forked from mirror/doctest
You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
191 lines
10 KiB
Markdown
191 lines
10 KiB
Markdown
## Assertion macros
|
|
|
|
Most test frameworks have a large collection of assertion macros to capture all possible conditional forms (```_EQUALS```, ```_NOTEQUALS```, ```_GREATER_THAN``` etc).
|
|
|
|
**doctest** is different (but it's like [**Catch**](https://github.com/catchorg/Catch2) in this regard). Because it decomposes comparison expressions most of these forms are reduced to one or two that you will use all the time. That said, there is a rich set of auxiliary macros as well.
|
|
|
|
There are 3 levels of assert severity for all assertion macros:
|
|
|
|
- ```REQUIRE``` - this level will immediately quit the test case if the assert fails and will mark the test case as failed.
|
|
- ```CHECK``` - this level will mark the test case as failed if the assert fails but will continue with the test case.
|
|
- ```WARN``` - this level will only print a message if the assert fails but will not mark the test case as failed.
|
|
|
|
The ```CHECK``` level is mostly useful if you have a series of essentially orthogonal assertions and it is useful to see all the results rather than stopping at the first failure.
|
|
|
|
All asserts evaluate the expressions only once and if they fail - the values are [**stringified**](stringification.md) properly.
|
|
|
|
Since **doctest** is [**thread-safe**](faq.md#is-doctest-thread-aware) all asserts and [**logging**](logging.md) macros can be used in threads spawned from test cases.
|
|
|
|
Note that the ```REQUIRE``` level of asserts uses exceptions to end the current test case. It might be dangerous to use this level of asserts inside destructors of user-defined classes - if a destructor is called during stack unwinding due to an exception and a ```REQUIRE``` assert fails then the program will terminate. Also since C++11 all destructors are by default ```noexcept(true)``` unless specified otherwise so such an assert will lead to ```std::terminate()``` being called.
|
|
|
|
## Expression decomposing asserts
|
|
|
|
These are of the form ```CHECK(expression)``` (Same for ```REQUIRE``` and ```WARN```).
|
|
|
|
```expression``` can be a binary comparison like ```a == b``` or just a single thing like ```vec.isEmpty()```.
|
|
|
|
If an exception is thrown it is caught, reported, and counted as a failure (unless the assert is of level ```WARN```).
|
|
|
|
Examples:
|
|
|
|
```c++
|
|
CHECK(flags == state::alive | state::moving);
|
|
CHECK(thisReturnsTrue());
|
|
REQUIRE(i < 42);
|
|
```
|
|
|
|
- Negating asserts - ```<LEVEL>_FALSE(expression)``` - evaluates the expression and records the _logical NOT_ of the result.
|
|
|
|
These forms exist as a workaround for the fact that ```!``` prefixed expressions cannot be decomposed properly.
|
|
|
|
Example:
|
|
|
|
```c++
|
|
REQUIRE_FALSE(thisReturnsFalse());
|
|
```
|
|
|
|
- Using the [**```DOCTEST_CONFIG_SUPER_FAST_ASSERTS```**](configuration.md#doctest_config_super_fast_asserts) config option can make compilation of asserts up to [**31-63%**](benchmarks.md#cost-of-an-assertion-macro) faster!
|
|
- These asserts also have a ```_MESSAGE``` form - like ```CHECK_MESSAGE(expression, message)``` which is basically a code block ```{}``` with a scoped [**```INFO()```**](logging.md#info) logging macro together with the ```CHECK``` macro - that way the message will be relevant only to that assert. The binary/unary asserts don't have this variation yet.
|
|
|
|
Examples:
|
|
|
|
```c++
|
|
INFO("this is relevant to all asserts, and here is some var: ", local);
|
|
|
|
CHECK_MESSAGE(a < b, "relevant only to this assert ", other_local, " more text!");
|
|
|
|
CHECK(b < c); // here only the first INFO() will be relevant
|
|
```
|
|
|
|
For more information about the ```INFO()``` macro visit the [logging page](logging.md).
|
|
|
|
## Binary and unary asserts
|
|
|
|
These asserts don't use templates to decompose the comparison expressions for the left and right parts.
|
|
|
|
These have the same guarantees as the expression decomposing ones but [**57-68% faster**](benchmarks.md#cost-of-an-assertion-macro) for compilation.
|
|
|
|
```<LEVEL>``` is one of 3 possible: ```REQUIRE```/```CHECK```/```WARN```.
|
|
|
|
- ```<LEVEL>_EQ(left, right)``` - same as ```<LEVEL>(left == right)```
|
|
- ```<LEVEL>_NE(left, right)``` - same as ```<LEVEL>(left != right)```
|
|
- ```<LEVEL>_GT(left, right)``` - same as ```<LEVEL>(left > right)```
|
|
- ```<LEVEL>_LT(left, right)``` - same as ```<LEVEL>(left < right)```
|
|
- ```<LEVEL>_GE(left, right)``` - same as ```<LEVEL>(left >= right)```
|
|
- ```<LEVEL>_LE(left, right)``` - same as ```<LEVEL>(left <= right)```
|
|
- ```<LEVEL>_UNARY(expr)``` - same as ```<LEVEL>(expr)```
|
|
- ```<LEVEL>_UNARY_FALSE(expr)``` - same as ```<LEVEL>_FALSE(expr)```
|
|
|
|
Using the [**```DOCTEST_CONFIG_SUPER_FAST_ASSERTS```**](configuration.md#doctest_config_super_fast_asserts) config option can make the binary asserts to compile up to [**84-91%**](benchmarks.md#cost-of-an-assertion-macro) faster!
|
|
|
|
## Exceptions
|
|
|
|
```<LEVEL>``` is one of 3 possible: ```REQUIRE```/```CHECK```/```WARN```.
|
|
|
|
- ```<LEVEL>_THROWS(expression)```
|
|
|
|
Expects that an exception (of any type) is thrown during evaluation of the expression.
|
|
|
|
- ```<LEVEL>_THROWS_AS(expression, exception_type)```
|
|
|
|
Expects that an exception of the _specified type_ is thrown during evaluation of the expression.
|
|
|
|
Note that ```const``` and ```&``` are added to the exception type if missing (users shouldn't care) - the standard practice for exceptions in C++ is ```Throw by value, catch by (const) reference```.
|
|
|
|
```c++
|
|
CHECK_THROWS_AS(func(), const std::exception&);
|
|
CHECK_THROWS_AS(func(), std::exception); // same as above
|
|
```
|
|
|
|
- ```<LEVEL>_THROWS_WITH(expression, c_string)```
|
|
|
|
Expects that an exception is thrown during evaluation of the expression and is successfully translated to the _specified c string_ (see [**translating exceptions**](stringification.md#translating-exceptions)).
|
|
|
|
```c++
|
|
CHECK_THROWS_WITH(func(), "invalid operation!");
|
|
```
|
|
|
|
- ```<LEVEL>_THROWS_WITH_AS(expression, c_string, exception_type)```
|
|
|
|
This is a combination of ```<LEVEL>_THROWS_WITH``` and ```<LEVEL>_THROWS_AS```.
|
|
|
|
```c++
|
|
CHECK_THROWS_WITH_AS(func(), "invalid operation!", std::runtime_error);
|
|
```
|
|
|
|
- ```<LEVEL>_NOTHROW(expression)```
|
|
|
|
Expects that no exception is thrown during evaluation of the expression.
|
|
|
|
Note that these asserts also have a ```_MESSAGE``` form - like ```CHECK_THROWS_MESSAGE(expression, message)``` - these work identically to the ```_MESSAGE``` form of the normal macros (```CHECK_MESSAGE(a < b, "this shouldn't fail")```) described earlier.
|
|
|
|
One may use the [**```DOCTEST_CONFIG_VOID_CAST_EXPRESSIONS```**](configuration.md#doctest_config_void_cast_expressions) config identifier to cast the expression in these asserts to void to avoid warnings or other issues - for example nodiscard statements whose result isn't checked. This will however limit the ability to write entire ```{}``` blocks of code as the expression (or multiple statements) but in that case a simple lambda can be used. This should have been the default behavior from day 1 of the framework...
|
|
|
|
## Using asserts out of a testing context
|
|
|
|
Asserts can be used outside of a testing context (in code not called from a ```TEST_CASE()```) instead of [```assert()```](https://en.cppreference.com/w/cpp/error/assert).
|
|
|
|
A ```doctest::Context``` object still has to be created somewhere and set as the default one using the ```setAsDefaultForAssertsOutOfTestCases()``` method - and then asserts will work. A handler can be registered by calling the ```setAssertHandler()``` method on the context object. If no handler is set then ```std::abort()``` is called on failure.
|
|
|
|
The results would be best when using the [**```DOCTEST_CONFIG_SUPER_FAST_ASSERTS```**](configuration.md#doctest_config_super_fast_asserts) config identifier.
|
|
|
|
Checkout the [**example**](../../examples/all_features/asserts_used_outside_of_tests.cpp) showcasing how that is done. For more information see the [**issue for the feature request**](https://github.com/doctest/doctest/issues/114).
|
|
|
|
Currently [**logging macros**](logging.md) cannot be used for extra context for asserts outside of a test run. That means that the ```_MESSAGE``` variants of asserts are also not usable - since they are just a packed ```INFO()``` with an assert right after it.
|
|
|
|
## String containment
|
|
|
|
```doctest::Contains``` can be used to check whether the string passed to its constructor is contained within the string it is compared with. Here's a simple example:
|
|
|
|
```c++
|
|
REQUIRE("foobar" == doctest::Contains("foo"));
|
|
```
|
|
|
|
It can also be used with the ```THROWS_WITH``` family of assertion macros to check whether the thrown exception [translated to a string](stringification.md#translating-exceptions) contains the provided string. Here's another example:
|
|
```c++
|
|
REQUIRE_THROWS_WITH(func(), doctest::Contains("Oopsie"));
|
|
```
|
|
|
|
## Floating point comparisons
|
|
|
|
When comparing floating point numbers - especially if at least one of them has been computed - great care must be taken to allow for rounding errors and inexact representations.
|
|
|
|
**doctest** provides a way to perform tolerant comparisons of floating point values through the use of a wrapper class called ```doctest::Approx```. ```doctest::Approx``` can be used on either side of a comparison expression. It overloads the comparisons operators to take a relative tolerance into account. Here's a simple example:
|
|
|
|
```c++
|
|
REQUIRE(performComputation() == doctest::Approx(2.1));
|
|
```
|
|
|
|
By default a small epsilon value (relative - in percentages) is used that covers many simple cases of rounding errors. When this is insufficient the epsilon value (the amount within which a difference either way is ignored) can be specified by calling the ```epsilon()``` method on the ```doctest::Approx``` instance. e.g.:
|
|
|
|
```c++
|
|
REQUIRE(22.0/7 == doctest::Approx(3.141).epsilon(0.01)); // allow for a 1% error
|
|
```
|
|
|
|
When dealing with very large or very small numbers it can be useful to specify a scale, which can be achieved by calling the ```scale()``` method on the ```doctest::Approx``` instance.
|
|
|
|
## NaN checking
|
|
|
|
Two NaN floating point numbers do not compare equal to each other. This makes it quite inconvenient to check for NaN while capturing the value.
|
|
```c++
|
|
CHECK(std::isnan(performComputation()); // does not capture the result of the call
|
|
```
|
|
|
|
**doctest** provides `doctest::IsNaN` which can be used in assertions to check if a float (or any other floating point fundamental type) is indeed NaN, outputting the actual value if it is not.
|
|
```c++
|
|
CHECK(doctest::IsNaN(performComputation()); // captures the result!
|
|
```
|
|
|
|
`IsNaN` is able to capture the value, even if negated via `!`.
|
|
|
|
--------
|
|
|
|
- Check out the [**example**](../../examples/all_features/assertion_macros.cpp) which shows many of these macros
|
|
- Do not wrap assertion macros in ```try```/```catch``` - the REQUIRE macros throw exceptions to end the test case execution!
|
|
|
|
---------------
|
|
|
|
[Home](readme.md#reference)
|
|
|
|
<p align="center"><img src="../../scripts/data/logo/icon_2.svg"></p>
|