qemu

spapr_xive_kvm.c (24305B)

---

 /*
  * QEMU PowerPC sPAPR XIVE interrupt controller model
  *
  * Copyright (c) 2017-2019, IBM Corporation.
  *
  * This code is licensed under the GPL version 2 or later. See the
  * COPYING file in the top-level directory.
  */
 
 #include "qemu/osdep.h"
 #include "qemu/log.h"
 #include "qemu/error-report.h"
 #include "qapi/error.h"
 #include "target/ppc/cpu.h"
 #include "sysemu/cpus.h"
 #include "sysemu/kvm.h"
 #include "sysemu/runstate.h"
 #include "hw/ppc/spapr.h"
 #include "hw/ppc/spapr_cpu_core.h"
 #include "hw/ppc/spapr_xive.h"
 #include "hw/ppc/xive.h"
 #include "kvm_ppc.h"
 #include "trace.h"
 
 #include <sys/ioctl.h>
 
 /*
  * Helpers for CPU hotplug
  *
  * TODO: make a common KVMEnabledCPU layer for XICS and XIVE
  */
 typedef struct KVMEnabledCPU {
     unsigned long vcpu_id;
     QLIST_ENTRY(KVMEnabledCPU) node;
 } KVMEnabledCPU;
 
 static QLIST_HEAD(, KVMEnabledCPU)
     kvm_enabled_cpus = QLIST_HEAD_INITIALIZER(&kvm_enabled_cpus);
 
 static bool kvm_cpu_is_enabled(CPUState *cs)
 {
     KVMEnabledCPU *enabled_cpu;
     unsigned long vcpu_id = kvm_arch_vcpu_id(cs);
 
     QLIST_FOREACH(enabled_cpu, &kvm_enabled_cpus, node) {
         if (enabled_cpu->vcpu_id == vcpu_id) {
             return true;
         }
     }
     return false;
 }
 
 static void kvm_cpu_enable(CPUState *cs)
 {
     KVMEnabledCPU *enabled_cpu;
     unsigned long vcpu_id = kvm_arch_vcpu_id(cs);
 
     enabled_cpu = g_malloc(sizeof(*enabled_cpu));
     enabled_cpu->vcpu_id = vcpu_id;
     QLIST_INSERT_HEAD(&kvm_enabled_cpus, enabled_cpu, node);
 }
 
 static void kvm_cpu_disable_all(void)
 {
     KVMEnabledCPU *enabled_cpu, *next;
 
     QLIST_FOREACH_SAFE(enabled_cpu, &kvm_enabled_cpus, node, next) {
         QLIST_REMOVE(enabled_cpu, node);
         g_free(enabled_cpu);
     }
 }
 
 /*
  * XIVE Thread Interrupt Management context (KVM)
  */
 
 int kvmppc_xive_cpu_set_state(XiveTCTX *tctx, Error **errp)
 {
     SpaprXive *xive = SPAPR_XIVE(tctx->xptr);
     uint64_t state[2];
     int ret;
 
     assert(xive->fd != -1);
 
     /* word0 and word1 of the OS ring. */
     state[0] = *((uint64_t *) &tctx->regs[TM_QW1_OS]);
 
     ret = kvm_set_one_reg(tctx->cs, KVM_REG_PPC_VP_STATE, state);
     if (ret != 0) {
         error_setg_errno(errp, -ret,
                          "XIVE: could not restore KVM state of CPU %ld",
                          kvm_arch_vcpu_id(tctx->cs));
         return ret;
     }
 
     return 0;
 }
 
 int kvmppc_xive_cpu_get_state(XiveTCTX *tctx, Error **errp)
 {
     SpaprXive *xive = SPAPR_XIVE(tctx->xptr);
     uint64_t state[2] = { 0 };
     int ret;
 
     assert(xive->fd != -1);
 
     ret = kvm_get_one_reg(tctx->cs, KVM_REG_PPC_VP_STATE, state);
     if (ret != 0) {
         error_setg_errno(errp, -ret,
                          "XIVE: could not capture KVM state of CPU %ld",
                          kvm_arch_vcpu_id(tctx->cs));
         return ret;
     }
 
     /* word0 and word1 of the OS ring. */
     *((uint64_t *) &tctx->regs[TM_QW1_OS]) = state[0];
 
     return 0;
 }
 
 typedef struct {
     XiveTCTX *tctx;
     Error **errp;
     int ret;
 } XiveCpuGetState;
 
 static void kvmppc_xive_cpu_do_synchronize_state(CPUState *cpu,
                                                  run_on_cpu_data arg)
 {
     XiveCpuGetState *s = arg.host_ptr;
 
     s->ret = kvmppc_xive_cpu_get_state(s->tctx, s->errp);
 }
 
 int kvmppc_xive_cpu_synchronize_state(XiveTCTX *tctx, Error **errp)
 {
     XiveCpuGetState s = {
         .tctx = tctx,
         .errp = errp,
     };
 
     /*
      * Kick the vCPU to make sure they are available for the KVM ioctl.
      */
     run_on_cpu(tctx->cs, kvmppc_xive_cpu_do_synchronize_state,
                RUN_ON_CPU_HOST_PTR(&s));
 
     return s.ret;
 }
 
 int kvmppc_xive_cpu_connect(XiveTCTX *tctx, Error **errp)
 {
     ERRP_GUARD();
     SpaprXive *xive = SPAPR_XIVE(tctx->xptr);
     unsigned long vcpu_id;
     int ret;
 
     assert(xive->fd != -1);
 
     /* Check if CPU was hot unplugged and replugged. */
     if (kvm_cpu_is_enabled(tctx->cs)) {
         return 0;
     }
 
     vcpu_id = kvm_arch_vcpu_id(tctx->cs);
 
     trace_kvm_xive_cpu_connect(vcpu_id);
 
     ret = kvm_vcpu_enable_cap(tctx->cs, KVM_CAP_PPC_IRQ_XIVE, 0, xive->fd,
                               vcpu_id, 0);
     if (ret < 0) {
         error_setg_errno(errp, -ret,
                          "XIVE: unable to connect CPU%ld to KVM device",
                          vcpu_id);
         if (ret == -ENOSPC) {
             error_append_hint(errp, "Try -smp maxcpus=N with N < %u\n",
                               MACHINE(qdev_get_machine())->smp.max_cpus);
         }
         return ret;
     }
 
     kvm_cpu_enable(tctx->cs);
     return 0;
 }
 
 /*
  * XIVE Interrupt Source (KVM)
  */
 
 int kvmppc_xive_set_source_config(SpaprXive *xive, uint32_t lisn, XiveEAS *eas,
                                   Error **errp)
 {
     uint32_t end_idx;
     uint32_t end_blk;
     uint8_t priority;
     uint32_t server;
     bool masked;
     uint32_t eisn;
     uint64_t kvm_src;
 
     assert(xive_eas_is_valid(eas));
 
     end_idx = xive_get_field64(EAS_END_INDEX, eas->w);
     end_blk = xive_get_field64(EAS_END_BLOCK, eas->w);
     eisn = xive_get_field64(EAS_END_DATA, eas->w);
     masked = xive_eas_is_masked(eas);
 
     spapr_xive_end_to_target(end_blk, end_idx, &server, &priority);
 
     kvm_src = priority << KVM_XIVE_SOURCE_PRIORITY_SHIFT &
         KVM_XIVE_SOURCE_PRIORITY_MASK;
     kvm_src |= server << KVM_XIVE_SOURCE_SERVER_SHIFT &
         KVM_XIVE_SOURCE_SERVER_MASK;
     kvm_src |= ((uint64_t) masked << KVM_XIVE_SOURCE_MASKED_SHIFT) &
         KVM_XIVE_SOURCE_MASKED_MASK;
     kvm_src |= ((uint64_t)eisn << KVM_XIVE_SOURCE_EISN_SHIFT) &
         KVM_XIVE_SOURCE_EISN_MASK;
 
     return kvm_device_access(xive->fd, KVM_DEV_XIVE_GRP_SOURCE_CONFIG, lisn,
                              &kvm_src, true, errp);
 }
 
 void kvmppc_xive_sync_source(SpaprXive *xive, uint32_t lisn, Error **errp)
 {
     kvm_device_access(xive->fd, KVM_DEV_XIVE_GRP_SOURCE_SYNC, lisn,
                       NULL, true, errp);
 }
 
 /*
  * At reset, the interrupt sources are simply created and MASKED. We
  * only need to inform the KVM XIVE device about their type: LSI or
  * MSI.
  */
 int kvmppc_xive_source_reset_one(XiveSource *xsrc, int srcno, Error **errp)
 {
     SpaprXive *xive = SPAPR_XIVE(xsrc->xive);
     uint64_t state = 0;
 
     trace_kvm_xive_source_reset(srcno);
 
     assert(xive->fd != -1);
 
     if (xive_source_irq_is_lsi(xsrc, srcno)) {
         state |= KVM_XIVE_LEVEL_SENSITIVE;
         if (xive_source_is_asserted(xsrc, srcno)) {
             state |= KVM_XIVE_LEVEL_ASSERTED;
         }
     }
 
     return kvm_device_access(xive->fd, KVM_DEV_XIVE_GRP_SOURCE, srcno, &state,
                              true, errp);
 }
 
 static int kvmppc_xive_source_reset(XiveSource *xsrc, Error **errp)
 {
     SpaprXive *xive = SPAPR_XIVE(xsrc->xive);
     int i;
 
     for (i = 0; i < xsrc->nr_irqs; i++) {
         int ret;
 
         if (!xive_eas_is_valid(&xive->eat[i])) {
             continue;
         }
 
         ret = kvmppc_xive_source_reset_one(xsrc, i, errp);
         if (ret < 0) {
             return ret;
         }
     }
 
     return 0;
 }
 
 /*
  * This is used to perform the magic loads on the ESB pages, described
  * in xive.h.
  *
  * Memory barriers should not be needed for loads (no store for now).
  */
 static uint64_t xive_esb_rw(XiveSource *xsrc, int srcno, uint32_t offset,
                             uint64_t data, bool write)
 {
     uint64_t *addr = xsrc->esb_mmap + xive_source_esb_mgmt(xsrc, srcno) +
         offset;
 
     if (write) {
         *addr = cpu_to_be64(data);
         return -1;
     } else {
         /* Prevent the compiler from optimizing away the load */
         volatile uint64_t value = be64_to_cpu(*addr);
         return value;
     }
 }
 
 static uint8_t xive_esb_read(XiveSource *xsrc, int srcno, uint32_t offset)
 {
     return xive_esb_rw(xsrc, srcno, offset, 0, 0) & 0x3;
 }
 
 static void kvmppc_xive_esb_trigger(XiveSource *xsrc, int srcno)
 {
     xive_esb_rw(xsrc, srcno, 0, 0, true);
 }
 
 uint64_t kvmppc_xive_esb_rw(XiveSource *xsrc, int srcno, uint32_t offset,
                             uint64_t data, bool write)
 {
     if (write) {
         return xive_esb_rw(xsrc, srcno, offset, data, 1);
     }
 
     /*
      * Special Load EOI handling for LSI sources. Q bit is never set
      * and the interrupt should be re-triggered if the level is still
      * asserted.
      */
     if (xive_source_irq_is_lsi(xsrc, srcno) &&
         offset == XIVE_ESB_LOAD_EOI) {
         xive_esb_read(xsrc, srcno, XIVE_ESB_SET_PQ_00);
         if (xive_source_is_asserted(xsrc, srcno)) {
             kvmppc_xive_esb_trigger(xsrc, srcno);
         }
         return 0;
     } else {
         return xive_esb_rw(xsrc, srcno, offset, 0, 0);
     }
 }
 
 static void kvmppc_xive_source_get_state(XiveSource *xsrc)
 {
     SpaprXive *xive = SPAPR_XIVE(xsrc->xive);
     int i;
 
     for (i = 0; i < xsrc->nr_irqs; i++) {
         uint8_t pq;
 
         if (!xive_eas_is_valid(&xive->eat[i])) {
             continue;
         }
 
         /* Perform a load without side effect to retrieve the PQ bits */
         pq = xive_esb_read(xsrc, i, XIVE_ESB_GET);
 
         /* and save PQ locally */
         xive_source_esb_set(xsrc, i, pq);
     }
 }
 
 void kvmppc_xive_source_set_irq(void *opaque, int srcno, int val)
 {
     XiveSource *xsrc = opaque;
 
     if (!xive_source_irq_is_lsi(xsrc, srcno)) {
         if (!val) {
             return;
         }
     } else {
         xive_source_set_asserted(xsrc, srcno, val);
     }
 
     kvmppc_xive_esb_trigger(xsrc, srcno);
 }
 
 /*
  * sPAPR XIVE interrupt controller (KVM)
  */
 int kvmppc_xive_get_queue_config(SpaprXive *xive, uint8_t end_blk,
                                  uint32_t end_idx, XiveEND *end,
                                  Error **errp)
 {
     struct kvm_ppc_xive_eq kvm_eq = { 0 };
     uint64_t kvm_eq_idx;
     uint8_t priority;
     uint32_t server;
     int ret;
 
     assert(xive_end_is_valid(end));
 
     /* Encode the tuple (server, prio) as a KVM EQ index */
     spapr_xive_end_to_target(end_blk, end_idx, &server, &priority);
 
     kvm_eq_idx = priority << KVM_XIVE_EQ_PRIORITY_SHIFT &
             KVM_XIVE_EQ_PRIORITY_MASK;
     kvm_eq_idx |= server << KVM_XIVE_EQ_SERVER_SHIFT &
         KVM_XIVE_EQ_SERVER_MASK;
 
     ret = kvm_device_access(xive->fd, KVM_DEV_XIVE_GRP_EQ_CONFIG, kvm_eq_idx,
                             &kvm_eq, false, errp);
     if (ret < 0) {
         return ret;
     }
 
     /*
      * The EQ index and toggle bit are updated by HW. These are the
      * only fields from KVM we want to update QEMU with. The other END
      * fields should already be in the QEMU END table.
      */
     end->w1 = xive_set_field32(END_W1_GENERATION, 0ul, kvm_eq.qtoggle) |
         xive_set_field32(END_W1_PAGE_OFF, 0ul, kvm_eq.qindex);
 
     return 0;
 }
 
 int kvmppc_xive_set_queue_config(SpaprXive *xive, uint8_t end_blk,
                                  uint32_t end_idx, XiveEND *end,
                                  Error **errp)
 {
     struct kvm_ppc_xive_eq kvm_eq = { 0 };
     uint64_t kvm_eq_idx;
     uint8_t priority;
     uint32_t server;
 
     /*
      * Build the KVM state from the local END structure.
      */
 
     kvm_eq.flags = 0;
     if (xive_get_field32(END_W0_UCOND_NOTIFY, end->w0)) {
         kvm_eq.flags |= KVM_XIVE_EQ_ALWAYS_NOTIFY;
     }
 
     /*
      * If the hcall is disabling the EQ, set the size and page address
      * to zero. When migrating, only valid ENDs are taken into
      * account.
      */
     if (xive_end_is_valid(end)) {
         kvm_eq.qshift = xive_get_field32(END_W0_QSIZE, end->w0) + 12;
         kvm_eq.qaddr  = xive_end_qaddr(end);
         /*
          * The EQ toggle bit and index should only be relevant when
          * restoring the EQ state
          */
         kvm_eq.qtoggle = xive_get_field32(END_W1_GENERATION, end->w1);
         kvm_eq.qindex  = xive_get_field32(END_W1_PAGE_OFF, end->w1);
     } else {
         kvm_eq.qshift = 0;
         kvm_eq.qaddr  = 0;
     }
 
     /* Encode the tuple (server, prio) as a KVM EQ index */
     spapr_xive_end_to_target(end_blk, end_idx, &server, &priority);
 
     kvm_eq_idx = priority << KVM_XIVE_EQ_PRIORITY_SHIFT &
             KVM_XIVE_EQ_PRIORITY_MASK;
     kvm_eq_idx |= server << KVM_XIVE_EQ_SERVER_SHIFT &
         KVM_XIVE_EQ_SERVER_MASK;
 
     return
         kvm_device_access(xive->fd, KVM_DEV_XIVE_GRP_EQ_CONFIG, kvm_eq_idx,
                           &kvm_eq, true, errp);
 }
 
 void kvmppc_xive_reset(SpaprXive *xive, Error **errp)
 {
     kvm_device_access(xive->fd, KVM_DEV_XIVE_GRP_CTRL, KVM_DEV_XIVE_RESET,
                       NULL, true, errp);
 }
 
 static int kvmppc_xive_get_queues(SpaprXive *xive, Error **errp)
 {
     int i;
     int ret;
 
     for (i = 0; i < xive->nr_ends; i++) {
         if (!xive_end_is_valid(&xive->endt[i])) {
             continue;
         }
 
         ret = kvmppc_xive_get_queue_config(xive, SPAPR_XIVE_BLOCK_ID, i,
                                            &xive->endt[i], errp);
         if (ret < 0) {
             return ret;
         }
     }
 
     return 0;
 }
 
 /*
  * The primary goal of the XIVE VM change handler is to mark the EQ
  * pages dirty when all XIVE event notifications have stopped.
  *
  * Whenever the VM is stopped, the VM change handler sets the source
  * PQs to PENDING to stop the flow of events and to possibly catch a
  * triggered interrupt occuring while the VM is stopped. The previous
  * state is saved in anticipation of a migration. The XIVE controller
  * is then synced through KVM to flush any in-flight event
  * notification and stabilize the EQs.
  *
  * At this stage, we can mark the EQ page dirty and let a migration
  * sequence transfer the EQ pages to the destination, which is done
  * just after the stop state.
  *
  * The previous configuration of the sources is restored when the VM
  * runs again. If an interrupt was queued while the VM was stopped,
  * simply generate a trigger.
  */
 static void kvmppc_xive_change_state_handler(void *opaque, bool running,
                                              RunState state)
 {
     SpaprXive *xive = opaque;
     XiveSource *xsrc = &xive->source;
     Error *local_err = NULL;
     int i;
 
     /*
      * Restore the sources to their initial state. This is called when
      * the VM resumes after a stop or a migration.
      */
     if (running) {
         for (i = 0; i < xsrc->nr_irqs; i++) {
             uint8_t pq;
             uint8_t old_pq;
 
             if (!xive_eas_is_valid(&xive->eat[i])) {
                 continue;
             }
 
             pq = xive_source_esb_get(xsrc, i);
             old_pq = xive_esb_read(xsrc, i, XIVE_ESB_SET_PQ_00 + (pq << 8));
 
             /*
              * An interrupt was queued while the VM was stopped,
              * generate a trigger.
              */
             if (pq == XIVE_ESB_RESET && old_pq == XIVE_ESB_QUEUED) {
                 kvmppc_xive_esb_trigger(xsrc, i);
             }
         }
 
         return;
     }
 
     /*
      * Mask the sources, to stop the flow of event notifications, and
      * save the PQs locally in the XiveSource object. The XiveSource
      * state will be collected later on by its vmstate handler if a
      * migration is in progress.
      */
     for (i = 0; i < xsrc->nr_irqs; i++) {
         uint8_t pq;
 
         if (!xive_eas_is_valid(&xive->eat[i])) {
             continue;
         }
 
         pq = xive_esb_read(xsrc, i, XIVE_ESB_GET);
 
         /*
          * PQ is set to PENDING to possibly catch a triggered
          * interrupt occuring while the VM is stopped (hotplug event
          * for instance) .
          */
         if (pq != XIVE_ESB_OFF) {
             pq = xive_esb_read(xsrc, i, XIVE_ESB_SET_PQ_10);
         }
         xive_source_esb_set(xsrc, i, pq);
     }
 
     /*
      * Sync the XIVE controller in KVM, to flush in-flight event
      * notification that should be enqueued in the EQs and mark the
      * XIVE EQ pages dirty to collect all updates.
      */
     kvm_device_access(xive->fd, KVM_DEV_XIVE_GRP_CTRL,
                       KVM_DEV_XIVE_EQ_SYNC, NULL, true, &local_err);
     if (local_err) {
         error_report_err(local_err);
         return;
     }
 }
 
 void kvmppc_xive_synchronize_state(SpaprXive *xive, Error **errp)
 {
     assert(xive->fd != -1);
 
     /*
      * When the VM is stopped, the sources are masked and the previous
      * state is saved in anticipation of a migration. We should not
      * synchronize the source state in that case else we will override
      * the saved state.
      */
     if (runstate_is_running()) {
         kvmppc_xive_source_get_state(&xive->source);
     }
 
     /* EAT: there is no extra state to query from KVM */
 
     /* ENDT */
     kvmppc_xive_get_queues(xive, errp);
 }
 
 /*
  * The SpaprXive 'pre_save' method is called by the vmstate handler of
  * the SpaprXive model, after the XIVE controller is synced in the VM
  * change handler.
  */
 int kvmppc_xive_pre_save(SpaprXive *xive)
 {
     Error *local_err = NULL;
     int ret;
 
     assert(xive->fd != -1);
 
     /* EAT: there is no extra state to query from KVM */
 
     /* ENDT */
     ret = kvmppc_xive_get_queues(xive, &local_err);
     if (ret < 0) {
         error_report_err(local_err);
         return ret;
     }
 
     return 0;
 }
 
 /*
  * The SpaprXive 'post_load' method is not called by a vmstate
  * handler. It is called at the sPAPR machine level at the end of the
  * migration sequence by the sPAPR IRQ backend 'post_load' method,
  * when all XIVE states have been transferred and loaded.
  */
 int kvmppc_xive_post_load(SpaprXive *xive, int version_id)
 {
     Error *local_err = NULL;
     CPUState *cs;
     int i;
     int ret;
 
     /* The KVM XIVE device should be in use */
     assert(xive->fd != -1);
 
     /* Restore the ENDT first. The targetting depends on it. */
     for (i = 0; i < xive->nr_ends; i++) {
         if (!xive_end_is_valid(&xive->endt[i])) {
             continue;
         }
 
         ret = kvmppc_xive_set_queue_config(xive, SPAPR_XIVE_BLOCK_ID, i,
                                            &xive->endt[i], &local_err);
         if (ret < 0) {
             goto fail;
         }
     }
 
     /* Restore the EAT */
     for (i = 0; i < xive->nr_irqs; i++) {
         if (!xive_eas_is_valid(&xive->eat[i])) {
             continue;
         }
 
         /*
          * We can only restore the source config if the source has been
          * previously set in KVM. Since we don't do that for all interrupts
          * at reset time anymore, let's do it now.
          */
         ret = kvmppc_xive_source_reset_one(&xive->source, i, &local_err);
         if (ret < 0) {
             goto fail;
         }
 
         ret = kvmppc_xive_set_source_config(xive, i, &xive->eat[i], &local_err);
         if (ret < 0) {
             goto fail;
         }
     }
 
     /*
      * Restore the thread interrupt contexts of initial CPUs.
      *
      * The context of hotplugged CPUs is restored later, by the
      * 'post_load' handler of the XiveTCTX model because they are not
      * available at the time the SpaprXive 'post_load' method is
      * called. We can not restore the context of all CPUs in the
      * 'post_load' handler of XiveTCTX because the machine is not
      * necessarily connected to the KVM device at that time.
      */
     CPU_FOREACH(cs) {
         PowerPCCPU *cpu = POWERPC_CPU(cs);
 
         ret = kvmppc_xive_cpu_set_state(spapr_cpu_state(cpu)->tctx, &local_err);
         if (ret < 0) {
             goto fail;
         }
     }
 
     /* The source states will be restored when the machine starts running */
     return 0;
 
 fail:
     error_report_err(local_err);
     return ret;
 }
 
 /* Returns MAP_FAILED on error and sets errno */
 static void *kvmppc_xive_mmap(SpaprXive *xive, int pgoff, size_t len,
                               Error **errp)
 {
     void *addr;
     uint32_t page_shift = 16; /* TODO: fix page_shift */
 
     addr = mmap(NULL, len, PROT_WRITE | PROT_READ, MAP_SHARED, xive->fd,
                 pgoff << page_shift);
     if (addr == MAP_FAILED) {
         error_setg_errno(errp, errno, "XIVE: unable to set memory mapping");
     }
 
     return addr;
 }
 
 /*
  * All the XIVE memory regions are now backed by mappings from the KVM
  * XIVE device.
  */
 int kvmppc_xive_connect(SpaprInterruptController *intc, uint32_t nr_servers,
                         Error **errp)
 {
     SpaprXive *xive = SPAPR_XIVE(intc);
     XiveSource *xsrc = &xive->source;
     size_t esb_len = xive_source_esb_len(xsrc);
     size_t tima_len = 4ull << TM_SHIFT;
     CPUState *cs;
     int fd;
     void *addr;
     int ret;
 
     /*
      * The KVM XIVE device already in use. This is the case when
      * rebooting under the XIVE-only interrupt mode.
      */
     if (xive->fd != -1) {
         return 0;
     }
 
     if (!kvmppc_has_cap_xive()) {
         error_setg(errp, "IRQ_XIVE capability must be present for KVM");
         return -1;
     }
 
     /* First, create the KVM XIVE device */
     fd = kvm_create_device(kvm_state, KVM_DEV_TYPE_XIVE, false);
     if (fd < 0) {
         error_setg_errno(errp, -fd, "XIVE: error creating KVM device");
         return -1;
     }
     xive->fd = fd;
 
     /* Tell KVM about the # of VCPUs we may have */
     if (kvm_device_check_attr(xive->fd, KVM_DEV_XIVE_GRP_CTRL,
                               KVM_DEV_XIVE_NR_SERVERS)) {
         ret = kvm_device_access(xive->fd, KVM_DEV_XIVE_GRP_CTRL,
                                 KVM_DEV_XIVE_NR_SERVERS, &nr_servers, true,
                                 errp);
         if (ret < 0) {
             goto fail;
         }
     }
 
     /*
      * 1. Source ESB pages - KVM mapping
      */
     addr = kvmppc_xive_mmap(xive, KVM_XIVE_ESB_PAGE_OFFSET, esb_len, errp);
     if (addr == MAP_FAILED) {
         goto fail;
     }
     xsrc->esb_mmap = addr;
 
     memory_region_init_ram_device_ptr(&xsrc->esb_mmio_kvm, OBJECT(xsrc),
                                       "xive.esb-kvm", esb_len, xsrc->esb_mmap);
     memory_region_add_subregion_overlap(&xsrc->esb_mmio, 0,
                                         &xsrc->esb_mmio_kvm, 1);
 
     /*
      * 2. END ESB pages (No KVM support yet)
      */
 
     /*
      * 3. TIMA pages - KVM mapping
      */
     addr = kvmppc_xive_mmap(xive, KVM_XIVE_TIMA_PAGE_OFFSET, tima_len, errp);
     if (addr == MAP_FAILED) {
         goto fail;
     }
     xive->tm_mmap = addr;
 
     memory_region_init_ram_device_ptr(&xive->tm_mmio_kvm, OBJECT(xive),
                                       "xive.tima", tima_len, xive->tm_mmap);
     memory_region_add_subregion_overlap(&xive->tm_mmio, 0,
                                         &xive->tm_mmio_kvm, 1);
 
     xive->change = qemu_add_vm_change_state_handler(
         kvmppc_xive_change_state_handler, xive);
 
     /* Connect the presenters to the initial VCPUs of the machine */
     CPU_FOREACH(cs) {
         PowerPCCPU *cpu = POWERPC_CPU(cs);
 
         ret = kvmppc_xive_cpu_connect(spapr_cpu_state(cpu)->tctx, errp);
         if (ret < 0) {
             goto fail;
         }
     }
 
     /* Update the KVM sources */
     ret = kvmppc_xive_source_reset(xsrc, errp);
     if (ret < 0) {
         goto fail;
     }
 
     kvm_kernel_irqchip = true;
     kvm_msi_via_irqfd_allowed = true;
     kvm_gsi_direct_mapping = true;
     return 0;
 
 fail:
     kvmppc_xive_disconnect(intc);
     return -1;
 }
 
 void kvmppc_xive_disconnect(SpaprInterruptController *intc)
 {
     SpaprXive *xive = SPAPR_XIVE(intc);
     XiveSource *xsrc;
     size_t esb_len;
 
     assert(xive->fd != -1);
 
     /* Clear the KVM mapping */
     xsrc = &xive->source;
     esb_len = xive_source_esb_len(xsrc);
 
     if (xsrc->esb_mmap) {
         memory_region_del_subregion(&xsrc->esb_mmio, &xsrc->esb_mmio_kvm);
         object_unparent(OBJECT(&xsrc->esb_mmio_kvm));
         munmap(xsrc->esb_mmap, esb_len);
         xsrc->esb_mmap = NULL;
     }
 
     if (xive->tm_mmap) {
         memory_region_del_subregion(&xive->tm_mmio, &xive->tm_mmio_kvm);
         object_unparent(OBJECT(&xive->tm_mmio_kvm));
         munmap(xive->tm_mmap, 4ull << TM_SHIFT);
         xive->tm_mmap = NULL;
     }
 
     /*
      * When the KVM device fd is closed, the KVM device is destroyed
      * and removed from the list of devices of the VM. The VCPU
      * presenters are also detached from the device.
      */
     close(xive->fd);
     xive->fd = -1;
 
     kvm_kernel_irqchip = false;
     kvm_msi_via_irqfd_allowed = false;
     kvm_gsi_direct_mapping = false;
 
     /* Clear the local list of presenter (hotplug) */
     kvm_cpu_disable_all();
 
     /* VM Change state handler is not needed anymore */
     if (xive->change) {
         qemu_del_vm_change_state_handler(xive->change);
         xive->change = NULL;
     }
 }