); 760 761 /* Set initial guest state. */ 762 cs->halted = 0; 763 env->gpr[1] = (16 * MiB) - 8; 764 env->gpr[3] = bi->dt_base; 765 env->gpr[4] = 0; 766 env->gpr[5] = 0; 767 env->gpr[6] = EPAPR_MAGIC; 768 env->gpr[7] = mmubooke_initial_mapsize(env); 769 env->gpr[8] = 0; 770 env->gpr[9] = 0; 771 env->nip = bi->entry; 772 mmubooke_create_initial_mapping(env); 773 } 774 775 static DeviceState *ppce500_init_mpic_qemu(PPCE500MachineState *pms, 776 IrqLines *irqs) 777 { 778 DeviceState *dev; 779 SysBusDevice *s; 780 int i, j, k; 781 MachineState *machine = MACHINE(pms); 782 unsigned int smp_cpus = machine->smp.cpus; 783 const PPCE500MachineClass *pmc = PPCE500_MACHINE_GET_CLASS(pms); 784 785 dev = qdev_new(TYPE_OPENPIC); 786 object_property_add_child(OBJECT(machine), "pic", OBJECT(dev)); 787 qdev_prop_set_uint32(dev, "model", pmc->mpic_version); 788 qdev_prop_set_uint32(dev, "nb_cpus", smp_cpus); 789 790 s = SYS_BUS_DEVICE(dev); 791 sysbus_realize_and_unref(s, &error_fatal); 792 793 k = 0; 794 for (i = 0; i < smp_cpus; i++) { 795 for (j = 0; j < OPENPIC_OUTPUT_NB; j++) { 796 sysbus_connect_irq(s, k++, irqs[i].irq[j]); 797 } 798 } 799 800 return dev; 801 } 802 803 static DeviceState *ppce500_init_mpic_kvm(const PPCE500MachineClass *pmc, 804 IrqLines *irqs, Error **errp) 805 { 806 DeviceState *dev; 807 CPUState *cs; 808 809 dev = qdev_new(TYPE_KVM_OPENPIC); 810 qdev_prop_set_uint32(dev, "model", pmc->mpic_version); 811 812 if (!sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp)) { 813 object_unparent(OBJECT(dev)); 814 return NULL; 815 } 816 817 CPU_FOREACH(cs) { 818 if (kvm_openpic_connect_vcpu(dev, cs)) { 819 fprintf(stderr, "%s: failed to connect vcpu to irqchip\n", 820 __func__); 821 abort(); 822 } 823 } 824 825 return dev; 826 } 827 828 static DeviceState *ppce500_init_mpic(PPCE500MachineState *pms, 829 MemoryRegion *ccsr, 830 IrqLines *irqs) 831 { 832 const PPCE500MachineClass *pmc = PPCE500_MACHINE_GET_CLASS(pms); 833 DeviceState *dev = NULL; 834 SysBusDevice *s; 835 836 if (kvm_enabled()) { 837 Error *err = NULL; 838 839 if (kvm_kernel_irqchip_allowed()) { 840 dev = ppce500_init_mpic_kvm(pmc, irqs, &err); 841 } 842 if (kvm_kernel_irqchip_required() && !dev) { 843 error_reportf_err(err, 844 "kernel_irqchip requested but unavailable: "); 845 exit(1); 846 } 847 } 848 849 if (!dev) { 850 dev = ppce500_init_mpic_qemu(pms, irqs); 851 } 852 853 s = SYS_BUS_DEVICE(dev); 854 memory_region_add_subregion(ccsr, MPC8544_MPIC_REGS_OFFSET, 855 s->mmio[0].memory); 856 857 return dev; 858 } 859 860 static void ppce500_power_off(void *opaque, int line, int on) 861 { 862 if (on) { 863 qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN); 864 } 865 } 866 867 void ppce500_init(MachineState *machine) 868 { 869 MemoryRegion *address_space_mem = get_system_memory(); 870 PPCE500MachineState *pms = PPCE500_MACHINE(machine); 871 const PPCE500MachineClass *pmc = PPCE500_MACHINE_GET_CLASS(machine); 872 PCIBus *pci_bus; 873 CPUPPCState *env = NULL; 874 uint64_t loadaddr; 875 hwaddr kernel_base = -1LL; 876 int kernel_size = 0; 877 hwaddr dt_base = 0; 878 hwaddr initrd_base = 0; 879 int initrd_size = 0; 880 hwaddr cur_base = 0; 881 char *filename; 882 const char *payload_name; 883 bool kernel_as_payload; 884 hwaddr bios_entry = 0; 885 target_long payload_size; 886 struct boot_info *boot_info; 887 int dt_size; 888 int i; 889 unsigned int smp_cpus = machine->smp.cpus; 890 /* irq num for pin INTA, INTB, INTC and INTD is 1, 2, 3 and 891 * 4 respectively */ 892 unsigned int pci_irq_nrs[PCI_NUM_PINS] = {1, 2, 3, 4}; 893 IrqLines *irqs; 894 DeviceState *dev, *mpicdev; 895 DriveInfo *dinfo; 896 CPUPPCState *firstenv = NULL; 897 MemoryRegion *ccsr_addr_space; 898 SysBusDevice *s; 899 PPCE500CCSRState *ccsr; 900 I2CBus *i2c; 901 902 irqs = g_new0(IrqLines, smp_cpus); 903 for (i = 0; i < smp_cpus; i++) { 904 PowerPCCPU *cpu; 905 CPUState *cs; 906 907 cpu = POWERPC_CPU(object_new(machine->cpu_type)); 908 env = &cpu->env; 909 cs = CPU(cpu); 910 911 if (env->mmu_model != POWERPC_MMU_BOOKE206) { 912 error_report("MMU model %i not supported by this machine", 913 env->mmu_model); 914 exit(1); 915 } 916 917 /* 918 * Secondary CPU starts in halted state for now. Needs to change 919 * when implementing non-kernel boot. 920 */ 921 object_property_set_bool(OBJECT(cs), "start-powered-off", i != 0, 922 &error_fatal); 923 qdev_realize_and_unref(DEVICE(cs), NULL, &error_fatal); 924 925 if (!firstenv) { 926 firstenv = env; 927 } 928 929 irqs[i].irq[OPENPIC_OUTPUT_INT] = 930 qdev_get_gpio_in(DEVICE(cpu), PPCE500_INPUT_INT); 931 irqs[i].irq[OPENPIC_OUTPUT_CINT] = 932 qdev_get_gpio_in(DEVICE(cpu), PPCE500_INPUT_CINT); 933 env->spr_cb[SPR_BOOKE_PIR].default_value = cs->cpu_index = i; 934 env->mpic_iack = pmc->ccsrbar_base + MPC8544_MPIC_REGS_OFFSET + 0xa0; 935 936 ppc_booke_timers_init(cpu, PLATFORM_CLK_FREQ_HZ, PPC_TIMER_E500); 937 938 /* Register reset handler */ 939 if (!i) { 940 /* Primary CPU */ 941 struct boot_info *boot_info; 942 boot_info = g_new0(struct boot_info, 1); 943 qemu_register_reset(ppce500_cpu_reset, cpu); 944 env->load_info = boot_info; 945 } else { 946 /* Secondary CPUs */ 947 qemu_register_reset(ppce500_cpu_reset_sec, cpu); 948 } 949 } 950 951 env = firstenv; 952 953 if (!QEMU_IS_ALIGNED(machine->ram_size, RAM_SIZES_ALIGN)) { 954 error_report("RAM size must be multiple of %" PRIu64, RAM_SIZES_ALIGN); 955 exit(EXIT_FAILURE); 956 } 957 958 /* Register Memory */ 959 memory_region_add_subregion(address_space_mem, 0, machine->ram); 960 961 dev = qdev_new("e500-ccsr"); 962 object_property_add_child(qdev_get_machine(), "e500-ccsr", 963 OBJECT(dev)); 964 sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); 965 ccsr = CCSR(dev); 966 ccsr_addr_space = &ccsr->ccsr_space; 967 memory_region_add_subregion(address_space_mem, pmc->ccsrbar_base, 968 ccsr_addr_space); 969 970 mpicdev = ppce500_init_mpic(pms, ccsr_addr_space, irqs); 971 g_free(irqs); 972 973 /* Serial */ 974 if (serial_hd(0)) { 975 serial_mm_init(ccsr_addr_space, MPC8544_SERIAL0_REGS_OFFSET, 976 0, qdev_get_gpio_in(mpicdev, 42), 399193, 977 serial_hd(0), DEVICE_BIG_ENDIAN); 978 } 979 980 if (serial_hd(1)) { 981 serial_mm_init(ccsr_addr_space, MPC8544_SERIAL1_REGS_OFFSET, 982 0, qdev_get_gpio_in(mpicdev, 42), 399193, 983 serial_hd(1), DEVICE_BIG_ENDIAN); 984 } 985 /* I2C */ 986 dev = qdev_new("mpc-i2c"); 987 s = SYS_BUS_DEVICE(dev); 988 sysbus_realize_and_unref(s, &error_fatal); 989 sysbus_connect_irq(s, 0, qdev_get_gpio_in(mpicdev, MPC8544_I2C_IRQ)); 990 memory_region_add_subregion(ccsr_addr_space, MPC8544_I2C_REGS_OFFSET, 991 sysbus_mmio_get_region(s, 0)); 992 i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c"); 993 i2c_slave_create_simple(i2c, "ds1338", RTC_REGS_OFFSET); 994 995 996 /* General Utility device */ 997 dev = qdev_new("mpc8544-guts"); 998 s = SYS_BUS_DEVICE(dev); 999 sysbus_realize_and_unref(s, &error_fatal); 1000 memory_region_add_subregion(ccsr_addr_space, MPC8544_UTIL_OFFSET, 1001 sysbus_mmio_get_region(s, 0)); 1002 1003 /* PCI */ 1004 dev = qdev_new("e500-pcihost"); 1005 object_property_add_child(qdev_get_machine(), "pci-host", OBJECT(dev)); 1006 qdev_prop_set_uint32(dev, "first_slot", pmc->pci_first_slot); 1007 qdev_prop_set_uint32(dev, "first_pin_irq", pci_irq_nrs[0]); 1008 s = SYS_BUS_DEVICE(dev); 1009 sysbus_realize_and_unref(s, &error_fatal); 1010 for (i = 0; i < PCI_NUM_PINS; i++) { 1011 sysbus_connect_irq(s, i, qdev_get_gpio_in(mpicdev, pci_irq_nrs[i])); 1012 } 1013 1014 memory_region_add_subregion(ccsr_addr_space, MPC8544_PCI_REGS_OFFSET, 1015 sysbus_mmio_get_region(s, 0)); 1016 1017 pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci.0"); 1018 if (!pci_bus) 1019 printf("couldn't create PCI controller!\n"); 1020 1021 if (pci_bus) { 1022 /* Register network interfaces. */ 1023 for (i = 0; i < nb_nics; i++) { 1024 pci_nic_init_nofail(&nd_table[i], pci_bus, "virtio-net-pci", NULL); 1025 } 1026 } 1027 1028 /* Register spinning region */ 1029 sysbus_create_simple("e500-spin", pmc->spin_base, NULL); 1030 1031 if (pmc->has_mpc8xxx_gpio) { 1032 qemu_irq poweroff_irq; 1033 1034 dev = qdev_new("mpc8xxx_gpio"); 1035 s = SYS_BUS_DEVICE(dev); 1036 sysbus_realize_and_unref(s, &error_fatal); 1037 sysbus_connect_irq(s, 0, qdev_get_gpio_in(mpicdev, MPC8XXX_GPIO_IRQ)); 1038 memory_region_add_subregion(ccsr_addr_space, MPC8XXX_GPIO_OFFSET, 1039 sysbus_mmio_get_region(s, 0)); 1040 1041 /* Power Off GPIO at Pin 0 */ 1042 poweroff_irq = qemu_allocate_irq(ppce500_power_off, NULL, 0); 1043 qdev_connect_gpio_out(dev, 0, poweroff_irq); 1044 } 1045 1046 /* Platform Bus Device */ 1047 dev = qdev_new(TYPE_PLATFORM_BUS_DEVICE); 1048 dev->id = g_strdup(TYPE_PLATFORM_BUS_DEVICE); 1049 qdev_prop_set_uint32(dev, "num_irqs", pmc->platform_bus_num_irqs); 1050 qdev_prop_set_uint32(dev, "mmio_size", pmc->platform_bus_size); 1051 sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); 1052 pms->pbus_dev = PLATFORM_BUS_DEVICE(dev); 1053 1054 s = SYS_BUS_DEVICE(pms->pbus_dev); 1055 for (i = 0; i < pmc->platform_bus_num_irqs; i++) { 1056 int irqn = pmc->platform_bus_first_irq + i; 1057 sysbus_connect_irq(s, i, qdev_get_gpio_in(mpicdev, irqn)); 1058 } 1059 1060 memory_region_add_subregion(address_space_mem, 1061 pmc->platform_bus_base, 1062 &pms->pbus_dev->mmio); 1063 1064 dinfo = drive_get(IF_PFLASH, 0, 0); 1065 if (dinfo) { 1066 BlockBackend *blk = blk_by_legacy_dinfo(dinfo); 1067 BlockDriverState *bs = blk_bs(blk); 1068 uint64_t mmio_size = memory_region_size(&pms->pbus_dev->mmio); 1069 uint64_t size = bdrv_getlength(bs); 1070 uint32_t sector_len = 64 * KiB; 1071 1072 if (!is_power_of_2(size)) { 1073 error_report("Size of pflash file must be a power of two."); 1074 exit(1); 1075 } 1076 1077 if (size > mmio_size) { 1078 error_report("Size of pflash file must not be bigger than %" PRIu64 1079 " bytes.", mmio_size); 1080 exit(1); 1081 } 1082 1083 if (!QEMU_IS_ALIGNED(size, sector_len)) { 1084 error_report("Size of pflash file must be a multiple of %" PRIu32 1085 ".", sector_len); 1086 exit(1); 1087 } 1088 1089 dev = qdev_new(TYPE_PFLASH_CFI01); 1090 qdev_prop_set_drive(dev, "drive", blk); 1091 qdev_prop_set_uint32(dev, "num-blocks", size / sector_len); 1092 qdev_prop_set_uint64(dev, "sector-length", sector_len); 1093 qdev_prop_set_uint8(dev, "width", 2); 1094 qdev_prop_set_bit(dev, "big-endian", true); 1095 qdev_prop_set_uint16(dev, "id0", 0x89); 1096 qdev_prop_set_uint16(dev, "id1", 0x18); 1097 qdev_prop_set_uint16(dev, "id2", 0x0000); 1098 qdev_prop_set_uint16(dev, "id3", 0x0); 1099 qdev_prop_set_string(dev, "name", "e500.flash"); 1100 sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); 1101 1102 memory_region_add_subregion(&pms->pbus_dev->mmio, 0, 1103 pflash_cfi01_get_memory(PFLASH_CFI01(dev))); 1104 } 1105 1106 /* 1107 * Smart firmware defaults ahead! 1108 * 1109 * We follow the following table to select which payload we execute. 1110 * 1111 * -kernel | -bios | payload 1112 * ---------+-------+--------- 1113 * N | Y | u-boot 1114 * N | N | u-boot 1115 * Y | Y | u-boot 1116 * Y | N | kernel 1117 * 1118 * This ensures backwards compatibility with how we used to expose 1119 * -kernel to users but allows them to run through u-boot as well. 1120 */ 1121 kernel_as_payload = false; 1122 if (machine->firmware == NULL) { 1123 if (machine->kernel_filename) { 1124 payload_name = machine->kernel_filename; 1125 kernel_as_payload = true; 1126 } else { 1127 payload_name = "u-boot.e500"; 1128 } 1129 } else { 1130 payload_name = machine->firmware; 1131 } 1132 1133 filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, payload_name); 1134 if (!filename) { 1135 error_report("could not find firmware/kernel file '%s'", payload_name); 1136 exit(1); 1137 } 1138 1139 payload_size = load_elf(filename, NULL, NULL, NULL, 1140 &bios_entry, &loadaddr, NULL, NULL, 1141 1, PPC_ELF_MACHINE, 0, 0); 1142 if (payload_size < 0) { 1143 /* 1144 * Hrm. No ELF image? Try a uImage, maybe someone is giving us an 1145 * ePAPR compliant kernel 1146 */ 1147 loadaddr = LOAD_UIMAGE_LOADADDR_INVALID; 1148 payload_size = load_uimage(filename, &bios_entry, &loadaddr, NULL, 1149 NULL, NULL); 1150 if (payload_size < 0) { 1151 error_report("could not load firmware '%s'", filename); 1152 exit(1); 1153 } 1154 } 1155 1156 g_free(filename); 1157 1158 if (kernel_as_payload) { 1159 kernel_base = loadaddr; 1160 kernel_size = payload_size; 1161 } 1162 1163 cur_base = loadaddr + payload_size; 1164 if (cur_base < 32 * MiB) { 1165 /* u-boot occupies memory up to 32MB, so load blobs above */ 1166 cur_base = 32 * MiB; 1167 } 1168 1169 /* Load bare kernel only if no bios/u-boot has been provided */ 1170 if (machine->kernel_filename && !kernel_as_payload) { 1171 kernel_base = cur_base; 1172 kernel_size = load_image_targphys(machine->kernel_filename, 1173 cur_base, 1174 machine->ram_size - cur_base); 1175 if (kernel_size < 0) { 1176 error_report("could not load kernel '%s'", 1177 machine->kernel_filename); 1178 exit(1); 1179 } 1180 1181 cur_base += kernel_size; 1182 } 1183 1184 /* Load initrd. */ 1185 if (machine->initrd_filename) { 1186 initrd_base = (cur_base + INITRD_LOAD_PAD) & ~INITRD_PAD_MASK; 1187 initrd_size = load_image_targphys(machine->initrd_filename, initrd_base, 1188 machine->ram_size - initrd_base); 1189 1190 if (initrd_size < 0) { 1191 error_report("could not load initial ram disk '%s'", 1192 machine->initrd_filename); 1193 exit(1); 1194 } 1195 1196 cur_base = initrd_base + initrd_size; 1197 } 1198 1199 /* 1200 * Reserve space for dtb behind the kernel image because Linux has a bug 1201 * where it can only handle the dtb if it's within the first 64MB of where 1202 * <kernel> starts. dtb cannot not reach initrd_base because INITRD_LOAD_PAD 1203 * ensures enough space between kernel and initrd. 1204 */ 1205 dt_base = (loadaddr + payload_size + DTC_LOAD_PAD) & ~DTC_PAD_MASK; 1206 if (dt_base + DTB_MAX_SIZE > machine->ram_size) { 1207 error_report("not enough memory for device tree"); 1208 exit(1); 1209 } 1210 1211 dt_size = ppce500_prep_device_tree(pms, dt_base, 1212 initrd_base, initrd_size, 1213 kernel_base, kernel_size); 1214 if (dt_size < 0) { 1215 error_report("couldn't load device tree"); 1216 exit(1); 1217 } 1218 assert(dt_size < DTB_MAX_SIZE); 1219 1220 boot_info = env->load_info; 1221 boot_info->entry = bios_entry; 1222 boot_info->dt_base = dt_base; 1223 boot_info->dt_size = dt_size; 1224 } 1225 1226 static void e500_ccsr_initfn(Object *obj) 1227 { 1228 PPCE500CCSRState *ccsr = CCSR(obj); 1229 memory_region_init(&ccsr->ccsr_space, obj, "e500-ccsr", 1230 MPC8544_CCSRBAR_SIZE); 1231 } 1232 1233 static const TypeInfo e500_ccsr_info = { 1234 .name = TYPE_CCSR, 1235 .parent = TYPE_SYS_BUS_DEVICE, 1236 .instance_size = sizeof(PPCE500CCSRState), 1237 .instance_init = e500_ccsr_initfn, 1238 }; 1239 1240 static const TypeInfo ppce500_info = { 1241 .name = TYPE_PPCE500_MACHINE, 1242 .parent = TYPE_MACHINE, 1243 .abstract = true, 1244 .instance_size = sizeof(PPCE500MachineState), 1245 .class_size = sizeof(PPCE500MachineClass), 1246 }; 1247 1248 static void e500_register_types(void) 1249 { 1250 type_register_static(&e500_ccsr_info); 1251 type_register_static(&ppce500_info); 1252 } 1253 1254 type_init(e500_register_types)