You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qemu/hw/net/lan9118_phy.c

223 lines
6.0 KiB
C

/*
* SMSC LAN9118 PHY emulation
*
* Copyright (c) 2009 CodeSourcery, LLC.
* Written by Paul Brook
*
* Copyright (c) 2013 Jean-Christophe Dubois. <jcd@tribudubois.net>
*
* This code is licensed under the GNU GPL v2
*
* Contributions after 2012-01-13 are licensed under the terms of the
* GNU GPL, version 2 or (at your option) any later version.
*/
#include "qemu/osdep.h"
#include "hw/net/lan9118_phy.h"
#include "hw/net/mii.h"
#include "hw/irq.h"
#include "hw/resettable.h"
#include "migration/vmstate.h"
#include "qemu/log.h"
#include "trace.h"
#define PHY_INT_ENERGYON (1 << 7)
#define PHY_INT_AUTONEG_COMPLETE (1 << 6)
#define PHY_INT_FAULT (1 << 5)
#define PHY_INT_DOWN (1 << 4)
#define PHY_INT_AUTONEG_LP (1 << 3)
#define PHY_INT_PARFAULT (1 << 2)
#define PHY_INT_AUTONEG_PAGE (1 << 1)
static void lan9118_phy_update_irq(Lan9118PhyState *s)
{
qemu_set_irq(s->irq, !!(s->ints & s->int_mask));
}
uint16_t lan9118_phy_read(Lan9118PhyState *s, int reg)
{
uint16_t val;
switch (reg) {
case MII_BMCR:
val = s->control;
break;
case MII_BMSR:
val = s->status;
break;
case MII_PHYID1:
val = SMSCLAN9118_PHYID1;
break;
case MII_PHYID2:
val = SMSCLAN9118_PHYID2;
break;
case MII_ANAR:
val = s->advertise;
break;
case MII_ANLPAR:
val = MII_ANLPAR_PAUSEASY | MII_ANLPAR_PAUSE | MII_ANLPAR_T4 |
MII_ANLPAR_TXFD | MII_ANLPAR_TX | MII_ANLPAR_10FD |
MII_ANLPAR_10 | MII_ANLPAR_CSMACD;
break;
case MII_ANER:
val = MII_ANER_NWAY;
break;
case 29: /* Interrupt source. */
val = s->ints;
s->ints = 0;
lan9118_phy_update_irq(s);
break;
case 30: /* Interrupt mask */
val = s->int_mask;
break;
case 17:
case 18:
case 27:
case 31:
qemu_log_mask(LOG_UNIMP, "%s: reg %d not implemented\n",
__func__, reg);
val = 0;
break;
default:
qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad address at offset %d\n",
__func__, reg);
val = 0;
break;
}
trace_lan9118_phy_read(val, reg);
return val;
}
void lan9118_phy_write(Lan9118PhyState *s, int reg, uint16_t val)
{
trace_lan9118_phy_write(val, reg);
switch (reg) {
case MII_BMCR:
if (val & MII_BMCR_RESET) {
lan9118_phy_reset(s);
} else {
s->control = val & (MII_BMCR_LOOPBACK | MII_BMCR_SPEED100 |
MII_BMCR_AUTOEN | MII_BMCR_PDOWN | MII_BMCR_FD |
MII_BMCR_CTST);
/* Complete autonegotiation immediately. */
if (val & MII_BMCR_AUTOEN) {
s->status |= MII_BMSR_AN_COMP;
}
}
break;
case MII_ANAR:
s->advertise = (val & (MII_ANAR_RFAULT | MII_ANAR_PAUSE_ASYM |
MII_ANAR_PAUSE | MII_ANAR_TXFD | MII_ANAR_10FD |
MII_ANAR_10 | MII_ANAR_SELECT))
| MII_ANAR_TX;
break;
case 30: /* Interrupt mask */
s->int_mask = val & 0xff;
lan9118_phy_update_irq(s);
break;
case 17:
case 18:
case 27:
case 31:
qemu_log_mask(LOG_UNIMP, "%s: reg %d not implemented\n",
__func__, reg);
break;
default:
qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad address at offset %d\n",
__func__, reg);
break;
}
}
void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down)
{
s->link_down = link_down;
/* Autonegotiation status mirrors link status. */
if (link_down) {
trace_lan9118_phy_update_link("down");
s->status &= ~(MII_BMSR_AN_COMP | MII_BMSR_LINK_ST);
s->ints |= PHY_INT_DOWN;
} else {
trace_lan9118_phy_update_link("up");
s->status |= MII_BMSR_AN_COMP | MII_BMSR_LINK_ST;
s->ints |= PHY_INT_ENERGYON;
s->ints |= PHY_INT_AUTONEG_COMPLETE;
}
lan9118_phy_update_irq(s);
}
void lan9118_phy_reset(Lan9118PhyState *s)
{
trace_lan9118_phy_reset();
s->control = MII_BMCR_AUTOEN | MII_BMCR_SPEED100;
s->status = MII_BMSR_100TX_FD
| MII_BMSR_100TX_HD
| MII_BMSR_10T_FD
| MII_BMSR_10T_HD
| MII_BMSR_AUTONEG
| MII_BMSR_EXTCAP;
s->advertise = MII_ANAR_TXFD
| MII_ANAR_TX
| MII_ANAR_10FD
| MII_ANAR_10
| MII_ANAR_CSMACD;
s->int_mask = 0;
s->ints = 0;
lan9118_phy_update_link(s, s->link_down);
}
static void lan9118_phy_reset_hold(Object *obj, ResetType type)
{
Lan9118PhyState *s = LAN9118_PHY(obj);
lan9118_phy_reset(s);
}
static void lan9118_phy_init(Object *obj)
{
Lan9118PhyState *s = LAN9118_PHY(obj);
qdev_init_gpio_out(DEVICE(s), &s->irq, 1);
}
static const VMStateDescription vmstate_lan9118_phy = {
.name = "lan9118-phy",
.version_id = 1,
.minimum_version_id = 1,
.fields = (const VMStateField[]) {
VMSTATE_UINT16(status, Lan9118PhyState),
VMSTATE_UINT16(control, Lan9118PhyState),
VMSTATE_UINT16(advertise, Lan9118PhyState),
VMSTATE_UINT16(ints, Lan9118PhyState),
VMSTATE_UINT16(int_mask, Lan9118PhyState),
VMSTATE_BOOL(link_down, Lan9118PhyState),
VMSTATE_END_OF_LIST()
}
};
static void lan9118_phy_class_init(ObjectClass *klass, void *data)
{
ResettableClass *rc = RESETTABLE_CLASS(klass);
DeviceClass *dc = DEVICE_CLASS(klass);
rc->phases.hold = lan9118_phy_reset_hold;
dc->vmsd = &vmstate_lan9118_phy;
}
static const TypeInfo types[] = {
{
.name = TYPE_LAN9118_PHY,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(Lan9118PhyState),
.instance_init = lan9118_phy_init,
.class_init = lan9118_phy_class_init,
}
};
DEFINE_TYPES(types)