trace-events (2745B)
1 # See docs/devel/tracing.rst for syntax documentation. 2 3 # rc4030.c 4 jazzio_read(uint64_t addr, uint32_t ret) "read reg[0x%"PRIx64"] = 0x%x" 5 jazzio_write(uint64_t addr, uint32_t val) "write reg[0x%"PRIx64"] = 0x%x" 6 rc4030_read(uint64_t addr, uint32_t ret) "read reg[0x%"PRIx64"] = 0x%x" 7 rc4030_write(uint64_t addr, uint32_t val) "write reg[0x%"PRIx64"] = 0x%x" 8 9 # sparc32_dma.c 10 ledma_memory_read(uint64_t addr, int len) "DMA read addr 0x%"PRIx64 " len %d" 11 ledma_memory_write(uint64_t addr, int len) "DMA write addr 0x%"PRIx64 " len %d" 12 sparc32_dma_set_irq_raise(void) "Raise IRQ" 13 sparc32_dma_set_irq_lower(void) "Lower IRQ" 14 espdma_memory_read(uint32_t addr, int len) "DMA read addr 0x%08x len %d" 15 espdma_memory_write(uint32_t addr, int len) "DMA write addr 0x%08x len %d" 16 sparc32_dma_mem_readl(uint64_t addr, uint32_t ret) "read dmareg 0x%"PRIx64": 0x%08x" 17 sparc32_dma_mem_writel(uint64_t addr, uint32_t old, uint32_t val) "write dmareg 0x%"PRIx64": 0x%08x -> 0x%08x" 18 sparc32_dma_enable_raise(void) "Raise DMA enable" 19 sparc32_dma_enable_lower(void) "Lower DMA enable" 20 21 # i8257.c 22 i8257_unregistered_dma(int nchan, int dma_pos, int dma_len) "unregistered DMA channel used nchan=%d dma_pos=%d dma_len=%d" 23 24 # pl330.c 25 pl330_fault(void *ptr, uint32_t flags) "ch: %p, flags: 0x%"PRIx32 26 pl330_fault_abort(void) "abort interrupt raised" 27 pl330_dmaend(void) "DMA ending" 28 pl330_dmago(void) "DMA run" 29 pl330_dmald(uint8_t chan, uint32_t addr, uint32_t size, uint32_t num, char ch) "channel:%"PRId8" address:0x%08"PRIx32" size:0x%"PRIx32" num:%"PRId32"%c" 30 pl330_dmakill(void) "abort interrupt lowered" 31 pl330_dmalpend(uint8_t nf, uint8_t bs, uint8_t lc, uint8_t ch, uint8_t flag) "nf=0x%02x bs=0x%02x lc=0x%02x ch=0x%02x flag=0x%02x" 32 pl330_dmalpiter(void) "loop reiteration" 33 pl330_dmalpfallthrough(void) "loop fallthrough" 34 pl330_dmasev_evirq(uint8_t ev_id) "event interrupt raised %"PRId8 35 pl330_dmasev_event(uint8_t ev_id) "event raised %"PRId8 36 pl330_dmast(uint8_t chan, uint32_t addr, uint32_t sz, uint32_t num, char ch) "channel:%"PRId8" address:0x%08"PRIx32" size:0x%"PRIx32" num:%"PRId32" %c" 37 pl330_dmawfe(uint8_t ev_id) "event lowered 0x%"PRIx8 38 pl330_chan_exec_undef(void) "undefined instruction" 39 pl330_exec_cycle(uint32_t addr, uint32_t size) "PL330 read from memory @0x%08"PRIx32" (size = 0x%08"PRIx32")" 40 pl330_hexdump(uint32_t offset, char *str) " 0x%04"PRIx32":%s" 41 pl330_exec(void) "pl330_exec" 42 pl330_debug_exec(uint8_t ch) "chan id: 0x%"PRIx8 43 pl330_debug_exec_stall(void) "stall of debug instruction not implemented" 44 pl330_iomem_write(uint32_t offset, uint32_t value) "addr: 0x%08"PRIx32" data: 0x%08"PRIx32 45 pl330_iomem_write_clr(int i) "event interrupt lowered %d" 46 pl330_iomem_read(uint32_t addr, uint32_t data) "addr: 0x%08"PRIx32" data: 0x%08"PRIx32