mirror of https://gitlab.com/qemu-project/qemu
You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
446 lines
16 KiB
C
446 lines
16 KiB
C
/*
|
|
* QTests for the ADM1272 hotswap controller
|
|
*
|
|
* Copyright 2021 Google LLC
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0-or-later
|
|
*/
|
|
|
|
#include "qemu/osdep.h"
|
|
#include <math.h>
|
|
#include "hw/i2c/pmbus_device.h"
|
|
#include "libqtest-single.h"
|
|
#include "libqos/qgraph.h"
|
|
#include "libqos/i2c.h"
|
|
#include "qapi/qmp/qdict.h"
|
|
#include "qapi/qmp/qnum.h"
|
|
#include "qemu/bitops.h"
|
|
|
|
#define TEST_ID "adm1272-test"
|
|
#define TEST_ADDR (0x10)
|
|
|
|
#define ADM1272_RESTART_TIME 0xCC
|
|
#define ADM1272_MFR_PEAK_IOUT 0xD0
|
|
#define ADM1272_MFR_PEAK_VIN 0xD1
|
|
#define ADM1272_MFR_PEAK_VOUT 0xD2
|
|
#define ADM1272_MFR_PMON_CONTROL 0xD3
|
|
#define ADM1272_MFR_PMON_CONFIG 0xD4
|
|
#define ADM1272_MFR_ALERT1_CONFIG 0xD5
|
|
#define ADM1272_MFR_ALERT2_CONFIG 0xD6
|
|
#define ADM1272_MFR_PEAK_TEMPERATURE 0xD7
|
|
#define ADM1272_MFR_DEVICE_CONFIG 0xD8
|
|
#define ADM1272_MFR_POWER_CYCLE 0xD9
|
|
#define ADM1272_MFR_PEAK_PIN 0xDA
|
|
#define ADM1272_MFR_READ_PIN_EXT 0xDB
|
|
#define ADM1272_MFR_READ_EIN_EXT 0xDC
|
|
|
|
#define ADM1272_HYSTERESIS_LOW 0xF2
|
|
#define ADM1272_HYSTERESIS_HIGH 0xF3
|
|
#define ADM1272_STATUS_HYSTERESIS 0xF4
|
|
#define ADM1272_STATUS_GPIO 0xF5
|
|
#define ADM1272_STRT_UP_IOUT_LIM 0xF6
|
|
|
|
/* Defaults */
|
|
#define ADM1272_OPERATION_DEFAULT 0x80
|
|
#define ADM1272_CAPABILITY_DEFAULT 0xB0
|
|
#define ADM1272_CAPABILITY_NO_PEC 0x30
|
|
#define ADM1272_DIRECT_MODE 0x40
|
|
#define ADM1272_HIGH_LIMIT_DEFAULT 0x0FFF
|
|
#define ADM1272_PIN_OP_DEFAULT 0x7FFF
|
|
#define ADM1272_PMBUS_REVISION_DEFAULT 0x22
|
|
#define ADM1272_MFR_ID_DEFAULT "ADI"
|
|
#define ADM1272_MODEL_DEFAULT "ADM1272-A1"
|
|
#define ADM1272_MFR_DEFAULT_REVISION "25"
|
|
#define ADM1272_DEFAULT_DATE "160301"
|
|
#define ADM1272_RESTART_TIME_DEFAULT 0x64
|
|
#define ADM1272_PMON_CONTROL_DEFAULT 0x1
|
|
#define ADM1272_PMON_CONFIG_DEFAULT 0x3F35
|
|
#define ADM1272_DEVICE_CONFIG_DEFAULT 0x8
|
|
#define ADM1272_HYSTERESIS_HIGH_DEFAULT 0xFFFF
|
|
#define ADM1272_STRT_UP_IOUT_LIM_DEFAULT 0x000F
|
|
#define ADM1272_VOLT_DEFAULT 12000
|
|
#define ADM1272_IOUT_DEFAULT 25000
|
|
#define ADM1272_PWR_DEFAULT 300 /* 12V 25A */
|
|
#define ADM1272_SHUNT 300 /* micro-ohms */
|
|
#define ADM1272_VOLTAGE_COEFF_DEFAULT 1
|
|
#define ADM1272_CURRENT_COEFF_DEFAULT 3
|
|
#define ADM1272_PWR_COEFF_DEFAULT 7
|
|
#define ADM1272_IOUT_OFFSET 0x5000
|
|
#define ADM1272_IOUT_OFFSET 0x5000
|
|
|
|
static const PMBusCoefficients adm1272_coefficients[] = {
|
|
[0] = { 6770, 0, -2 }, /* voltage, vrange 60V */
|
|
[1] = { 4062, 0, -2 }, /* voltage, vrange 100V */
|
|
[2] = { 1326, 20480, -1 }, /* current, vsense range 15mV */
|
|
[3] = { 663, 20480, -1 }, /* current, vsense range 30mV */
|
|
[4] = { 3512, 0, -2 }, /* power, vrange 60V, irange 15mV */
|
|
[5] = { 21071, 0, -3 }, /* power, vrange 100V, irange 15mV */
|
|
[6] = { 17561, 0, -3 }, /* power, vrange 60V, irange 30mV */
|
|
[7] = { 10535, 0, -3 }, /* power, vrange 100V, irange 30mV */
|
|
[8] = { 42, 31871, -1 }, /* temperature */
|
|
};
|
|
|
|
uint16_t pmbus_data2direct_mode(PMBusCoefficients c, uint32_t value)
|
|
{
|
|
/* R is usually negative to fit large readings into 16 bits */
|
|
uint16_t y = (c.m * value + c.b) * pow(10, c.R);
|
|
return y;
|
|
}
|
|
|
|
uint32_t pmbus_direct_mode2data(PMBusCoefficients c, uint16_t value)
|
|
{
|
|
/* X = (Y * 10^-R - b) / m */
|
|
uint32_t x = (value / pow(10, c.R) - c.b) / c.m;
|
|
return x;
|
|
}
|
|
|
|
|
|
static uint16_t adm1272_millivolts_to_direct(uint32_t value)
|
|
{
|
|
PMBusCoefficients c = adm1272_coefficients[ADM1272_VOLTAGE_COEFF_DEFAULT];
|
|
c.b = c.b * 1000;
|
|
c.R = c.R - 3;
|
|
return pmbus_data2direct_mode(c, value);
|
|
}
|
|
|
|
static uint32_t adm1272_direct_to_millivolts(uint16_t value)
|
|
{
|
|
PMBusCoefficients c = adm1272_coefficients[ADM1272_VOLTAGE_COEFF_DEFAULT];
|
|
c.b = c.b * 1000;
|
|
c.R = c.R - 3;
|
|
return pmbus_direct_mode2data(c, value);
|
|
}
|
|
|
|
static uint16_t adm1272_milliamps_to_direct(uint32_t value)
|
|
{
|
|
PMBusCoefficients c = adm1272_coefficients[ADM1272_CURRENT_COEFF_DEFAULT];
|
|
/* Y = (m * r_sense * x - b) * 10^R */
|
|
c.m = c.m * ADM1272_SHUNT / 1000; /* micro-ohms */
|
|
c.b = c.b * 1000;
|
|
c.R = c.R - 3;
|
|
return pmbus_data2direct_mode(c, value);
|
|
}
|
|
|
|
static uint32_t adm1272_direct_to_milliamps(uint16_t value)
|
|
{
|
|
PMBusCoefficients c = adm1272_coefficients[ADM1272_CURRENT_COEFF_DEFAULT];
|
|
c.m = c.m * ADM1272_SHUNT / 1000;
|
|
c.b = c.b * 1000;
|
|
c.R = c.R - 3;
|
|
return pmbus_direct_mode2data(c, value);
|
|
}
|
|
|
|
static uint16_t adm1272_watts_to_direct(uint32_t value)
|
|
{
|
|
PMBusCoefficients c = adm1272_coefficients[ADM1272_PWR_COEFF_DEFAULT];
|
|
c.m = c.m * ADM1272_SHUNT / 1000;
|
|
return pmbus_data2direct_mode(c, value);
|
|
}
|
|
|
|
static uint32_t adm1272_direct_to_watts(uint16_t value)
|
|
{
|
|
PMBusCoefficients c = adm1272_coefficients[ADM1272_PWR_COEFF_DEFAULT];
|
|
c.m = c.m * ADM1272_SHUNT / 1000;
|
|
return pmbus_direct_mode2data(c, value);
|
|
}
|
|
|
|
static uint16_t qmp_adm1272_get(const char *id, const char *property)
|
|
{
|
|
QDict *response;
|
|
uint64_t ret;
|
|
|
|
response = qmp("{ 'execute': 'qom-get', 'arguments': { 'path': %s, "
|
|
"'property': %s } }", id, property);
|
|
g_assert(qdict_haskey(response, "return"));
|
|
ret = qnum_get_uint(qobject_to(QNum, qdict_get(response, "return")));
|
|
qobject_unref(response);
|
|
return ret;
|
|
}
|
|
|
|
static void qmp_adm1272_set(const char *id,
|
|
const char *property,
|
|
uint16_t value)
|
|
{
|
|
QDict *response;
|
|
|
|
response = qmp("{ 'execute': 'qom-set', 'arguments': { 'path': %s, "
|
|
"'property': %s, 'value': %u } }", id, property, value);
|
|
g_assert(qdict_haskey(response, "return"));
|
|
qobject_unref(response);
|
|
}
|
|
|
|
/* PMBus commands are little endian vs i2c_set16 in i2c.h which is big endian */
|
|
static uint16_t adm1272_i2c_get16(QI2CDevice *i2cdev, uint8_t reg)
|
|
{
|
|
uint8_t resp[2];
|
|
i2c_read_block(i2cdev, reg, resp, sizeof(resp));
|
|
return (resp[1] << 8) | resp[0];
|
|
}
|
|
|
|
/* PMBus commands are little endian vs i2c_set16 in i2c.h which is big endian */
|
|
static void adm1272_i2c_set16(QI2CDevice *i2cdev, uint8_t reg, uint16_t value)
|
|
{
|
|
uint8_t data[2];
|
|
|
|
data[0] = value & 255;
|
|
data[1] = value >> 8;
|
|
i2c_write_block(i2cdev, reg, data, sizeof(data));
|
|
}
|
|
|
|
static void test_defaults(void *obj, void *data, QGuestAllocator *alloc)
|
|
{
|
|
uint16_t value, i2c_value;
|
|
int16_t err;
|
|
QI2CDevice *i2cdev = (QI2CDevice *)obj;
|
|
value = qmp_adm1272_get(TEST_ID, "vout");
|
|
err = ADM1272_VOLT_DEFAULT - value;
|
|
g_assert_cmpuint(abs(err), <, ADM1272_VOLT_DEFAULT / 20);
|
|
|
|
i2c_value = i2c_get8(i2cdev, PMBUS_OPERATION);
|
|
g_assert_cmphex(i2c_value, ==, ADM1272_OPERATION_DEFAULT);
|
|
|
|
i2c_value = i2c_get8(i2cdev, PMBUS_VOUT_MODE);
|
|
g_assert_cmphex(i2c_value, ==, ADM1272_DIRECT_MODE);
|
|
|
|
i2c_value = adm1272_i2c_get16(i2cdev, PMBUS_VOUT_OV_WARN_LIMIT);
|
|
g_assert_cmphex(i2c_value, ==, ADM1272_HIGH_LIMIT_DEFAULT);
|
|
|
|
i2c_value = adm1272_i2c_get16(i2cdev, PMBUS_VOUT_UV_WARN_LIMIT);
|
|
g_assert_cmphex(i2c_value, ==, 0);
|
|
|
|
i2c_value = adm1272_i2c_get16(i2cdev, PMBUS_IOUT_OC_WARN_LIMIT);
|
|
g_assert_cmphex(i2c_value, ==, ADM1272_HIGH_LIMIT_DEFAULT);
|
|
|
|
i2c_value = adm1272_i2c_get16(i2cdev, PMBUS_OT_FAULT_LIMIT);
|
|
g_assert_cmphex(i2c_value, ==, ADM1272_HIGH_LIMIT_DEFAULT);
|
|
|
|
i2c_value = adm1272_i2c_get16(i2cdev, PMBUS_OT_WARN_LIMIT);
|
|
g_assert_cmphex(i2c_value, ==, ADM1272_HIGH_LIMIT_DEFAULT);
|
|
|
|
i2c_value = adm1272_i2c_get16(i2cdev, PMBUS_VIN_OV_WARN_LIMIT);
|
|
g_assert_cmphex(i2c_value, ==, ADM1272_HIGH_LIMIT_DEFAULT);
|
|
|
|
i2c_value = adm1272_i2c_get16(i2cdev, PMBUS_VIN_UV_WARN_LIMIT);
|
|
g_assert_cmphex(i2c_value, ==, 0);
|
|
|
|
i2c_value = adm1272_i2c_get16(i2cdev, PMBUS_PIN_OP_WARN_LIMIT);
|
|
g_assert_cmphex(i2c_value, ==, ADM1272_PIN_OP_DEFAULT);
|
|
|
|
i2c_value = i2c_get8(i2cdev, PMBUS_REVISION);
|
|
g_assert_cmphex(i2c_value, ==, ADM1272_PMBUS_REVISION_DEFAULT);
|
|
|
|
i2c_value = i2c_get8(i2cdev, ADM1272_MFR_PMON_CONTROL);
|
|
g_assert_cmphex(i2c_value, ==, ADM1272_PMON_CONTROL_DEFAULT);
|
|
|
|
i2c_value = adm1272_i2c_get16(i2cdev, ADM1272_MFR_PMON_CONFIG);
|
|
g_assert_cmphex(i2c_value, ==, ADM1272_PMON_CONFIG_DEFAULT);
|
|
|
|
i2c_value = adm1272_i2c_get16(i2cdev, ADM1272_MFR_DEVICE_CONFIG);
|
|
g_assert_cmphex(i2c_value, ==, ADM1272_DEVICE_CONFIG_DEFAULT);
|
|
|
|
i2c_value = adm1272_i2c_get16(i2cdev, ADM1272_HYSTERESIS_HIGH);
|
|
g_assert_cmphex(i2c_value, ==, ADM1272_HYSTERESIS_HIGH_DEFAULT);
|
|
|
|
i2c_value = adm1272_i2c_get16(i2cdev, ADM1272_STRT_UP_IOUT_LIM);
|
|
g_assert_cmphex(i2c_value, ==, ADM1272_STRT_UP_IOUT_LIM_DEFAULT);
|
|
}
|
|
|
|
/* test qmp access */
|
|
static void test_tx_rx(void *obj, void *data, QGuestAllocator *alloc)
|
|
{
|
|
uint16_t i2c_value, value, i2c_voltage, i2c_pwr, lossy_value;
|
|
QI2CDevice *i2cdev = (QI2CDevice *)obj;
|
|
|
|
/* converting to direct mode is lossy - we generate the same loss here */
|
|
lossy_value =
|
|
adm1272_direct_to_millivolts(adm1272_millivolts_to_direct(1000));
|
|
qmp_adm1272_set(TEST_ID, "vin", 1000);
|
|
value = qmp_adm1272_get(TEST_ID, "vin");
|
|
i2c_value = adm1272_i2c_get16(i2cdev, PMBUS_READ_VIN);
|
|
i2c_voltage = adm1272_direct_to_millivolts(i2c_value);
|
|
g_assert_cmpuint(value, ==, i2c_voltage);
|
|
g_assert_cmpuint(i2c_voltage, ==, lossy_value);
|
|
|
|
lossy_value =
|
|
adm1272_direct_to_millivolts(adm1272_millivolts_to_direct(1500));
|
|
qmp_adm1272_set(TEST_ID, "vout", 1500);
|
|
value = qmp_adm1272_get(TEST_ID, "vout");
|
|
i2c_value = adm1272_i2c_get16(i2cdev, PMBUS_READ_VOUT);
|
|
i2c_voltage = adm1272_direct_to_millivolts(i2c_value);
|
|
g_assert_cmpuint(value, ==, i2c_voltage);
|
|
g_assert_cmpuint(i2c_voltage, ==, lossy_value);
|
|
|
|
lossy_value =
|
|
adm1272_direct_to_milliamps(adm1272_milliamps_to_direct(1600));
|
|
qmp_adm1272_set(TEST_ID, "iout", 1600);
|
|
value = qmp_adm1272_get(TEST_ID, "iout");
|
|
i2c_value = adm1272_i2c_get16(i2cdev, PMBUS_READ_IOUT);
|
|
i2c_value = adm1272_direct_to_milliamps(i2c_value);
|
|
g_assert_cmphex(value, ==, i2c_value);
|
|
g_assert_cmphex(i2c_value, ==, lossy_value);
|
|
|
|
lossy_value =
|
|
adm1272_direct_to_watts(adm1272_watts_to_direct(320));
|
|
qmp_adm1272_set(TEST_ID, "pin", 320);
|
|
value = qmp_adm1272_get(TEST_ID, "pin");
|
|
i2c_value = adm1272_i2c_get16(i2cdev, PMBUS_READ_PIN);
|
|
i2c_pwr = adm1272_direct_to_watts(i2c_value);
|
|
g_assert_cmphex(value, ==, i2c_pwr);
|
|
g_assert_cmphex(i2c_pwr, ==, lossy_value);
|
|
}
|
|
|
|
/* test r/w registers */
|
|
static void test_rw_regs(void *obj, void *data, QGuestAllocator *alloc)
|
|
{
|
|
uint16_t i2c_value;
|
|
QI2CDevice *i2cdev = (QI2CDevice *)obj;
|
|
|
|
adm1272_i2c_set16(i2cdev, PMBUS_VOUT_OV_WARN_LIMIT, 0xABCD);
|
|
i2c_value = adm1272_i2c_get16(i2cdev, PMBUS_VOUT_OV_WARN_LIMIT);
|
|
g_assert_cmphex(i2c_value, ==, 0xABCD);
|
|
|
|
adm1272_i2c_set16(i2cdev, PMBUS_VOUT_UV_WARN_LIMIT, 0xCDEF);
|
|
i2c_value = adm1272_i2c_get16(i2cdev, PMBUS_VOUT_UV_WARN_LIMIT);
|
|
g_assert_cmphex(i2c_value, ==, 0xCDEF);
|
|
|
|
adm1272_i2c_set16(i2cdev, PMBUS_IOUT_OC_WARN_LIMIT, 0x1234);
|
|
i2c_value = adm1272_i2c_get16(i2cdev, PMBUS_IOUT_OC_WARN_LIMIT);
|
|
g_assert_cmphex(i2c_value, ==, 0x1234);
|
|
|
|
adm1272_i2c_set16(i2cdev, PMBUS_OT_FAULT_LIMIT, 0x5678);
|
|
i2c_value = adm1272_i2c_get16(i2cdev, PMBUS_OT_FAULT_LIMIT);
|
|
g_assert_cmphex(i2c_value, ==, 0x5678);
|
|
|
|
adm1272_i2c_set16(i2cdev, PMBUS_OT_WARN_LIMIT, 0xABDC);
|
|
i2c_value = adm1272_i2c_get16(i2cdev, PMBUS_OT_WARN_LIMIT);
|
|
g_assert_cmphex(i2c_value, ==, 0xABDC);
|
|
|
|
adm1272_i2c_set16(i2cdev, PMBUS_VIN_OV_WARN_LIMIT, 0xCDEF);
|
|
i2c_value = adm1272_i2c_get16(i2cdev, PMBUS_VIN_OV_WARN_LIMIT);
|
|
g_assert_cmphex(i2c_value, ==, 0xCDEF);
|
|
|
|
adm1272_i2c_set16(i2cdev, PMBUS_VIN_UV_WARN_LIMIT, 0x2345);
|
|
i2c_value = adm1272_i2c_get16(i2cdev, PMBUS_VIN_UV_WARN_LIMIT);
|
|
g_assert_cmphex(i2c_value, ==, 0x2345);
|
|
|
|
i2c_set8(i2cdev, ADM1272_RESTART_TIME, 0xF8);
|
|
i2c_value = i2c_get8(i2cdev, ADM1272_RESTART_TIME);
|
|
g_assert_cmphex(i2c_value, ==, 0xF8);
|
|
|
|
i2c_set8(i2cdev, ADM1272_MFR_PMON_CONTROL, 0);
|
|
i2c_value = i2c_get8(i2cdev, ADM1272_MFR_PMON_CONTROL);
|
|
g_assert_cmpuint(i2c_value, ==, 0);
|
|
|
|
adm1272_i2c_set16(i2cdev, ADM1272_MFR_PMON_CONFIG, 0xDEF0);
|
|
i2c_value = adm1272_i2c_get16(i2cdev, ADM1272_MFR_PMON_CONFIG);
|
|
g_assert_cmphex(i2c_value, ==, 0xDEF0);
|
|
|
|
adm1272_i2c_set16(i2cdev, ADM1272_MFR_ALERT1_CONFIG, 0x0123);
|
|
i2c_value = adm1272_i2c_get16(i2cdev, ADM1272_MFR_ALERT1_CONFIG);
|
|
g_assert_cmphex(i2c_value, ==, 0x0123);
|
|
|
|
adm1272_i2c_set16(i2cdev, ADM1272_MFR_ALERT2_CONFIG, 0x9876);
|
|
i2c_value = adm1272_i2c_get16(i2cdev, ADM1272_MFR_ALERT2_CONFIG);
|
|
g_assert_cmphex(i2c_value, ==, 0x9876);
|
|
|
|
adm1272_i2c_set16(i2cdev, ADM1272_MFR_DEVICE_CONFIG, 0x3456);
|
|
i2c_value = adm1272_i2c_get16(i2cdev, ADM1272_MFR_DEVICE_CONFIG);
|
|
g_assert_cmphex(i2c_value, ==, 0x3456);
|
|
|
|
adm1272_i2c_set16(i2cdev, ADM1272_HYSTERESIS_LOW, 0xCABA);
|
|
i2c_value = adm1272_i2c_get16(i2cdev, ADM1272_HYSTERESIS_LOW);
|
|
g_assert_cmphex(i2c_value, ==, 0xCABA);
|
|
|
|
adm1272_i2c_set16(i2cdev, ADM1272_HYSTERESIS_HIGH, 0x6789);
|
|
i2c_value = adm1272_i2c_get16(i2cdev, ADM1272_HYSTERESIS_HIGH);
|
|
g_assert_cmphex(i2c_value, ==, 0x6789);
|
|
|
|
adm1272_i2c_set16(i2cdev, ADM1272_STRT_UP_IOUT_LIM, 0x9876);
|
|
i2c_value = adm1272_i2c_get16(i2cdev, ADM1272_STRT_UP_IOUT_LIM);
|
|
g_assert_cmphex(i2c_value, ==, 0x9876);
|
|
|
|
adm1272_i2c_set16(i2cdev, PMBUS_OPERATION, 0xA);
|
|
i2c_value = i2c_get8(i2cdev, PMBUS_OPERATION);
|
|
g_assert_cmphex(i2c_value, ==, 0xA);
|
|
}
|
|
|
|
/* test read-only registers */
|
|
static void test_ro_regs(void *obj, void *data, QGuestAllocator *alloc)
|
|
{
|
|
uint16_t i2c_init_value, i2c_value;
|
|
QI2CDevice *i2cdev = (QI2CDevice *)obj;
|
|
|
|
i2c_init_value = adm1272_i2c_get16(i2cdev, PMBUS_READ_VIN);
|
|
adm1272_i2c_set16(i2cdev, PMBUS_READ_VIN, 0xBEEF);
|
|
i2c_value = adm1272_i2c_get16(i2cdev, PMBUS_READ_VIN);
|
|
g_assert_cmphex(i2c_init_value, ==, i2c_value);
|
|
|
|
i2c_init_value = adm1272_i2c_get16(i2cdev, PMBUS_READ_VOUT);
|
|
adm1272_i2c_set16(i2cdev, PMBUS_READ_VOUT, 0x1234);
|
|
i2c_value = adm1272_i2c_get16(i2cdev, PMBUS_READ_VOUT);
|
|
g_assert_cmphex(i2c_init_value, ==, i2c_value);
|
|
|
|
i2c_init_value = adm1272_i2c_get16(i2cdev, PMBUS_READ_IOUT);
|
|
adm1272_i2c_set16(i2cdev, PMBUS_READ_IOUT, 0x6547);
|
|
i2c_value = adm1272_i2c_get16(i2cdev, PMBUS_READ_IOUT);
|
|
g_assert_cmphex(i2c_init_value, ==, i2c_value);
|
|
|
|
i2c_init_value = adm1272_i2c_get16(i2cdev, PMBUS_READ_TEMPERATURE_1);
|
|
adm1272_i2c_set16(i2cdev, PMBUS_READ_TEMPERATURE_1, 0x1597);
|
|
i2c_value = adm1272_i2c_get16(i2cdev, PMBUS_READ_TEMPERATURE_1);
|
|
g_assert_cmphex(i2c_init_value, ==, i2c_value);
|
|
|
|
i2c_init_value = adm1272_i2c_get16(i2cdev, PMBUS_READ_PIN);
|
|
adm1272_i2c_set16(i2cdev, PMBUS_READ_PIN, 0xDEAD);
|
|
i2c_value = adm1272_i2c_get16(i2cdev, PMBUS_READ_PIN);
|
|
g_assert_cmphex(i2c_init_value, ==, i2c_value);
|
|
}
|
|
|
|
/* test voltage fault handling */
|
|
static void test_voltage_faults(void *obj, void *data, QGuestAllocator *alloc)
|
|
{
|
|
uint16_t i2c_value;
|
|
uint8_t i2c_byte;
|
|
QI2CDevice *i2cdev = (QI2CDevice *)obj;
|
|
|
|
adm1272_i2c_set16(i2cdev, PMBUS_VOUT_OV_WARN_LIMIT,
|
|
adm1272_millivolts_to_direct(5000));
|
|
qmp_adm1272_set(TEST_ID, "vout", 5100);
|
|
|
|
i2c_value = adm1272_i2c_get16(i2cdev, PMBUS_STATUS_WORD);
|
|
i2c_byte = i2c_get8(i2cdev, PMBUS_STATUS_VOUT);
|
|
g_assert_true((i2c_value & PB_STATUS_VOUT) != 0);
|
|
g_assert_true((i2c_byte & PB_STATUS_VOUT_OV_WARN) != 0);
|
|
|
|
qmp_adm1272_set(TEST_ID, "vout", 4500);
|
|
i2c_set8(i2cdev, PMBUS_CLEAR_FAULTS, 0);
|
|
i2c_byte = i2c_get8(i2cdev, PMBUS_STATUS_VOUT);
|
|
g_assert_true((i2c_byte & PB_STATUS_VOUT_OV_WARN) == 0);
|
|
|
|
adm1272_i2c_set16(i2cdev, PMBUS_VOUT_UV_WARN_LIMIT,
|
|
adm1272_millivolts_to_direct(4600));
|
|
i2c_value = adm1272_i2c_get16(i2cdev, PMBUS_STATUS_WORD);
|
|
i2c_byte = i2c_get8(i2cdev, PMBUS_STATUS_VOUT);
|
|
g_assert_true((i2c_value & PB_STATUS_VOUT) != 0);
|
|
g_assert_true((i2c_byte & PB_STATUS_VOUT_UV_WARN) != 0);
|
|
|
|
}
|
|
|
|
static void adm1272_register_nodes(void)
|
|
{
|
|
QOSGraphEdgeOptions opts = {
|
|
.extra_device_opts = "id=" TEST_ID ",address=0x10"
|
|
};
|
|
add_qi2c_address(&opts, &(QI2CAddress) { TEST_ADDR });
|
|
|
|
qos_node_create_driver("adm1272", i2c_device_create);
|
|
qos_node_consumes("adm1272", "i2c-bus", &opts);
|
|
|
|
qos_add_test("test_defaults", "adm1272", test_defaults, NULL);
|
|
qos_add_test("test_tx_rx", "adm1272", test_tx_rx, NULL);
|
|
qos_add_test("test_rw_regs", "adm1272", test_rw_regs, NULL);
|
|
qos_add_test("test_ro_regs", "adm1272", test_ro_regs, NULL);
|
|
qos_add_test("test_ov_faults", "adm1272", test_voltage_faults, NULL);
|
|
}
|
|
libqos_init(adm1272_register_nodes);
|